This step by step woodworking project is about adirondack loveseat plans. This article features detailed instructions and diagrams about building a wonderful adirondack bench, that will add character to any backyard. If you know the basic woodworking skills and have basic household tools, you can get build a simple but beautiful adirondack loveseat in just one day.
You need to sand the edges of the components with a sand block, or round them with a router and a 1/4” bit. Moreover, we recommend you to align all the components at both ends before driving in the screws. Work with great care and with attention, making sure all the slats are placed equally spaced. Invest in high quality lumber, such as pine, cedar or redwood, as the chair will be exposed to rain.
Projects made from these plans
Adirondack Loveseat Plans
- A – 2 pieces of 1×8 lumber – 33” long, 1 piece – 46 1/2″ long LEGS
- B – 2 pieces of 1×4 lumber – 20 3/4” long FRONT LEGS
- C – 5 pieces of 1×4 lumber – 46 1/2” long, 1 piece of 1×3 lumber – 19″ long SEAT
- D – 2 pieces of 1×4 lumber – 23 1/4” long SUPPORTS
- E – 2 pieces of 1×3 lumber – 45” long, 1 piece of 2×2 lumber – 48″ long SUPPORTS
- F – 11 pieces of 1×4 lumber – 34” long BACKREST
- G – 2 pieces of 1×4 lumber – 24 1/2” long, 2 pieces – 1 1/4″ long ARMRESTS
Building an adirondack bench
The first step of the woodworking project is to build the legs for the adirondack chair. As you can easily notice in the diagram, we recommend you to mark the cut lines on the 1×8 slats, using a carpentry pencil.
It is essential to take accurate measurements and to double check the marks. Next, get the job done using a circular saw and a piece of sandpaper. Smooth the edges and remove the residues.
The next step of the woodworking project is to attach the front support to the side legs, as described in the diagram. In order to get the job done in a professional manner, we recommend you to create rigid joints.
Drill pocket holes at the end of the side legs and insert 1 1/4″ screws into the front support. Alternatively, you could drill pilot holes along the side edges of the front component and insert 1 1/4″ screws into the legs. Add glue to the joints to create a rigid structure.
Cut the legs for the adirondack bench at the right size, by using a circular saw. Drill pilot holes through the legs and secure them to the frame of the chair using 1 1/4″ screws. Plumb the legs with a spirit level and add glue to the joints. Leave no gaps between the components and add glue to enhance the bond.
Building the seat for the adirondack bench is a straight-forward process, as you need to cut the 1×4 slats at 46 1/2″ and to smooth the cut edges with fine-grit sandpaper. Drill pilot holes through the slats and place them equally-spaced.
Afterwards, secure the slats to the frame by suing 1 1/4″ screws and waterproof glue. Make sure you countersink the head of the screws, in order to get a professional look.
Continue the project by assembling the backrest for the adirondack bench. As you can easily notice in the plans, you should lay the 1×4 slats on a level surface, making sure you place them equally-spaced.
Attach the cleats to the back of the backrest, drill pilot holes and insert 1 1/4″ screws into the slats. In addition, make sure you cut the top of the backrest as described in the diagram, in order to enhance the look of the bench. Leave about 5/8″ between the slats, if you want to get consistent gaps.
Build the armrest supports out of 1×4 lumber and attach them to the frame of the adirondack love seat, as described in the diagram. Drill pilot holes through the components and secure them to the legs using 1 1/4″ screws. Use a spirit level to make sure the supports are perfectly horizontal.
Fit the backrest to the frame of the adirondack bench, making sure you leave no gaps between the components. Attach the 2×2 support to the backrest and drill pilot holes through the armrests supports.
Next, insert 2″ screws through the supports into the 2×2 component. In addition, drill pocket holes at both ends of the bottom support and secure it to the side legs using 1 1/4″ screws. Add glue to create rigid joints.
In order to get a professional result, we recommend you to cut the armrests to the right size and shape. Use a circular saw to get the job done and smooth the edges with sandpaper. Drill pilot holes through the armrests and secure them to the supports by inserting several 1 1/4″ screws. Leave no gaps between the components and add glue.
If you really want to build an adirondack loveseat with a neat appearance, we recommend you to attach decorative trims to the bottom of the armrests. Drill pilot holes and secure the trims to the supports, by inserting finishing nails.
In order to add support to the seat of the adirondack bench, we recommend you to install a 1×3 support to the frame. Mark the cut lines on the slat and get the job done with a saw.
Drill pocket holes at both ends of the support and lock it to the frame of the seat using 1 1/4″ screws. Make sure you center the support into place with attention before inserting the screws.
Last but not least, we recommend you to take care of the finishing touches. Therefore, fill the holes with a wood filler and let the compound to dry out for about several hours. Afterwards, sand the wooden surface along the wood grain, using 120-grit sandpaper.
Top Tip: Vacuum the residues thoroughly, before covering the wooden surface with several coats of stain. Make sure you apply the products in a properly-ventilated location.
This woodworking project was about adirondack loveseat plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result. Don’t forget to LIKE our facebook page and to follow us on G+ to be the first that gets out latest tutorials.