Home Shed 6′ Double Shed Doors Plans

6′ Double Shed Doors Plans

by Ovidiu

 

This step by step diy project is about 6′ double shed doors plans. This is PART 3 of the gable shed project, where I show you how to build the double front doors for the storage shed. Moreover, I show you how to fit the decorative trims to the shed, so you can add value. Make sure you read the local codes so you can comply with the legal requirements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Building shed doors

Building-a-10x10-gable-shed

Building-a-10×10-gable-shed

 

Cut & Shopping Lists

  • L – 2 piece of 2×4 lumber – 79 1/2″ long, 1 piece – 79″ long JAMBS
  • M – 2 pieces of T1-11 siding – 36″x79 1/2″ long, 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 72 1/2″ long, 1 piece – 29″ long, 2 pieces – 41″ long 2xDOOR
  • N – 4 pieces of 1×4 lumber – 88″ long, 4 pieces – 86 1/2″ long, 2 pieces – 18 1/2″ long, 3 pieces – 115 3/4″ long, 2 pieces – 114 1/4″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building shed doors

Building-the-shed-double-doors

Building-the-shed-double-doors

Build the door panels from T1-11 siding (the panel that you have cut out in the previous steps). Use 2×4 lumber for the trims. Align the edges flush and use 2″ brad nails to assemble the door.

Door jambs

Door jambs

Fit the 2×4 jambs around the double door opening. Fit the jams flush and insert 2 1/2″ screws to secure them into place tightly.

Fitting the double doors

Fitting the double doors

Fit the double doors to the opening and lock them to the jambs with hinges. Moreover, install a latch and handles, so you can open and close the doors easily.

Side wall - trims

Side wall – trims

Fit the 1×4 trims to the sides of the shed. Align the edges flush and then insert 2″ nails to lock them into place tightly.

Front trims

Front trims

Fit the 1×4 trims to the front of the shed. Cut the trims at the right size and hen lock them into place with 2″ nails. Fit the trims to the back of the shed, as well.

10x10 Gable Shed Plans

10×10 Gable Shed Plans

Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed. Moreover, I have lots of more shed plans, in terms of both sizes and shapes, HERE.

 

 

This woodworking project was about 6′ double shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

David Andrews -

Is there a complete material list for this 10×10

Reply
Ovidiu -

This shed project has 3 parts. Each part comes with a full material list.

Reply

Leave a Reply to Ovidiu Cancel Reply