This step by step diy project is about 8×16 5 cord firewood shed plans. I have designed this super large firewood shed so you can store 5 cords of wood with style. This wood shed has a lean to roof and a wide front opening, for easy access inside. The other 3 sides of the shed are enclosed with slats. The walls have small gaps between the slats, so you let the air speed up the drying up process. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.
Projects made from these plans
5 Cord Firewood Shed Plans
Building-a-5-cord-wood-shed
Cut & Shopping Lists
- A – 2 pieces of 2×6 lumber – 192″ long, 9 pieces – 93″ long FLOOR FRAME
- B – 4 pieces of 4×4 lumber – 192″ long SKIDS
- C – 21 pieces of 2×4 lumber – 192″ long DECKING
- D – 3 pieces of 2×4 lumber – 54 1/2″ long, 3 pieces – 78 1/2″ long, 2 pieces – 61 3/4″ long, 2 pieces – 86 3/4″ long POSTS
- E – 2 pieces of 2×6 lumber – 18′ long SUPPORT BEAMS
- 2 pieces of 2×6 pressure treated lumber – 16 ft
- 9 pieces of 2×6 pressure treated lumber – 8 ft
- 4 pieces of 4×4 pressure treated lumber – 16 ft
- 21 pieces of 2×4 lumber – 16 ft
- 6 pieces of 2×4 lumber – 8 ft
- 2 pieces of 2×4 lumber – 10 ft
- 2 pieces of 2×6 lumber – 18 ft
- T strong tie
- 2 1/2″ screws, 3 1/2″ screws
- 3″ lag screws
- rafter ties
- 1 1/2″ structural screws
- wood filler , wood glue, stain/paint
Tools
Hammer, Tape measure, Framing square, Level
Miter saw, Drill machinery, Screwdriver, Sander
Time
One day
Related
How to build a 8×16 wood shed
Build-the-floor-for-a-5-cord-wood-shed
First, you need to build the floor frame. Drill pilot holes through the 16 ft joists and insert 3 1/2″ screws into the perpendicular components. Align the edges flush and check if the corners are square. Place the joists every 24″ on center.
Select the location for the shed and level the surface thoroughly. Compact a 34″ layer of gravel under the shed, because that will help with draining the excess moisture.
Fitting the skids
Use 4×4 lumber for the skids. It would be a great idea to use pressure treated lumber. Fit the skids under the floor frame, and use 2 rafter ties for each skid. Insert 1 1/2″ structural screws to secure the ties into place.
Fitting the floor slats
Next, fit the 2×4 slats to the floor frame. Fit a piece of 1 1/8″ wood between the slats to create even gaps. Align the edges at both ends, drill pilot holes and insert 2 1/2″ screws to lock them to the floor frame.
Building the shed walls
Corner-posts-for-5-cord-wood-shed
Use 2×4 lumber for the posts. Cut the posts at the right dimensions, as shown in diagram.
Attaching the posts
Attach them to the corners of the floor frame, as shown in the diagram. Use a spirit level to plumb the posts. Drill pilot holes and insert 3″ lag screws to lock them to the floor frame. Drill pilot holes and lock the adjacent posts together tightly with 2 1/2″ screws. Add construction glue to the joints.
Fitting-the-support-beams
Use 2×6 lumber for the support beams. Fit the beams to the front and to the back of the shed. Drill pilot holes and insert 3″ lag screws into the posts. Use a spirit level to make sure the beams are perfectly horizontal. Use T ties to secure the middle posts to the support beam Secure the tie into place with 1 1/2″ structural screws.
Finishing touches
5 cord Wood Shed – side view
Check PART 2 of the project, to learn more on how to build the roof.
5 cord Wood Shed – front view
5-cord-diy-wood-shed-plans
This 8×16 wood shed is ideal for any homeowner, as it will shelter the firewood from the weather, while adding a touch of unique charm to your backyard. You should also check out my 3 cord firewood shed plans. I have many design ideas on this blog, so make sure you take a look over all the alternatives before taking a decision. Premium Plans for this project available in the Shop.
If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.
This woodworking project was about 8×16 wood shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.
EXPLORE MORE IDEAS FOR:
 |
 |
 |
 |
8 comments
In the parts list it look like 2×6 lumber should be 16ft vs 18ft
Why? They are 18 ft, look at the side overhangs
Makes sense looked at the wrong place. It’s the roof overhanging a foot on each side.
Question why do 2×4 vs a 1×6 or 5/8 by 6 for the decking?
Are there benefits to having thicker wood there?
Yes, it supports weight better.
I used 1×6 and it saved me $140. Seems sturdy enough for a wood shed.
Why not buy 10’ metal roofing? The trusses are 120”.
You can use that, if available.