12×12 One Horse Barn Door Plans

This step by step diy project is about 12×12 one horse barn door plans. This is PART 3 of the project where I show you how to build the dutch doors and how to attach the decorative trims to the corners of the shed. Make sure you check the local codes and make adjustments to the plans, if required. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

Projects made from these plans

12×12 One Horse Barn Door Plans

Building-a-12×12-one-horse-barn-shed

Cut & Shopping Lists

• I – 2 pieces of 2×4 lumber – 96″ long, 1 piece – 55″ long JAMBS
• J – 1 piece of T1-11 siding – 48″x48″ long, 2 piece of 2×4 lumber – 48″ long, 2 pieces – 41″ long, 1 piece – 58″ long 2xDOOR
• K – 4 pieces of 1×4 lumber – 119 1/4″ long, 2 pieces – 95″ long, 2 pieces – 94 1/4″ long TRIMS

• 9 pieces of 2×4 lumber – 8′
• 1 piece of T1-11 siding – 4’x8′
• 4 pieces of 1×4 lumber – 10′
• 4 pieces of 1×4 lumber – 8′
• hinges + latch
• 6d nails, 2 1/2″ screws, 3 1/2″ screws
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

• PART 1: 12×12 One Horse Barn Shed Plans
• PART 2: 12×12 One Horse Barn Shed Roof Plans
• PART 2: 12×12 One Horse Barn Shed Doors Plans

How to build a 12×12 barn shed doors

Building-the-door-horse-barn

Build the door panels from T1-11 siding and the trims from 1×4 lumber. Use 1 1/4 screws to lock the panels to the trims. Add glue to the joints and align the edges flush.

Fitting-the-door-jambs

Fit the 2×4 jambs around the door opening. Align the edges with attention and insert 2 1/2″ screws to lock them tightly into place.

Fitting the doors

Fit the dutch door into the openings and lock them to the jambs with hinges. Install latches so you can secure the door into place tightly.

Side wall trims

Fit the 1×4 trims to the sides of the horse shed. Align the edges and insert 2″ nails to lock the trims into place tightly.

Back wall trims

Fit the 1×4 trims to the back of the shed. Align the edges and insert 2″ nails to lock them into place tightly.

Front trims

Fit the 1×4 trims to the front of the shed. Align the edges and insert 2″ nails to lock them into place tightly.

12×12 One horse Horse Shed Plans

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. Check out PART 1 and PART 2 of the shed project, so you learn how to build the frame of the shed and the roof.

This woodworking project was about 12×12 one horse barn door plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -