Home Bench DIY Planter Bench Plans

DIY Planter Bench Plans

by Ovidiu

 

This step by step diy woodworking project is about diy planter bench plans. This article features detailed instructions for building an outdoor bench with two planters. The bench is build almost entirely from 2×4 lumber, except for the top trims and for the seat which require 1×6 lumber.  Take a look over the rest of our woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image   

 

 

DIY Planter Bench Plans

Building-a-planter-bench

Building-a-planter-bench

 

Cut & Shopping Lists

  • A – 48 pieces of 2×4 lumber – 15″ long, 2 pieces – 8″ long PLANTERS
  • B – 2 pieces of 2×4 lumber – 84″ long, 5 pieces – 12″ long, 2 pieces – 14 1/2″ long, 2 pieces – 8″ long FRAME
  • C – 3 pieces of 1×6 lumber – 53″ long SEAT
  • D – 8 pieces of 1×6 lumber – 17″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a planter bench

First layer

First layer

First of all you need to assemble the planters for the bench. Cut the components from 2×4 lumber at 15″. However, if you want to make the planters smaller or larger, you can adjust the size of the slats.

Second layer

Second layer

Next, you need to attach the second layer to the bottom slats. Align the edges, making sure the corners are square. Drill pilot holes and insert 2 1/2″ galvanized screws to make sure the joints are rigid.

Building the planters

Building the planters

Continue adding more layers to the planter, till you get to the desired height. Adjust according to the wanted height of your seat.

Building-the-seat-frame

Building-the-seat-frame

Use 2×4 lumber to build the frame for the bench. Cut the components at the right size. Drill pilot holes through the long components and insert 2 1/2″ screws into the supports. Make sure the corners are square and add waterproof glue to the joints.

Fitting the seat frame

Fitting the seat frame

Attach the seat frame to the planters. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws to lock the components together tightly.

Fitting the side planter

Fitting the side planter

Continue building the planter on one side of the bench. Add the 2×4 components and lock them into place with 2 1/2″ screws. Add waterproof glue to the joints.

Frame-under-the-top-trims

Frame-under-the-top-trims

On the opposite planter, you need to build a small frame and attach it into place. This frame will support the top trims. Drill pilot holes and insert 2 1/2″ screws to assemble the frame. Make sure the corners are square. Fit the frame to the set and lock it into place with 2 1/2″ screws.

Fitting the top trims

Fitting the top trims

Use 1×6 lumber for the top trims. However, you need to adjust the width of the trims to 4 1/2″. Cut both ends of the slats at 45 degrees and lock them into place with 2″ brad nails.

Attaching-the-seat-slats

Attaching-the-seat-slats

Use 1×6 slats for the seat of the bench. Use 2″ brad nails to lock the seat slats into place.

Planter Bench Plans

Planter Bench Plans

After assembling the planter bench, you should take care of the finishing touches.

DIY Planter Bench Plans

DIY Planter Bench Plans

Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-220 grit sandpaper and remove the residues with a damp cloth.

Top Tip: Apply a few coats of paint or stain to the components, to enhance the look of the project.

 

 

This woodworking project was about diy planter bench plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

4 comments

Scott -

Just a heads up – the bench planks made from the 1×6’s should be cut to 53″, not 42″ as listed in the cut list on top. Luckily the other end of the board was long enough to cover space.

Reply
Julian -

Thank you for letting me know and I’m sorry for the error. I modified the cut list. I would love to see how your bench came out after you get the job done. Good luck with the project!

Reply
Jeremy B. -

I just completed and will post some additional pics. I had some fun trying to put wire mesh and weed barrier for potting plants. Also didnt understand how to attach the main frame to the two ends. In the end I got a Kregg Jig.

Reply

Leave a Reply to Ovidiu Cancel Reply