Deer Blind Plans 4×6

Ovidiu 6 GapDice RANDOM PLAN

This step by step diy project is about deer blind plans 4×6. If you need a new hunting shelter, you should check out my newest plans for a lean to 4×6 shack. The structure is really sturdy and it features windows on all four sides. Moreover, the access is really easy to the interior, as you have a nice door to the back wall. You can even get the job done with hand tools! Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.



Projects made from these plans




Deer Blind Plans 4×6




  • A – 2 pieces of 2×4 lumber – 72″ long, 5 pieces – 45″ long FLOOR FRAME
  • B – 1 piece of 3/4″ plywood – 48″x72″ long FLOOR
  • C – 2 pieces of 2×4 lumber – 41″ long, 2 pieces – 72″ long, 2 pieces – 38″ long, 2 pieces – 18 1/2″ long, 2 pieces – 36 1/2″ long FRONT WALL
  • D – 2 pieces of 2×4 lumber – 41″ long, 3 pieces – 72″ long, 2 pieces – 14″ long BACK WALL
  • E – 6 pieces of 2×4 lumber – 72″ long, 2 pieces – 65″ long, 4 pieces – 18 1/2″ long, 4 pieces – 36 1/2″ long 2xSIDE WALL

 One day



Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down



How to build a 4×6 deer stand



The first step of the project is to build the floor frame for the deer blind. Cut the joists from 2×4 or 2×6 lumber. Take accurate measurements and the align the joists with great care. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Make sure the corners are square and align the edges flush.

Fitting the floor

Fitting the floor

Fit the 3/4″ plywood to the floor frame and align the edges flush. Drill pilot holes and insert 1 5/8″ screws through the floor into the joists.



Build the side walls from 2×4 lumber and 3 1/2″ screws. Cut all the components at the right dimensions and then lay them on a level surface. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 16″ on center and make sure the corners are square. As you can easily notice in the diagram, you need to frame the window opening.



Frame the front wall for the deer blind from 2×4 lumber. Cut the components at the dimensions shown in the diagram and then assemble them together with 3 1/2″ screws.



Frame the back wall frame for the deer blind from 2×4 lumber, as well.

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the hunting stand. Align the edges flush and then drill pilot holes through the bottom plates. Insert 3 1/2″ screws to secure the walls into place tightly. Use a spirit level to plumb the wall frames vertically. Next, you need to lock the adjacent walls together tightly with screws.

Hunting stand plans

Hunting stand plans

Make sure you check out PART 2 of the project, so you learn how to build the roof for the hunting blind and how to fit the door and the blinds.

Deer stand plans 4x6

Deer stand plans 4×6

Remember that you need to apply a few coats of protective paint to the shelter, so you both make it low key and protect the components from decay. Furthermore, you can make adjustments to the shack so it suits your needs.


Get PDF Plans


This woodworking project was about deer blind plans 4×6 free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.




Shed      Furniture      Animals      Kids      Garden      Indoor


  1. Bob at - Reply

    How do I get the free plans for the 4×6 deer blind sent to my email? I’ve also tried to download the plans but have been unsuccessful at that also!

  2. Brett at - Reply

    Has anyone try to crossbow hunt out of this 4×6 box blind?

  3. tony at - Reply

    how much would this price out to be

  4. Johnj Hall at - Reply

    Would prefer windows open to the inside ?



  5. Levi at - Reply

    So i built this plan, and it seems really sturdy and heavy. Have you ever put this on a raised platform? I was going to put it about 6-8 ft high, but am concerned about the weight?

Click here to cancel reply.

error: Content is protected !!