This step by step diy woodworking project is about 2×4 planter box plans. I had many requests for more 2×4 projects, so the natural step was to design this beautiful and simple garden planter box. This planter box is super easy to build and extremely sturdy. If you enjoy my design, don’t forget to take a look over the rest of my free plans HERE.
There are so many designs and materials to choose from, that we really recommend you to spend some time researching the most suitable plans for your needs. If you still haven’t found what you are looking for, we strongly recommend you to pay attention to these instructions and to check out the related projects, if you want to get more ideas and potential projects for your home and garden.
Projects made from these plans
2×4 Planter Box – Free DIY Plans
- A – 5 pieces of 2×4 lumber – 18″ long, 2 pieces – 20 1/2″ long 2xSIDE
- B – 2 pieces of 2×4 lumber – 20″ long, 2 pieces – 18″ long, 2 pieces – 17″ long 2xSIDE
- C – 2 pieces of 2×4 lumber – 14″ long, 4 pieces – 14 1/2″ long BOTTOM
- D – 2 pieces of 2×4 lumber – 21″ long, 2 pieces – 21 1/2″ long TRIMS
2×4 Planter Box Plans
The first step of the project is to build the side panels for the 2×4 planter box. Therefore, cut all the components at the right dimensions, as shown in the diagram. Lay the horizontal cleats on a level surface and then attach the vertical slats. Align the slats at both ends so that the cleats overhang the panel 1 1/2″ on both sides. Drill pilot holes through the slats and then insert 2 1/2″ screws into the cleats. Leave no gaps between the slats.
Assemble the other 2 panels for the planter box. Use the same techniques described above to assemble the panels.
The next step of the project is to assemble the 4 sides together tightly. Make sure the edges are flush and check if the corners are right angled. Drill pilot holes through the blue panels and insert 2 1/2″ screws into the perpendicular panels.
Fit the 2×4 cleats to the interior of the planter box. Cut the cleats at 14″ and then secure them into place with 2 1/2″ screws. Align the edges with attention.
Fit the 2×4 slats to the cleats. Drill a few holes into the slats to make sure the excess water drains properly.
Use 2×4 lumber for the top trims. Use a miter saw to make 45 degree cuts to both ends of the trims. Align the trims into place and then secure them into place with 2 1/2″ nails.
The next step of the project is to take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to enhance look of the planter box.
This is a simple woodworking project, so any person with basic diy skills can get the job done in a few hours. If you like my project, I recommend you to take a look over the rest of my woodworking plans HERE. See all my planter box plans HERE. Choose from thousands of free designs and fill your life with DIY joy!
This woodworking project was about 2×4 planter box plans. If you want to see more outdoor plans, we recommend you to check out the rest of my step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.