Home 8x8 8×8 Lean to Shed Plans

8×8 Lean to Shed Plans

by Ovidiu

 

This step by step diy project is about 8×8 lean to shed shed plans. This square shed provides significant storage space and the front double doors will provide an easy access to the interior. The lean to roof has a mellow slope. Moreover, I have designed shed with many sizes so check them out, as well. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

8×8 Lean to Shed Roof Plans

Building-a-8x8-lean-to-shed

Building-a-8×8-lean-to-shed

 

Cut & Shopping Lists

  • A – 3 pieces of 4×4 lumber – 96″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 96″ long, 7 pieces – 93″long FLOOR
  • C – 2 pieces of 3/4″ plywood – 48″x96″ long FLOORING
  • D – 2 pieces of 2×4 lumber – 89″ long, 5 pieces – 74″ long 2xSIDE WALL
  • E – 2 pieces of 2×4 lumber – 96″ long, 7 pieces – 74″ long BACK WALL
  • F – 2 pieces of 2×4 lumber – 18″ long, 1 piece – 96″ long, 6 pieces – 89″ long, 2 pieces – 79 1/2″ long, 5 pieces – 4″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
  • G – 2 pieces of T1-11 – 48″x77 3/4″ long, 2 pieces – 48″x92 3/4″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

How to build a 8×8 lean to shed

Assembling-the-floor-frame

Assembling-the-floor-frame

First of all, you need to build the floor frame for the 8×8 shed. Cut the joists from 2×6 lumber. Lay the joists on a level surface and drill pilot holes through the rim joists. Place the joists every 16″ on center and then insert 3 1/2″ screws to lock them together tightly. Measure the diagonals and make adjustments till they are equal.

Fitting the skids

Fitting the skids

Choose the location for the 8×8 lean to shed. Level the surface and then compact a layer of gravel. Use 4×4 lumber for the skids. Align the edges flush and toenail the frame to the skids.

Attaching the floor sheets

Attaching the floor sheets

Use 3/4″ plywood for the shed floor. Fit the sheets to floor frame and then secure them into place. Align the edges flush, drill pilot holes and insert 1 5/8″ screws, every 8″ along the joists. Leave no gaps between the sheets for a professional result.

Building-the-side-walls

Building-the-side-walls

Build the side walls for the shed from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center, for a professional result. Align the edges flush and make sure the corners are square.

Building-the-back-wall-shed

Building-the-back-wall-shed

The next step of the project is to build the back wall of the shed. Cut the components from 2×4 lumber, after taking accurate measurements. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center, for a professional result. Make sure the corners are square and align the edges flush.

Building-the-front-wall

Building-the-front-wall

Frame the front wall using the information from the diagram. Cut the components from 2×4 lumber at the dimensions shown in the plans. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Use 2×6 lumber for the double header and fit 1/2″ plywood between the beams. Drill pilot holes and insert 2 1/2″ screws to assemble the double header.

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the shed. Align the edges flush and plumb the walls with attention. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Moreover, you need to lock the adjacent walls together tightly with screws.

Front wall - Siding

Front wall – Siding

Use T1-11 siding for the exterior walls of the shed. Make cuts to the sheets so you can fit them into place. Align the edges with attention and then insert 6-8d nails, so you can lock the sheets into place tightly.

Back wall siding

Back wall siding

Attach the siding to the back of the shed, in the same manner described above.

8x8 Lean to shed plans

8×8 Lean to shed plans

You need to take a look over PART 2 of the project, so you see how to frame the roof for the shed. The lean to shed roof will drain the water properly and the double doors will provide you an easy access to the interior.

8x8 Lean to shed plans - Front

8×8 Lean to shed plans – Front

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. Premium Plans for this project available in the Shop.

If you want to get PREMIUM PLANS for this project (different design with re-engineered structure), in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

 

 

This woodworking project was about 8×8 lean to shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

7 comments

Miz -

Heads up, the front wall double header should be cut at 75″, not the 63″ listed.

Reply
Jack -

Thank you for the feedback.

Reply
Bruce -

If the roof is 96″ wide before you tack on the 2×6’s, how is it 100 1/4 after? Wouldn’t the roof then be 99″ wide? 96″+1.5″+1.5″= 99″

Reply
Ovidiu -

How about the thickness of the siding sheets?

Reply
André Provost -

Hi,
I need this to buy plan:https://myoutdoorplans.com/shed/8×8-lean-to-shed-plans/
but I don’t find where. The only one I saw to buy is this one: https://myoutdoorplans.com/shed/8×8-lean-to-shed-plans/
But I want the door on the other higher side. Thanks!

Reply
Bill Weber -

I only see 4 pieces of T1-11 listed, for each side wall (2 each, 4 total) and the rear wall (2). That is 6 total not including the front wall and door. Yes?

Reply
Ovidiu -

There is also a PART 2 of the project, with its own shopping list.

Reply

Leave a Reply to Jack Cancel Reply