Â
This step by step diy project is about 8×14 shed doors and trims plans. This is PART 3 of the large garden shed project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. The double doors will allow and easy access to the interior of the shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in a few day. See all my Premium Plans HERE.
Â
Â
Projects made from these plans
Â
Â
8×20 Gable Shed Doors Plans
Â
Cut & Shopping Lists
- N – 2 pieces of 2×4 lumber – 85 1/2″ long, 1 piece – 79″ long JAMBS
- O – 2 pieces of 2×4 lumber – 76 1/4″ long, 2 pieces – 36″ long, 1 piece of T1-11 siding – 36″x83 1/4″ long 2xDOOR
- P – 2 pieces of 2×4 lumber – 85 1/2″ long, 1 piece – 103″ long JAMBS
- R – 1 piece of T1-11 siding – 83 1/4″ long, 2 pieces of 2×4 lumber – 76 1/4″ long, 2 pieces – 48″ long, 1 piece – 41″ long 2xDOOR
- Q – 4 pieces of 1×4 lumber – 92 1/4″ long, 4 pieces – 93 1/2″ long TRIMS
- 18 pieces of 2×4 lumber – 8′
- 1 piece of 2×4 lumber – 10′
- 8 pieces of 1×4 lumber – 8′
- 2 pieces of T1-11 siding – 4’x8′
- 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws, 1 1/4″ screws
- 6d nails
- hinges+latch
- wood filler , wood glue, stain/paint
Tools
 Hammer, Tape measure, Framing square, Level
 Miter saw, Drill machinery, Screwdriver, Sander
 Safety Gloves, Safety Glasses
Time
Related
- PART 1: 8×20 Shed PlansÂ
- PART 2: 8×20 Shed Roof Plans
- PART 3: 8×20 Shed Door Plans
Â
Â
Building 8×20 shed doors
Fit the 2×4 jambs around the front door opening. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws, every 8″ along the framing.
Build the door panels from T1-11 siding and the trims from 2×4 lumber. Use 1 5/8 screws to lock the panels to the trims. Add glue to the joints and align the edges flush. The door panels are the pieces you have cut out when installing the sheets to the front wall.
Fit the double doors to the side of the shed. Align the edges with attention and use hinges to lock them to the jambs. Make sure the doors open and close easily and then install the latch.
Fit the 2×4 jambs around the side door opening. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws to lock them into place tightly.
Build the door panels from T1-11 siding and the trims from 2×4 lumber. Use 1 5/8 screws to lock the panels to the trims. Add glue to the joints and align the edges flush. The door panels are the pieces you have cut out when installing the sheets to the front wall.
Fit the double doors into place and lock them to the jambs with hinges. Make sure the doors open and close easily and then use a latch to lock the doors into place tightly.
Fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 2″ nails to lock the trims into place tightly.
Fit the trims to the front of the shed and back, as well.
Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.
Â
Â
This woodworking project was about shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.
Â
Â
Â
1 comment
Really good info for the 8×20 shed. I want a place to store some things, not the least of which are my 16′ long kayaks. This will be perfect! Thank you