Home Furniture Fish Tank Stand Plans

Fish Tank Stand Plans

by Ovidiu

 

This step by step woodworking project is about fish tank stand plans. This article features detailed instructions for building a beautiful fish tank stand. The best part of this project is that you can build the wooden aquarium stand in just a weekend.  We have designed the plans to keep the expenditures under control and to involve the least amount of work possible. The fish tank stand has a storage compartment and two front doors that enhance the look of the piece.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the tank stand won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Fish Tank Stand Plans

Building a fish tank stand

Building a fish tank stand

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 30 1/2″ long, 3 pieces – 9 1/4″ long FRAME
  • B – 4 pieces of 2×2 lumber – 26″ long LEGS
  • C – 2 pieces of 1×2 lumber – 9 1/4″ long, 2 pieces of 3/4″ plywood – 9 1/4″x26″ long 2xSIDE
  • D – 2 pieces of 1×2 lumber – 27 1/2″ long, 1 piece of 3/4″ plywood – 26″x27 1/2″ long FRONT FACE
  • E – 2 pieces of 2×2 lumber – 27 1/2″ long SUPPORTS
  • F – 1 piece of 3/4″ plywood – 9 1/4″x27 1/2″ long, 3 pieces of 1×2 lumber – 9 1/4″ long BOTTOM
  • G – 1 pieces of 3/4″ plywood – 12 1/4″x30 1/2″ long TOP
  • H – 2 pieces of 1×6 lumber – 12 1/4″ long, 2 pieces – 32″ long TRIMS
  • I – 1 piece of 3/4″ plywood – 13 1/2″x22 3/4″ long, 2 pieces of 1×2 lumber – 13 1/2″ long, 2 pieces – 22 3/4″ long 2xDOOR

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a fish tank stand

Building the top frame

Building the top frame

The first step of the project is to build the frame for the tabletop. As you can easily can notice in the diagram, use 2×4 lumber for the components. Cut the components at the right dimensions and drill pocket holes at both ends of the short components. Make sure the corners are square and insert 2 1/2″ screws to lock them together tightly.

Building the sides panels

Building the sides panels

Build the side panels out of 3/4″ plywood. Attach the 1×2 cleats to the top and bottom of the panel, as described in the diagram. Add glue to the joints and insert 1 1/4″ finishing nails to get the job done in a professional manner.

Attaching the corner legs

Attaching the corner legs

Drill pocket holes along the sides and top edges of the plywood panels and secure them to the 2×2 legs using 1 1/4″ screws. Add glue to the joints and leave no gaps between the components.

Attaching the front face

Attaching the front face

Build the front panel out of 3/4″ plywood and the supports out of 1×2 lumber. Use glue and 1 1/4″ brad nails to lock the supports to the panel. Drill pocket holes along the sides and top edges. Fit the front panel to the side panels and insert 1 1/4″ screws to lock them together tightly. Make sure the corners are square before inserting the screws.

Fitting the frame supports

Fitting the frame supports

Continue the project by fitting the 2×2 supports to the face of the fish tank stand. Drill pocket holes at both ends of the supports and secure them to the sides using 2 1/2″ screws. Make sure the corners are right-angled.

Fitting the top frame

Fitting the top frame

Continue the woodworking project by attaching the frame to the top of the structure. Align the edges with attention, making sure they are perfectly flush. Insert 2 1/2″ screws through the top of the stand into the 2×4 frame. Leave no gaps between the components and add glue to enhance the rigidity of the structure.

Fitting the top

Fitting the top

Use 3/4″ plywood to build the top of the aquarium stand. Smooth the edges with sandpaper and attach it to the frame using glue and 1 1/4″ brad nails.

Fitting the top trims

Fitting the top trims

Use 1×6 lumber to build the trims for the top of the stand. Attach the trims to the frame of the stand using 1 1/4″ brad nails and glue. Make sure the corners are square and leave no gaps between the components.

Fitting the cleats

Fitting the cleats

Build the cleats out of 1×2 lumber. Drill pocket holes at both ends of the components and secure them to the structure using 1 1/4″ screws. Check if the corners are right-angled before inserting the screws.

Attaching the bottom

Attaching the bottom

Build the bottom of the stand out of 3/4″ plywood. Smooth the edges with 120-grit sandpaper and fit the sheet to the bottom cleats. Insert a few 1 1/4″ brad nails to lock the sheet to the cleats.

Building the doors

Building the doors

Build the doors panels out of 3/4″ plywood and the frames out of 1×2 lumber. Cut the components at the right dimensions and secure them to the plywood panels using 1 1/4″ brad nails and glue. Leave no gaps between the components and make sure the edges are perfectly flush.

Fitting the doors

Fitting the doors

Fit the doors to the opening and secure them to the side using hinges. Leave 1/8″ around the doors and install a magnet door stop. Fit nice handles and then take care of the finishing details.

Fish Tank Stand Plans MOP

Fish Tank Stand Plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the project and to protect the wooden aquarium stand from decay, we recommend you to cover the components with paint or stain.

 

 

This woodworking project was about fish tank stand plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

4 comments

Kirsten -

Could this hold a 30 gallon tank?

Reply
Ovidiu -

You need to measure the base of tank and see if it fits the stand.

Reply
Michael -

Hi Ovidiu, i’m using this plan to build a tank stand that is 5″ longer and 5″ wider. My question is should I add the 5 inches to the height as well or it doesn’t matter. Thanks in advance!

Reply
Ovidiu -

No, it doesn’t matter, unless you also want to make it taller.

Reply

Leave a Reply to Kirsten Cancel Reply