Glider Bench Plans

This step by step diy project is about glider bench plans. I have designed this simple glider bench with a stand, so you can relax in your backyard while taking in a breath of fresh air. Make sure you invest in weather resistant lumber, such as cedar or redwood, for a professional result and durability. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. Premium Plans for this project available in the Shop.

Projects made from these plans

How to build a glider bench

DIY Glider Bench

How to build a glider swing

How to build a glider bench

DIY Glider Swing

  

It’s that simple to build a porch swing!

Glider Bench Plans

Building-a-glider-bench

Cut & Shopping Lists

• A – 2 pieces of 2×4 lumber – 15″ long, 2 pieces – 21 1/4″ long, 2 pieces – 22″ long LEGS
• B – 2 pieces of 2×4 lumber – 11 1/2″ long, 2 pieces – 12 3/4″ long SUPPORT 
• C – 2 pieces of 2×4 lumber – 57″ long, 4 pieces – 15 1/2″ long SEAT FRAME
• D – 5 pieces of 1×4 lumber – 57″ long SEAT
• E – 3 pieces of 2×3 lumber – 10 1/2″ long, 18 pieces of 2×2 lumber – 10 1/2″ long, 2 pieces of 2×4 lumber – 57″ long BACKREST

• 2 pieces of 2×4 lumber – 8′
• 5 pieces of 2×4 lumber – 6′
• 5 pieces of 1×4 lumber – 6′
• 1 piece of 2×3 lumber – 4′
• 2 pieces of 2×2 lumber – 8′
• glider brackets
• 2 1/2″ screws
• 2 1/2″ screws
• 1 5/8″ screws
• 2″ nail
• wood filler , wood glue, stain/paint

Tools

 Kreg Jig

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: Glider Bench Plans
• PART 2: Glider Stand Plans

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

How to build a glider bench

Assembling-the-back-legs

The first step of the project is to build the back legs for the glider bench. As you can easily notice in the diagram, you need to cut the components from 2×4 lumber. Use a miter saw to make the angle cuts. Lay the components on a level surface and then lock them together with screws and glue. Align the edges with attention.

Assembling-the-sides-for-the-bench

Cut the front legs and the horizontal supports from 2×4 lumber. Drill pocket holes at both ends of the horizontal supports. Align the edges with attention and use 2 1/2″ screws to lock them together tightly.

Seat-frame

Use 2×4 lumber for the seat frame. Cut the components at the right dimensions. Align the edges with attention, drill pilot holes and assemble the frame together tightly with 2 1/2″ screws. Make sure the corners are square and align the edges flush.

Assembling the frame of the bench

Attach the sides to the seat frame. Align the edges with attention, making sure the corners are square. Drill pilot holes through the frame and insert 2 1/2″ screws into the legs.

Seat slats

Fit 1×4 slats to the seat frame. Align the edges with attention and place a piece of 1/4″ plywood between the slats, to create even gaps. Drill pilot holes through the slats and insert 1 5/8″ screws into the seat frame.

Fitting the supports

Use 2×4 lumber for the top and bottom backrest supports. Drill pocket holes at both ends and then secure them to the back legs with 2 1/2″ screws.

Fitting the backrest slats

Use 2×2 and 2×3 for the backrest slats. Drill pocket holes at both ends and then use 2 1/2″ screws to lock them into place tightly. Use 1 piece of 1 1/4″ wood to create even gaps.

Glider Bench Plans – Free Plans

Make sure you check out PART 2 of the project, so you learn how to build the stand for the glider bench. Moreover, you should also check out my other glider swing design HERE.

Wood Glider Bench Plans

You can easily make adjustments to my plans to suit your needs and tastes. Moreover, you can adjust the height of the legs. See all my outdoor furniture projects HERE. Premium Plans for this project available in the Shop.

If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

This woodworking project was about glider bench plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -