12×24 Lean to Carport Roof Plans

This step by step diy project is about 12×24 carport gable roof plans. This is PART 2 of the large lean to carport project, where I show you how to build the roof and how to attach the decorative trims. This carport is ideal if you want to save space in your yard or place it near the property line. You can even easily modify my plans and turn it into an attached carport. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

12×24 Lean to Carport Roof Plans

Building-a-12×24-carport

Cut & Shopping Lists

• D – 19 pieces of 2×6 lumber – 168″ long RAFTERS
• E – 8 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x48″ long, 2 pieces – 24″x96″ long, 2 pieces – 24″x48″ long ROOF SHEETS
• F – 2 pieces of 1×8 lumber – 288″ long, 2 pieces – 168 1/2″ long TRIMS
• G – 350 sq ft of tar paper, 350 sq ft of asphalt shingles ROOFING

• 19 pieces of 2×6 lumber – 14′
• 11 pieces of 3/4″ plywood – 4’x8′
• 2 pieces of 1×8 lumber – 24′
• 2 pieces of 1×8 lumber – 16′
• rafter ties
• 1 5/8″ screws
• 350 sq fr of tar paper, 350 sq ft of asphalt shingles
• 2″ brad nails
• wood glue, stain/paint
• wood filler

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Concrete mixer, Post hole digger

 Safety Gloves, Safety Glasses

Time

 One weekend

Related

• Flat roof carport plans
• Lean to carport plans

How to build a 12×24 lean to carport roof

Building-the-rafters

The first step of the project is to build the rafters for the single car carport. Therefore, you should use 2×6 lumber. Mark the cut lines on the beams and then get the job done with a saw. Smooth the edges with sandpaper for a professional result.

Fitting-the-rafters

Fit the rafters to the top of the single car carport, making sure you place them every 16″ on center. Use a spirit level to plumb the trusses and lock them to the support beams with rafter ties.

Fitting-the-roof-sheets—carport

Attach 3/4″ plywood sheets to the top of the carport. Start with the bottom left section of the carport and go up to the top. Leave no gaps between the sheets and secure them into place with 1 5/8″ screws or nails. Ideally, you should use tongue and groove roof sheets.

Fitting the roof trims

Fit 1×8 trims to the sides of the carport, so you cover the ends of the rafters. Use 2″ brad nails to secure the trims into place. Align the edges with attention for a professional result.

Fitting the roofing

Install the roofing felt, starting from the bottom left of the roof. Secure the paper to the roofing, using a stapler. Make sure the tar paper overlaps at least 2”. Don’t forget to cover the top ridge with a 14” strip of paper. Start the first course of shingles with a full tab, the second with 2 1/2 tabs, the third with 2 tabs, the forth with 1 1/2 tabs, the fifth with 1 tab, the sixth with half tab and the seventh with a 3 tabs.

12×24 Do It Yourself Lean to Carport Plans – Front view

Last but not least, fill the holes with wood putty and let it dry out for a few hours. Sand the whole surface with sandpaper and then apply a few coats of paint or stain to enhance the look of the carport and to protect the components from decay.

12×24 Do It Yourself Lean to Carport Plans

This project can be built in less than one week and it will serve you for many, many years in a row. This large carport is easy to build and fairly budget friendly. I recommend you to read the local building codes before starting the project, so you make sure you comply with the local building codes. Check out PART 1 of the project.

This woodworking project was about 12×24 carport lean to roof plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

EXPLORE MORE IDEAS FOR: