This step by step diy woodworking project is about 10′ picnic table plans. If you want to learn more about building a long picnic table, we recommend you to take a look over the instructions described in the article. A sturdy 10 feet picnic table is a great addition to any backyard, as it will gather all the loved ones to take a nice meal in nature. Check my other 10′ picnic table design here.
Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from. Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting.
Projects made from these plans
10′ Picnic table plans
- A – 6 pieces of 2×4 lumber – 40″ long LEGS
- B – 6 pieces of 2×4 lumber – 70″ long SEAT SUPPORTS
- C – 6 piece of 2×4 lumber – 29″ long TABLETOP SUPPORTS
- D – 6 pieces of 2×6 lumber – 120″ long TABLETOP
- E – 4 pieces of 2×6 lumber – 120″ long SEAT
- F – 2 pieces of 2×4 lumber – 54″ long BRACES
How to build a long picnic table
The first step of the project is to build the legs for the picnic table. Use 2×4 lumber to build the legs. Use a miter saw to cut both ends of the legs at 60 degrees. Smooth the edges with fine-grit sandpaper and remove the residues with a damp cloth.
If you find this design atypical, you should check out my other 10′ picnic table plans HERE.
Build the tabletop supports out of 2×4 lumber, as shown in the diagram. Cut both ends of the supports in a decorative manner using a circular saw. Clamp the braces to the legs, making sure the edges are all aligned. Drill pilot holes through the legs and through the braces, before inserting the 5″ carriage bolts.
Build the seat supports out of 2×4 lumber. Cut the components at the right size and use a saw to make both ends decorative. Clamp the supports to the legs, after aligning everything with great care. Drill pilot holes through the supports and through the legs, before inserting the 5″ carriage bolts.
After building the sides for the picnic table, we recommend you to secure them to the tabletop. Lay the slats on a level surface, making sure they are equally-spaced. Fit the sides to the slats, drill pilot holes through the supports and insert 2 1/2″ screws to lock them together tightly. Plumb the sides with a spirit level, to prevent the wood from splitting.
In order to enhance the rigidity of the long picnic table, we recommend you to fit diagonal braces. Cut both ends of the braces at 69.2 degrees.
Drill pilot holes at both ends of the braces and secure them to the tabletop supports using 2 1/2″ screws. Make sure the legs are plumb before inserting the screws, to get a professional result.
After fitting the diagonal braces, you need to get the job done by attaching the seat slats to the 10 feet long picnic table. Center the slats to the frame and secure them to the supports using 2 1/2″ screws. Pre-drill the components before inserting the screws, to prevent the wood from splitting.
One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
Top Tip: If you want to enhance the look of the project and to protect the stand from decay, we recommend you to cover the components with paint or stain. See my newer picnic table plans HERE.
This woodworking project was about 10′ picnic table plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.