Home Playhouse 6×6 Simple Playhouse Roof Plans

6×6 Simple Playhouse Roof Plans

by Ovidiu

 

This step by step diy project is about free playhouse with porch roof plans. This is PART 2 of the simple playhouse project, where I show you how to build the gable roof. The roof for this 6×6 playhouse has a 45 degree slope, for an elegant look and an amazing design. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

6×6 Simple Playhouse Roof Plans

Building-a-simple-playhouse

Building-a-simple-playhouse

 

Cut & Shopping Lists

  • F – 2 pieces of 3/4″ plywood – 24″x27 1/2″ long, 2 pieces – 36″x48″ long WALLS
  • G – 12 pieces of 2×4 lumber – 60″ long, 4 pieces – 24 1/4″ long, 2 pieces – 34 1/2″ long RAFTERS
  • H – 2 pieces of 3/4″ plywood – 48″x72″ long, 2 pieces – 12″x72″ long ROOF
  • I – 100 sq ft of tar paper, 100 sq ft of asphalt shingles ROOFING
  • J – 4 pieces of 2×6 lumber – 61 1/2″ long, 2 pieces of 1×6 lumber – 73 1/2″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets the latest plans and for some other exclusive content. Also, follow me on Pinterest and Instagram to get many ideas for your backyard from all the internet! Check out my YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a playhouse gable roof

Rafters

Rafters

The first step of the project is to build the rafters for the 6×6 playhouse. As you can easily notice in the diagram, you need to use 2×4 lumber for the rafters. Make a 45 degree cut to one end of the slats and then make the birdmouths cuts, so you can lock them into place tightly.

Fitting the gussets

Fitting the gussets

Continue the project by assembling the trusses. Lay the rafters on a level surface and then fit the 1/2″ plywood gussets over the joint, to reinforce them. Insert 1 5/8″ screws to lock the rafters together tightly.

Fitting-the-trusses

Fitting-the-trusses

Fit the trusses to the top of the playhouse, every 16″ on center, as shown in the diagram. Use a spirit level to plumb the trusses and then lock them into place with screws or rafter ties.

Gable end supports

Gable end supports

Use 2×4 lumber for the gable end supports. Drill pocket holes at both ends of the supports and then lock them into place tightly with 2 1/2″ screws.

Fitting the roof sheets

Fitting the roof sheets

Fit the 3/4″ plywood sheets to the top of the playhouse. Align the sheets with attention and leave no gaps between them. Insert 1 5/8″ screws every 8″ along the framing, for a professional result.

Roof trims

Roof trims

Use 2×6 lumber for the front and back roof trims. Make 45 degree cuts to one end of the rafters and then secure them into place with 2 1/2″ screws. Align the edges flush, drill pilot holes and then insert the screws to prevent the wood from splitting.

Side roof trims

Side roof trims

Fit the 1×6 side trims, as well. Align the edges flush and insert 2″ nails to lock them into place tightly.

Fitting the roofing

Fitting the roofing

Cover the roof of the playhouse with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a 12″ piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

6x6 Simple Playhouse Plans - Front view

6×6 Simple Playhouse Plans – Front view

This playhouse is easy to build, sturdy and it has a nice design.The barn style roof is rustic and has a super charming appeal. Check out PART 1 of the project to lean how to build the frame of the playhouse and PART 3 to learn how to build the railings and how to install the trims.

 

 

This woodworking project was about playhouse roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Alex -

Does this playhouse need to somehow be anchored to the ground for stability?

Reply
Ovidiu -

You could use some shed anchors, if you are extra cautious: https://amzn.to/2ybKTyF

Reply

Leave a Reply to Ovidiu Cancel Reply