Home 6x8 6×8 Lean to Shed Plans

6×8 Lean to Shed Plans

by Ovidiu

 

This step by step diy project is about diy 6×8 lean to shed shed plans. I have designed this lean to shed so you can store all your garden tools and even a lawn mower. This shed has a lean to roof and double shed doors, so it features an easy access to the interior. Moreover, I have designed shed with many sizes so check them out, as well. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Previous
  Add-image

 

 

6×8 Lean to Shed Plans

Building-a-6x8-lean-to-shed

Building-a-6×8-lean-to-shed

 

Cut List

  • A – 2 pieces of 4×4 lumber – 96″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 96″ long, 7 pieces – 69″long FLOOR
  • C – 2 pieces of 3/4″ plywood – 48″x72″ long FLOORING
  • D – 2 pieces of 2×4 lumber – 18″ long, 1 piece – 96″ long, 6 pieces – 89″ long, 2 pieces – 79 1/2″ long, 5 pieces – 4″ long, 2 pieces of 2×6 lumber – 63″ long FRONT WALL
  • E – 2 pieces of 2×4 lumber – 65″ long, 4 pieces – 74″ long 2xSIDE WALL
  • F – 2 pieces of 2×4 lumber – 96″ long, 7 pieces – 74″ long BACK WALL
  • G – 1 piece of T1-11 – 48″x92 3/4″ long, 2 pieces – 48″x77 3/4″ long SIDING

Shopping List

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

One week

Related

 

 

How to build a 6×8 Lean to Shed

Floor-frame

Floor-frame

First of all, you need to build the floor frame for the shed. Cut the joists from 2×6 lumber. Lay the joists on a level surface and drill pilot holes through the rim joists. Place the joists every 16″ on center and then insert 3 1/2″ screws to lock them together tightly. Measure the diagonals and make adjustments till they are equal.

Fitting the skids

Fitting the skids

Choose the location for the 6×8 lean to shed. Level the surface and then compact a layer of gravel. Use 4×4 lumber for the skids. Align the edges flush and toenail the frame to the skids.

Fitting the floor

Fitting the floor

Use 3/4″ plywood for the shed floor. Cut the sheets to 4’x6′ and then secure them into place. Align the edges flush, drill pilot holes and insert 1 5/8″ screws, every 8″ along the joists. Leave no gaps between the sheets for a professional result.

 

Building shed wall framing

Side-wall-frame

Side-wall-frame

Build the side walls for the shed from 2×4 lumber. Cut all the studs and the plates at the right dimensions. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Align the edges flush and make sure the corners are square.

Front-wall-frame

Front-wall-frame

Frame the front wall for the shed. As you can see in the diagram, the double doors are 5′ wide. If you want, you can make adjustments so you can fit double 3′ doors. Use 2×6 lumber for the double header. Fit 1/2″ plywood between the double headers and secure them to the studs with nails. Place double studs, so you can enhance the rigidity of the wall frame.

Back-wall-frame

Back-wall-frame

Frame the back wall for the shed from 2×4 lumber. Cut the components at the right dimensions and then lay them on a level surface. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Place the studs every 24″ on center, for a professional result.

Place double studs to both ends of the wall. Fit 1/2″ plywood between the double studs.

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the shed. Align the edges with attention and plumb the walls with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor of the shed. Make sure the corners are square and lock the adjacent wall together with screws.

 

Fitting the siding sheets

Front wall - Siding

Front wall – Siding

Fit T1-11 siding sheets to the front of the shed. Make cuts to the panels and then lock them into place with 6-8d nails. Insert the nails every 8″ along the framing.

Back wall - Siding

Back wall – Siding

Attach 6-8d nails to the back of the wall. Align the edges flush and then insert the nails every 8″  along the framing.

 

Finishing touches

6x8 Lean to shed plans

6×8 Lean to shed plans

You need to take care of the rest of the project. Framing the lean to roof is a straight forward project, so check PART 2 to learn how to get the job done.

6x8 Lean to shed plans - Front view

6×8 Lean to shed plans – Front view

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. If you want to get this project as a PDF file with 1 full Cut list and 1 full Shopping list, please take a look over the GET PDF PLANS button bellow.

 

 

This woodworking project was about 6×8 lean to shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

6 comments

andrew -

Is there any way I can modify above plan for my 6×8 shed with door open on 6 feet side?
Thanks

Reply
Julian -

I super busy at the moment so I can’t help you with that. You need to make the modifications by yourself.

Reply
Lynn -

Anyone ever figure out how to modify these plans so door opens on the 6-foot side?

This shed be great for very narrow area back of the house but only if door’s on the 6’ side.

Reply
Robby -

Just frame out and add a header for a 36×80 door and jamb kit with trim and you’re golden. If need a wider door then build a custom door with a EasyHome gate kit. And frame to fit leaving a 1/4″ extra for the door to catch properly and add your own latch and handle or knob and catch plate
Same design and build just different measurements essentially.

Reply
Susie Noe -

Hi! I had to turn the shed so it would fit an area only 6 ft wide, so my finished shed is 6 wide x 8 long. Otherwise all dimensions the same now I can’t figure out how to do the rafters! Any way you could direct me? I figured out that the slope is a 3/12. Just can’t figure out how to cut the birds mouth

Reply
M3521 -

I made this shed and created a video summary.

https://www.youtube.com/watch?v=xkLLnmKalUM

The plans were great! I made a few minor modifications, but none of them requiremented for a successful build.

Reply

Leave a Reply to Susie Noe Cancel Reply