Home Bed Triple Bunk Bed Plans

Triple Bunk Bed Plans

by Ovidiu

 

This step by step diy woodworking project is about triple bunk bed frame plans. If you want to build a three bunk bed, you should check my step by step instructions. I have designed this bunk bed so you can save time and use just common materials and tools. Make sure you take a look over the rest of plans to see alternatives and more projects for your garden.

Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue to the joints, in order to enhance the rigidity of the structure. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

Triple Bunk Bed Plans

Building-a-triple-bunk-bed

Building-a-triple-bunk-bed

 

Cut & Shopping Lists

  • A – 2 piece of 2×6 lumber – 76″ long, 2 pieces – 43″ long 3xBED FRAME
  • B – 3 pieces of 2×4 lumber – 76″ long 3xCLEATS
  • C – 16 pieces of 1×4 lumber – 40″ long SUPPORT SLATS
  • D – 5 pieces of 2×2 lumber – 69″ long, 4 pieces – 44 1/4″ long LEGS
  • E – 2 pieces of 1×4 lumber – 40″ long SUPPORTS
  • F – 2 piece of 1×4 lumber – 76″ long, 2 pieces – 59″ long, 4 pieces – 43″ long RAILS
  • G – 4 pieces of 1×4 lumber – 21″ long, 2 pieces – 43″ long RAILS
  • H – 1 piece of 1×2 lumber – 79″ long, 1 piece – 62″ long, 3 pieces – 46″ long, 2 pieces – 24″ long TRIMS
  • I – 8 pieces of 2×2 lumber – 15 1/2″ long STEPS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building a triple bunk bed

Assembling-the-bed-frame

Assembling-the-bed-frame

The first step of the project is to build the bed frame for the triple bunk bed. Cut the components from 2×6 lumber. Align the edges flush, making sure the corners are square. Drill pilot pocket holes at both ends of the 76″ long components and insert 2 1/2″ screws to lock them together tightly. Add waterproof glue to the joints.

fitting-the-support-cleats

Fitting-the-support-cleats

Next, attach the 2×4 cleats to the bed frames. Drill pilot holes through the cleats and insert 2 1/2″ screws to lock them into place. Add glue to the joints and make sure the corners are square.

fitting-the-support-slats

Fitting-the-support-slats

Attach the 1×4 support slats to the cleats. Cut a 1 1/4″ wide block of wood and fit it between the slats so you create even gaps between the components. Drill pilot holes and insert 1 1/4″ screws to secure them into place tightly.

Assembling-the-bunk-bed

Assembling-the-bunk-bed

Attach 2×2 lumber to the two bed frames. Use a spirit level to make sure the legs are plumb and to check if the frames are horizontal. Drill pilot holes and insert 2 1/2″ screws.

Attaching-third-bed

Attaching-third-bed

The next step of the project is to attach the third bed frame to the bunk bed. Attach the 2×2 legs to the end of the bed frame. In addition, attach the 1×4 supports so you can secure the third bed frame to the top bed frame.

fitting-the-rails-for-the-third-bed

Fitting-the-rails-for-the-third-bed

Attach 1×4 rails to the third bed frame. Drill pocket holes at both ends of the slats and secure them to the legs with 1 1/4″ screws. Add glue to the joints for a neat result.

fitting-the-bed-rails

Fitting-the-bed-rails

Attach 1×4 slats as rails to the top bed frame. Drill pocket holes at both ends of the slats and secure them to the legs with 1 1/4″ screws. Leave no gaps between the components.

fitting-the-ladder-steps

Fitting-the-ladder-steps

Attach the 2×2 steps to the ladders. Drill pocket holes at both ends of the steps and secure them to the ladder supports with 2 1/2″ screws. Make sure the corners are square and add waterproof glue to the joints.

fitting-the-top-trims

Fitting-the-top-trims

Attach 1×2 trims to the top of the rails. Cut the ends at 45 degrees for the joints. Align the edges flush and use 1 1/2″ brad nails to secure them into place tightly.

triple-bunk-bed

Triple-bunk-bed

Fit the mattresses to the bed frames. I have designed this triple bunk bed so you can fit single mattresses.

triple-bunk-bed-plans

Triple-bunk-bed-plans

Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-200 grit sandpaper and remove the residues with a damp cloth.

Top Tip: Apply a few coats of paint or stain to the components, to enhance the look of the project. Don’t forget to LIKE, SHARE and Pin this project, if you’ve enjoyed it.

 

 

This woodworking project was about triple bunk bed frame plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

6 comments

Rigo Chaparro -

How do I get your plans

Reply
Candice Henderson -

I have no website but I would LOVE to be able to print your plans for the triple bunk beds. I like the very simple ones with two singles over each other and the third bunk partially in between them. My husband would make them for our grandchildren to sleep in a bunkie at the cottage. Can you help me please Ovidiu?

Reply
Ovidiu -

Yes, read the FAQs: https://myoutdoorplans.com/faq/

Reply
Cody Price -

Love to get the plans for the triple bunk bed

Reply
Michael Clevenger -

Hi Ovidiu, do you have the triple bunk plans with a Queen on bottom and 1 twin on second and third level?

Reply

Leave a Reply to Rigo Chaparro Cancel Reply