Home 6x10 6×10 Shed Plans

6×10 Shed Plans

by Ovidiu

 

This step by step diy project is about 6×10 shed plans. If you have a tight budget, but you still need more storage space in the backyard, this garden shed is the answer to your problems. The gable shed is sturdy, as the walls are made from 2x4s and it features a large front door for an easy access. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations. Premium Plans for this shed available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

6×10 Shed Plans

Building-a-6x10

Building-a-6×10

 

Cut & Shopping Lists

  • A – 3 pieces of 4×4 lumber – 120″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 120″ long, 9 pieces – 69″ long FRAME
  • C – 2 pieces of 3/4″ plywood – 48″x72″ long, 1 piece – 24″x48″ long, 1 piece – 24″x24″ long FLOOR
  • D – 2 pieces of 2×4 lumber – 65″ long, 1 piece – 72″ long, 4 pieces – 79 1/2″ long 2xSIDE WALL
  • E – 2 pieces of 2×4 lumber – 42″ long, 1 piece – 120″ long, 1 piece – 113″ long, 8 pieces – 79 1/2″ long, 2 pieces – 74″ long, 2 pieces – 39″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 120″ long, 1 piece – 1113″ long, 8 pieces – 79 1/2″ long BACK WALL
  • G – 6 pieces of T1-11 siding – 48″x86″ long, 4 pieces – 24″x86″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

It’s that easy to build a 6×10 shed!

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

How to build a 6×10 shed

Floor-frame-6x10

Floor-frame-6×10

First of all, you need to build the floor frame for the shed. Therefore, you have to cut all the joists from 2×6 lumber. Lay all the joists on a level surface and drill pilot holes through the rim beams. Insert 3 1/2″ screws through the rim joists into the perpendicular components. Make sure the corners are square and align the edges flush.

Fitting the skids

Fitting the skids

Select the right location for the shed and then level it properly. Compact a 2″ layer of gravel on the selected location and then fit the 4×4 skids. Use rafter ties to secure the joists to the skids.

Shed floor

Shed floor

Use 3/4″ plywood for the floor of the shed. Lay the sheets on the joists and then leave no gaps between the components. Drill pilot holes and insert 1 5/8″ screws every 8″ along the joists, so you can lock them into place tightly.

Back-wall-frame

Back-wall-frame

Build the back wall for the 6×10 shed frame from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center, for a professional result. Make sure the corners are square and align the edges flush.

Side-wall-frame

Side-wall-frame

Continue the project by assembling the side walls for the shed. Cut all the components from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs, as show in the diagram and make sure the corners are square. Then, attach the top double plate to the side walls.

Front-wall-frame

Front-wall-frame

Assemble the front wall frame from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws to lock everything together tightly. Frame the door for the shed using the information from the diagram. Use 2×6 lumber for the double header. Fit 1/2″ plywood between the beams and insert 2 1/2″ screws to assemble the double header together tightly.

Assembling the shed frame

Assembling the shed frame

Fit the four wall frames to the floor of the shed. Align the edges flush and then plumb them vertically with a spirit level. Plumb the wall frames vertically, drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Moreover, you need to lock the adjacent walls together tightly for a professional result.

Back wall - Siding

Back wall – Siding

Fit the T1-11 siding panels to the back wall of the shed. Use 6-8d nails to secure the panels to the framing tightly. Insert the nails every 8″ along the framing and leave no gaps between the panels.

Side wall - Siding

Side wall – Siding

Fit the T1-11 siding to the side walls of the storage shed, in the same manner described above.

Front wall - Siding

Front wall – Siding

For the front wall, you need to make a few cuts to the T1-11 siding panels, so you can lock them into place tightly. Use a circular saw to make the cuts and then align the edges flush.

6x10 Gable Shed Plans

6×10 Gable Shed Plans

This 6×10 shed is a good compromise if you need extra storage space, but you are not willing to invest a high amount of money into the construction materials. The gable roof is really straight forward to build, so check out PART 2 of the project. Premium Plans for this shed available in the Shop.

If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

 

 

This woodworking project was about 6×10 shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

7 comments

Mark V -

In regards to the 6×10 gable roof shed plans. The walls come out to 84″ however when the picture shows the T1-11 the diagram shows 86″. Where did the other 2″ come from?

Reply
Ovidiu -

They go over the floor joists. You can cut the panels to 84″, it doesn’t matter that much… just a matter of taste.

Reply
Joe -

How would I change this to get the door on one of the 6′ sides as opposed to the 10′ side?

Reply
Wrinagade -

I was curious if there is a way to consolidate materials list? I think I’m going to start this shed today. It will be used to house my pressure tank, pump and water treatment. Thanks!

Reply
Ovidiu -

That option is available for the Premium Plans. For the time being there is no Premium Plan for this project. So it’s left to you to aggregate the materials lists.

Reply
Wrinagade -

No problem! I started this weekend, so far, I have everything done, up to standing up the trusses. I will post pictures soon. I really appreciate this resource, Thank you!

Reply
Ovidiu -

That’s great. Looking forward to seeing and featuring your shed.

Reply

Leave a Reply to Ovidiu Cancel Reply