This step by step diy woodworking project is about kids picnic table plans. Building a wooden picnic table for your kids can be done in just a day with proper plans and an accurate planning, even if you are a woodworking amateur. Use 2x4s and 2x6s to create a sturdy outdoor table for your kids. If this design isn’t what you are looking for, we suggest you to check out the rest of the projects featured on our site or to adjust it to suit your needs. Premium Plans for this project available in the SHOP.
There are many plans and designs to choose from when building the table for your kids, so make sure you take a close look over the related projects before starting the actual construction project. Moreover, we recommend you to invest in high quality materials, especially if you are going to place the table in your backyard. Involve the kids in the project and try to take their suggestions into account, when it comes to the design and color of the table. See all my Premium Plans HERE.
Projects made from these plans
It’s that easy to build a kids table!
[tabs tab1=”Materials” tab2=”Tools” tab3=”Time” tab4=”Related Plans”]
- A – 4 pieces of 2×4 lumber – 29″ long LEGS
- B – 2 pieces of 2×4 lumber – 22 3/4″ long, 2 pieces – 42″ long SUPPORTS
- C – 4 pieces of 2×6 – 48″ long, 4 pieces of 2×4 lumber – 48″ long SLATS
- D – 1 pieces of 2×4 – 37″ long, 2 pieces – 21 1/2″ long BRACES
- 6 pieces of 2×4 lumber – 8′
- 2 pieces of 2×6 lumber – 8′
- 100 pieces of 2 1/2″ screws
- 16 pieces of 3 1/2″ carriage bolts
- wood filler, glue
- wood stain
Kids picnic table plans
Top Tip: Building a small picnic table for your kids is a fairly easy woodworking project, but any person can get the job done is less than a day if the right plans are used from the very beginning.
Building a kids picnic table
The first step of the project is to make the wooden tabletop, by using the information shown in the plans. As you can easily see in the image, we recommend you to work on a level surface, otherwise the end result might not satisfy your tastes. Cut both ends of the supports at 45 degrees.
Leave 1/4″ between the 2×6 slats and align them at both ends properly. Attach the supports to the slats and toe nail them into place with 2 1/2″ galvanized screws (alternatively you can drill pocket holes through the supports). Pre-drill holes to prevent the wood from splitting. Insert at least 2″ screws in each slat for each support.
The next step of the project is to attach the 2×4 legs to the frame of the tabletop. Cut both ends of the legs at 30 degrees by using a good circular or miter saw. Attach the legs to the supports and lock them into place with 2 1/2″ galvanized screws. Alternatively, you can drill pilot holes through both the legs and the supports and use 3 1/2″ bolts. Use 2 screws/bolts for each joint.
Top Tip: Aligning the legs into place before inserting the screws is essential for the end result, so make sure you pay attention to this step. Add waterproof glue to the joints in order to enhance the rigidity of the structure.
Build the legs from 2×4 lumber by making 30 degree cuts to both ends.
Next, you should attach the seat supports to the legs, as it can be noticed in the image. Make sure you cut both ends of the supports at 45 degrees before attaching them to the legs, in order to enhance the look of the picnic table.
Place a good spirit level on top of the supports before inserting the screws, in order to make sure they are perfectly horizontal. Drill pilot holes both through the legs and supports and insert 3 1/2″ carriage bolts. 2 bolts for each joint will create a strong bond between the components.
Attach 2×4 or 2×6 slats to the seat supports, making sure you leave about 1/4″ between them to enhance the water drainage. Align the slats at both ends before inserting the 2 1/2″ screws. Use 2 screws for each slat, at both ends.
If you really want to build a sturdy and durable picnic table, we recommend you to pay attention to the details shown in the image. First of all, you need to install the support between the two sides of the picnic table and lock them into place with 2 1/2″ galvanized screws. Center the support, drill pilot holes through the seat supports and insert the screws.
Build the braces and lock them into place with 2 1/2″ screws. Align the braces at both ends and lock them to the frame with screws, after making sure the sides of the picnic table are plumb.
After assembling the table, double check all the joints. In addition, smooth the sharp edges with sandpaper or with a router.
One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
Top Tip: In order to protect the lumber from water damage, we recommend you to cover the components with several coats of paint. Place the wooden kids picnic table in a proper location and move it whenever necessary. Premium Plans for this project available in the SHOP.
This woodworking project was about kids picnic table plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.