Home Shed Free 12×16 Shed Roof Plans

Free 12×16 Shed Roof Plans

by Ovidiu

 

This step by step diy project is about 12×16 shed roof plans. This is PART 2 of the 12×16 storage shed, where I show you how to build the gable roof. Make sure you check out the first and third part of the project, so you learn how to build the frame of the shed and how to build the double front doors. You can easily adjust the design of this shed and add more doors of windows, to suit your needs. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Free 12×16 Shed Roof Plans

Building-a-12x16-shed

Building-a-12×16-shed

 

Cut & Shopping Lists

  • E – 2 pieces of T1-11 siding – 29 3/4″x48 long, 1 piece – 43 1/2″x48″ long 2xGABLE END
  • F – 2 pieces of 2×4 lumber – 96″ long, 1 piece – 137″ long, 2 pieces – 23 1/2″ long, 1 piece – 36″ long 9xTRUSS
  • G – 8 pieces of 2×4 lumber – 96″long, 8 pieces – 34″ long 2xOVERHANG
  • H – 4 pieces of 3/4″ plywood – 10 3/4″x94″ long, 4 pieces – 48″x96″ long, 4 pieces – 46″x48″ long, 2 pieces – 46″x96″ long ROOF
  • K – 2 pieces of 1×6 lumber – 98″ long, 2 pieces – 213 1/2″ long TRIMS
  • L – 300 sq ft of tar paper, 300 sq ft of asphalt shingles ROOFING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building a 12×16 shed roof plans

Building-the-rafters

Building-the-rafters

The first step of the project is to build the rafters for the 12×16 shed roof. Mark the cut lines on the rafters and get the job done with a circular saw and with a chisel. Make sure you smooth the recesses for a neat result. In addition cut both ends of the rafters at 60 degrees, by making 30 degree cuts.

Attaching the bottom truss

Attaching the bottom truss

Next, you need to attach the bottom rafters to assemble the truss. In order to speed up the process, I recommend you to lay them on a level surface and to make a jig, so you align everything properly and easily. Cut both ends of the 2×4 bottom rafters at 30 degrees, by making 60 degree cuts with a miter saw.

Fitting the trusses supports

Fitting the trusses supports

Next, fit the supports to the trusses, so you add more strength to the structures. Align everything with attention, so the corners are right-angled.

Assembling the trusses

Assembling the trusses

Use 1/2″ plywood for the gussets. Attach the gussets to the joints and lock them into place with 1 1/2″ screws. Attach construction glue to the joints for a professional result.

Fitting-the-trusses

Fitting-the-trusses

Fit the trusses to the top plates of the garden shed, spacing them every 24″ on center. Use a spirit level to plumb the trusses and secure them to the top plates of the walls with nails.

Fitting the roof blockings

Fitting the roof blockings

Fit 2x3s between the trusses, to seal the roof. Toenail the blockings to the top plates with nails.

Fitting the gable ends

Fitting the gable ends

Attach the T1-11 siding panels to the gable ends. Align the edges with attention and secure them into place with 8d nails. Leave no gaps between the panels for a professional result.

Building the overhangs

Building the overhangs

In order to create nice overhangs for the front and back faces of the storage shed, I recommend you to build the rafters. Mark the cut lines on the 2×4 beams and get the job done with a circular saw. Clean the recesses with a chisel and smooth them with sandpaper.

Fitting the overhangs

Fitting the overhangs

Fit the rafters to the front and back of the shed, as shown in the diagram. Use 2×4 supports to connect the overhang rafters to the roof of the shed. Drill pilot holes through the supports and insert 2 1/2″ screws into the rafters.

Fitting the roofing sheets

Fitting the roofing sheets

Attach 3/4″ plywood sheets to the roof structure of the 12×16 shed. Cut the sheets at the dimensions shown in the diagram and secure them into place with 1 5/8″ screws, every 8″ along the rafters. Leave no gaps between the sheets and align the edges flush.

Building the trims

Building the trims

Build the front trims for the roof from 1×6 lumber. Cut both ends at 60 degrees, by making 30 degree cuts.

Fitting the trims

Fitting the trims

Attach the trims to the front and back overhangs and secure them into place with 1 5/8″ brad nails. In addition, fit the side trims to the 12×16 shed. Leave no gaps between the components for a professional result.

Fitting the roofing

Fitting the roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a 12″ piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

How to build a 12x16 shed

How to build a 12×16 shed

Make sure you check out the rest of the project, so you learn how to frame the 12×16 garden shed and how to build the double doors. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project.

 

 

 

This woodworking project was about 12×16 shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

11 comments

Steve Cupp -

So there are two materials lists. One for the shed and one for the roof?

Reply
Ovidiu -

Yes. Each PART comes with its list.

Reply
jonathan -

I would like to build common rafters for this shed…..something where my rafter ties are as high as possible for more ceiling height….what is the roof pitch you have for this, and is there anything i need to keep in mind? (location of ties, ridge beam needed?ect) thanks

Reply
Paul -

Hello, great plans, thanks for sharing. Do you have this plan with a window by chance on the long side? Also, is there one complete lists for this shed complete? Cheers,

Reply
Ovidiu -

I have plans for your requirements on the Shop (full cut and shopping list for the whole project, cut layout diagrams, side window): https://gum.co/oJNkD

Reply
carl -

Nice looking plans but why bother if they cant be printed,. Waste my time, bad news travels fasst.

Goodbye,

Carl

Reply
Ovidiu -

You can print them. Please read the FAQs: https://myoutdoorplans.com/faq/

Reply
PEARLIE -

WOW Dude — seriously – guy does you a favour and you shit on him because YOU can’t operate a print button

Reply
Ovidiu -

Haha

Reply
Jay -

i am building a 12 x 16 gable shed from your plans. i am trying to build the trusses. i am using the plans for the trusses that use three supports. My question is you show a 137″ bottom rafter piece and a 4″ birdsmouth cutout. That adds up to 145″ for a width that should only be 144″. Is the extra inch to allow some room when installing the trusses.

Reply
Ovidiu -

the extra inch is for the side siding panels

Reply

Leave a Reply to Ovidiu Cancel Reply