Free Wood Shed Plans

This step by step diy woodworking project is about free wood shed plans. This simple wood shed can store up to 3/4 cords of wood and is easy to build. You can adjust the size, shape and the design of the project to suit your needs. The feature a 30 degree sloped roof for easy access. Make sure you take a look over the rest of plans to see alternatives and more projects for your garden.

Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue to the joints, in order to enhance the rigidity of the structure. See all my Premium Plans HERE.

Projects made from these plans

DIY Firewood shed

DIY Wood Shed

DIY Woodshed

DIY Stylish Wood Shed

DIY Outdoor Wood Shed

DIY Small Firewood Shed

DIY Small Firewood Shed

Decorative Firewood Shed

  

Free Wood Shed Plans

Building-a-wood-shed

Cut & Shopping Lists

• A – 2 piece of 2×4 lumber – 90″ long, 7 pieces – 18″ long FRAME
• A – 5 pieces of 2×4 lumber – 90″ long DECKING
• B – 2 pieces of 2×4 lumber – 64 1/4″ long, 2 pieces – 62″ long, 2 pieces – 51 3/4″ long, 2 pieces – 51 1/4″ long LEGS
• C – 2 pieces of 2×6 lumber – 96″ long BEAMS
• D – 7 pieces of 2×4 lumber – 29 3/4″ long RAFTERS
• E – 14 pieces of 1×4 lumber – 24 3/4″ long, 7 pieces – 93″ long SIDE SLATS
• F – 1 piece of 3/4″ plywood – 30 3/4″x96″ long ROOF
• G – 20 sq ft of tar paper, 20 sq ft of asphalt shingles ROOFING

• 17 piece of 2×4 lumber – 8′
• 2 pieces of 2×6 lumber – 8′
• 12 pieces of 1×4 lumber – 8′
• 1 piece of 3/4″ plywood – 4’x8′
• 20 sq ft of tar paper, 20 sq ft of asphalt shingles
• 100 pieces of 2 1/2″ screws
• 100 pieces of 1 1/4″ screws
• 25 pieces of 3″ lag bolts

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Post hole digger, Concrete mixer

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Firewood shed plans
• Large wood shed plans

Building a narrow wood shed

Building-the-floor-frame

The first step of the project is to build the frame for the wood shed. Cut the components from 2×4 lumber at the right dimensions. Drill pilot holes through the long joists and insert 2 1/2″ screws into the 2 1/2″ screws. Make sure the corners are right-angled and align everything with attention.

Fitting the decking slats

Attach 2×4 slats to the frame, as shown in the diagram. Place the slats equally-spaced, drill pilot holes and insert 2 1/2″ screws.

Attaching-the-posts-to-the-floor

Attach the 2×4 slats to the front and to the back of the shed. Drill pilot holes and insert 3″ lag bolts. Use a spirit level to plumb the legs.

Fitting the side legs

Next, attach the side legs to the frame, as shown in the diagram. Drill pilot holes and insert the lag screws. Drill pilot holes through the front legs and insert 2 1/2″ screws into the side legs.

Fitting the top beams

Attach the 2×6 beams to the front and to the back of the shed. Drill pilot holes through the beams and insert 2 1/2″ screws into the legs. Use a spirit level to check if the beams are horizontal.

Building-the-rafters

Build the rafters from 2×4 lumber. Cut both ends of the rafters at 60 degrees. Smooth the edges with sandpaper.

Fitting the roof rafters

Fit the rafters to the top of the shed, as shown in the diagram. Place the rafters equally-spaced and drill pilot holes through the beams. Insert 2 1/2″ screws to lock the rafters into place. Two screws for each joint will add support to the structure.

Fitting the roofing sheet

Build the roof from 3/4″ plywood. Align the edges with attention and lock it into place with 1 5/8″ screws. Leave no gaps between the components.

Fitting the roofing

Staple tar paper to the roof and then install asphalt shingles. Install the asphalt shingles one by one, from the bottom of the roof to the top. Secure the shingles into place using a nail gun and 1/2” screws.

Top Top: Snap a chalk line to guide you when installing the next rows. In addition, make sure the shingles overhang the edges of the roof at least 1/2”, to drain the water properly.

Fitting the back slats

Attach 1×4 slats to the back of the shed, as shown in the diagram. Place the slats equally spaced for a symmetrical result. You can use a 2″ block of wood to create even gaps between the slats.

Fitting the side slats

Fit 1×4 slats to the sides of the firewood shed. Place the slats equally-spaced for a professional result. Drill pilot holes and insert 1 5/8″ screws to lock the slats into place.

DIY Wood Shed

This small firewood shed can store up to 3/4″ cords of wood, making it ideal for your backyard, if you have an outdoor barbeque or a fire pit. Storing the wood will dry them and protect them from the elements.

Free wood shed plans

Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-200 grit sandpaper and remove the residues with a damp cloth.

Top Tip: Apply a few coats of paint or stain to the components, to enhance the look of the project.

This woodworking project was about free wood shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

EXPLORE MORE IDEAS FOR: