Easy Chicken Coop Plans

This step by step diy project is about easy chicken coop plans. Building a small backyard chicken coop is a complex project, but the construction will be durable. However, there are many plans that you can choose from when building the backyard chicken coop, so you should really pay attention to the related projects on this site before starting the actual construction of the shelter. Premium Plans for this project available in the Shop.

You should notice this woodworking plans comes with 3D diagrams, step by step instructions and a full Cut / Shopping list. The plans are also Print friendly and you can even download them as a PDF file. However, you should know all my plans are for personal use only!

It is essential to use weather-resistant lumber when building the chicken coop, so make sure you select the components with attention. Moreover, take accurate measurements before making the cuts, otherwise the components might not fit together. Adjust the size of the chicken coop according to your needs, but make sure you follow the instructions described in this article. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

It’s that simple to build a chicken coop!

 

 

Easy Chicken Coop Plans

Building-an-easy-chicken-coop

Building-an-easy-chicken-coop

 

Cut + Shopping List

  • A – 2 pieces of 2×2 lumber – 72″ long, 3 pieces – 45″ long, 9 pieces – 6″ long, 3 pieces – 48″ long BASE
  • B – 1 pieces of 3/4″ plywood – 48″x72″ long FLOORING
  • C – 6 pieces of 2×2 lumber – 21” long, 4 pieces – 72″ long, 2 pieces – 45″ long STUDS
  • D – 2 pieces of 3/4″ plywood – 24″x73 1/2″ long, 2 pieces – 48″x48″ long WALLS
  • E – 1 pieces of 2×2 lumber – 72″ long, 8 pieces – 32 1/2″ long RAFTERS
  • F – 2 pieces of 3/4″ plywood – 81 1/2″x38″ long ROOF

  • 13 pieces of 2×2 lumber – 8 ft
  • 3 pieces of 2×2 lumber – 10 ft
  • 6 pieces of 3/4″ plywood – 4’x8′
  • hinges
  • 100 pieces of 2 1/2″ screws
  • 100 pieces of 1 1/4″ screws
  • 2″ brad nails
  • chicken wire
  • tar paper, asphalt shingles
  • wood glue, stain/paint
  • wood filler

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Step 1: Building the floor for easy chicken coop

Building-the-floor-frame-for-coop

Building-the-floor-frame-for-coop

The first step of the woodworking project is to build the base of the chicken coop. Therefore, we recommend you to build the floor out of 3/4′ plywood and the frame out of 2×2 lumber. Cut the 2×2 components at the right size and lock them together with 2 1/2″ pocket screws.

Additionally, center the frame to the plywood sheet and drill pilot holes. Next, insert 1 1/4″ screws into the frame and add glue to create a rigid structure.

Fitting the legs

Fitting the legs

Continue the woodworking project by attaching the 2×2 legs to the base of the chicken coop. Cut the components out of 2×2 lumber after taking accurate measurements.

Next, drill pocket holes at both ends of the vertical supports and insert 2 1/2″ screws into the horizontal supports. Make sure the corners are square and leave no gaps between the components. Work with attention and add glue to the joints.

 

Step 2: Building the wall frames

Building-the-side-wall-frames

Building-the-side-wall-frames

Continue the project by attaching the side walls to the chicken coop. As you can easily notice in the plans, we recommend you to assemble the walls out of 2×2 lumber on a level surface.

However, you have to drill pilot holes through the top and bottom plates and insert 2 1/2″ screws into the studs. Make sure the corners are square ad drill pilot holes through the bottom plates before inserting 2 1/2″ screws into the floor.

Fitting the supports

Fitting the supports

Continue the assembly by attaching the horizontal supports to the structure. Drill pocket holes at both ends of the 2×2 components and fit them between the sides of the chicken coop.

 

Step 3: Fitting the exterior wall panels

Building the exterior walls

Building the exterior walls

It is essential to mark the cut lines to the 3/4″ plywood sheets before making the cuts with a circular saw. Also, make sure you create the door and window openings properly, before attaching them to the frame. Smooth the cut edges with sandpaper thoroughly.

Attaching the exterior walls

Attaching the exterior walls

Next, attach the plywood walls to the wooden structure and secure them into place by using 1 1/4″ galvanized screws. In addition, use metal hinges to lock the door and the window shutters into place. Align everything with attention and secure the walls to the frame tightly.

 

Step 4: Building the chicken coop roof

Fitting-the-rafters

Fitting-the-rafters

Build the top ridge out of 2×2 lumber and secure it to the top of the roof using galvanized screws. Similarly, place a spirit level on top of the slat to to make sure it is perfectly horizontal.

Top Tip: In addition, build the rafters out of 2×2 lumber, making sure you cut one end at 45 degrees. Fit the rafters into place and secure them to the structure with 2 1/2′ screws, after drilling pilot holes.  

Fitting the roofing sheets

Fitting the roofing sheets

Afterwards, attach the 3/4″ plywood roof to the chicken coop. Cut the components out of 3/4″ plywood and secure them to the rafters with 1 1/4″ screws. Leave no gaps between the components and make sure the front and the back overhangs are equal.

Attaching the shingles

Attaching the shingles

One of the last steps of the project is to attach the roofing to the plywood sheets. Therefore, we recommend you to cover the roof with tar paper. Staple the tart paper to the plywood roof and afterwards attach the asphalt shingles. Take accurate measurements and secure the shingles to the roof using appropriate nails.

Easy chicken coop plans

Easy chicken coop plans

After building the frame of the chicken coop we recommend you to take care of the finishing touches. Therefore, check if all the components are locked together tightly and aligned properly. Premium Plans for this project available in the Shop.

Top Tip: Don’t forget to take a look over the rest of the project, if you want to learn how to build the nesting box for the chickens. In addition, in the next parts of the project we show you how to fit the trims.

 

 

This woodworking project was about easy chicken coop plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook to be the first that gets our latest updates and submit pictures with your DIY projects.

 

Next

 




59 Comments

  1. dillon
    • Julian
  2. Alton
  3. Erika
  4. k-ann
    • Julian
  5. Robin
  6. Jeanne
    • Jack
    • KimF
      • Ovidiu
      • Nick Hardigg
      • Ovidiu
  7. Monique
    • Ovidiu
      • Monica Madrid
      • Ovidiu
  8. Tyler
    • Ovidiu
  9. Andy
    • Ovidiu
      • Andy
  10. Dave
    • Ovidiu
  11. Mattie
    • Ovidiu
  12. Morgan
    • Ovidiu
  13. dianne
  14. Robert
  15. Eli
    • Ovidiu
  16. Elli.D
  17. Jennifer
    • Ovidiu
  18. Donut Jones
  19. Chuck Antich
  20. Chicken Little
    • Ovidiu
  21. jason
  22. Robin
    • Ovidiu
  23. Robert B Snyder
    • Ovidiu
  24. Rick foley
    • Ovidiu
  25. Kathi Bates
    • Ovidiu
  26. Patricia
  27. mickyy mouse
  28. Greg
    • Ovidiu
      • Greg
  29. Michael Warrior
  30. Feli
  31. Jade

Reply Cancel Reply

error: Content is protected !!