8×16 Gable Shed Plans

This step by step diy project is about 8×16 gable shed plans. I have designed this shed with a gable roof so you can store a lot of items. The access is very easy, as it features double doors on one side and a simple door on another side. In addition, this shed has a 36″x36″ window on one side, so you get plenty of light inside. This shed also features a nice loft, so you can enhance the storage space even more. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

 

8×16 Gable Shed Plans

Building-a-8×16-gable-shed

Cut & Shopping Lists

• A – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 93″ long FRAME
• B – 3 pieces of 4×4 lumber – 192″ long SKIDS
• C – 3 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x48″ long FLOOR
• D – 2 piece of 2×4 lumber – 8 1/2″ long, 4 piece – 81″ long, 1 piece – 96″ long, 1 piece – 89″ long, 2 pieces – 75 1/2″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
• E – 2 pieces of 2×4 lumber – 89″ long, 1 piece – 96″ long, 5 pieces – 81″ long SIDE WALL
• F – 2 pieces of 2×4 lumber – 192″ long, 1 piece – 185″ long, 11 pieces – 81″ long BACK WALL
• F – 2 pieces of 2×4 lumber – 192″ long, 1 piece – 185″ long, 12 pieces – 81″ long, 2 pieces – 36″ long, 3 pieces – 34″ long, 2 pieces – 75 1/2″ long, 6 pieces of 2×6 lumber – 39″ long FRONT WALL
• G – 12 pieces of T1-11 5/8″ siding – 48″x88″ long SIDING

• 3 pieces of 4×4 lumber – 16′
• 2 pieces of 2×6 lumber – 16′
• 13 pieces of 2×6 lumber – 8′
• 4 pieces of 3/4″ plywood – 48″x96″
• 6 pieces of 2×4 lumber – 16′
• 44 pieces of 2×4 lumber – 8′
• 5 pieces of 2×6 lumber – 8′
• 12 pieces of T1-11 5/8″ siding – 4’x8′
• metal tie for skids
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 4d nails, 16d nails
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 8×16 Gable Shed Plans 
• PART 2: 8×16 Gable Shed Plans
• PART 3: Double Shed Doors Plans

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

How to build a 8×16 gable shed

Assembling-the-floor-frame-8×16-shed

The first step of the project is to build the frame for the floor shed. Cut the components from 2×6 lumber at the dimensions described in the plans. Drill pilot holes through the rim jousts and then insert 3 1/2″ screws into the perpendicular joists. Align the edges flush and make sure the corners are square.

Fitting-the-skids

Use 4×4 lumber for the skids of the shed. Alternatively, you can even lay the shed on a concrete foundation, if you want a permanents construction. However, the easiest and the cheapest way to protect the floor of the shed from moisture is to use 4×4 skids. Use metal connectors to secure the skids to the joists.

Fitting-the-plywood-sheets

Attach the 3/4″ plywood sheets to the floor frame of the shed. Align the edges flush and insert 1 5/8″ screws into the floor, every 8″ along the joists.

Side-wall-frame

Start framing the walls for the shed using 2x4s and 3 1/2″ screws or 16d nails. Cut the plates and the studs at the right dimensions using a saw. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs, making sure you work on a level surface. Place the studs every 24″ on center.

Side-wall-with-double-doors-frame

Next, frame the wall with the double door. As you can easily notice in the diagram, you need to use 2×6 lumber for the double header. In addition, you can easily adjust the size of the door opening to suit your needs. Use the same techniques described above to frame the wall.

Back-wall-frame-plans

Frame the long plain wall from 2×4 lumber, as well. After cutting the components at the right dimensions, you need to lock them together with 3 1/2″ screws. Make sure the corners are square before inserting the screws.

Building-the-front-wall-frame

Continue the project by framing the long wall with the secondary door and with the 36″x36″ window. As you can easily notice in the plans, framing this wall is a little more complex, but following the diagram will make it easy enough for any builder. You can also adjust the size of the door and of the window to suit your needs.

Assembling-the-shed-frame

Lay the wall frames to the floor of the shed. Align the edges flush with the floor and use a spirit level to plumb the wall frames. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. In addition, lock the adjacent walls together with 3 1/2″ screws.

Siding-front-wall

The next step is to attach the 5/8″ T1-11 siding to the wall frames. As you can see in the plans, you need to make a few cut outs around the window and around the door opening. Align the edges flush and insert 6d or 8d nails to lock the panels into place tightly.

Siding-back-wall

Attach the T1-11 siding sheets to the rest of the shed walls.

Siding-wall-with-door

Make the cuts so the panels go around the double door opening. Do not throw away the panels, as you will be needing them when framing the double doors.

Siding-side-wall

Attach the siding panels to the opposite wall, as well.

8×16-gable-shed-plans

This 8×16 shed has a really neat appearance and it comes with a lot of storage space. The access is very easy to the interior of the shed, as it features large doors on two sides. Don’t forget to take a look over PART 2 and PART 3 to learn how to build the roof for the shed, as well as how to frame the double front doors.

If you want to download this project as a PDF file, with a single cut list and a single shopping list, check out the following GET PDF PLANS button.

This woodworking project was about 8×16 garden shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

EXPLORE MORE IDEAS FOR: