Home 2x4 2×4 shelving plans

2×4 shelving plans

by Ovidiu

 

This step by step woodworking project is about 2×4 shelving plans. This article features detailed instructions for building sturdy 2×4 shelving. The best part of this project is that you can build these sturdy shelves using only 2x4s. You can place the shelves in your garage, basement or even in the closet. The total cost of the materials should be less than 50 dollars. We have designed the plans to keep the expenditures under control and to involve the least amount of work possible. It is an ideal project for a beginner.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the shelves won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

2×4 Shelving Plans

Building 2x4 Shelving Plans

Building 2×4 Shelving Plans

 

Cut & Shopping Lists

  • A – 6 pieces of 2×4 lumber – 72″ long LEGS
  • B – 12 pieces of 2×4 lumber – 21″ long SUPPORTS
  • C – 20 pieces of 2×4 lumber – 96″ long SHELVES

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build 2×4 shelving

Building the supports

Building the supports

The first step of the project is to build the supports for the 2×4 shelving. As you can easily notice in the diagram, we recommend you to build the components out of 2×4 lumber. Cut the slats at the right dimensions and drill pocket holes at both ends of the horizontal components. Make sure the corners are square and insert 2 1/2″ screws to lock everything together tightly. Add glue to the joints and remove the excess with a damp cloth.

Building the frame for the shelves

Building the frame for the shelves

Build several supports for the shelving, according to the dimensions you chose for your project. In the above example, you need three supports for a 96″ wide storage unit.

Fitting the shelves slats

Fitting the shelves slats

Plumb the supports with a spirit level before attaching the 2×4 slats into place. Fit the slats equally spaced, leaving 3/4″ between the components. Place a piece of 3/4″ plywood between the slats to create consistent gaps.

2x4 Shelving Plans

2×4 Shelving Plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper. Use 2 1/2″ screws to secure the shelves to wall studs. Although it might not look, the 2×4 shelving are very sturdy and durable.

Top Tip: If you want to enhance the look of the project and to protect the wooden shelves from decay, we recommend you to cover the components with paint or stain.

 

 

This woodworking project was about 2×4 shelving plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

5 comments

Steve -

Will these shelves be sturdy enough without mounting to a wall?

Reply
Julian -

Yes, the shelves are very sturdy on their own. But it also depends on what you are going to store on them.

Reply
Joseph -

It would be great if you could make some plans showing how to make a corner unit in this style. ie: is it as simple as making 2 and bolting them together in an ‘L’ shape or are there other design considerations that should be followed?

Reply
Joseph -

Could the 2×4 slats be replaced with 1×3 slats instead? If so, could it be a straight-up replacement or would an extra 2×4 support under the slats between each of the main supports be necessary?

Reply
Sam -

Might be a silly question. But i get the 16, 12 and 20 part of lumber needed but then it says 29 needed?

Reply

Leave a Reply to Julian Cancel Reply