Home 16x24 16×24 Gambrel Shed Plans

16×24 Gambrel Shed Plans

by Ovidiu

 

This step by step diy project is about 16×24 gambrel shed plans. I have designed this 16×24 barn storage shed, so you can finally have that workshop you have always dreamed about. In addition, you have a super easy access to the shed, due to the double doors. Make adjustments to the plans so the shed suits your needs. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

16×24 Gambrel Shed Plans

Building-a-16x24-barn-shed

Building-a-16×24-barn-shed

 

Cut + Shopping Lists

  • A – 12 pieces of 4×4 lumber – 144″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 288″ long, 19 pieces – 189″ long, 2 pieces – 13 3/4″ long, 16 pieces – 14 1/2″ long FLOOR FRAME
  • C – 10 pieces of 3/4″ plywood – 48″x96″ long, 4 pieces – 48″x48″ long FLOOR
  • D – 1 piece of 2×4 lumber – 185″ long, 1 piece – 192″ long, 1 piece – 10 1/4″ long, 1 piece – 38 1/4″ long, 1 piece – 8 1/2″ long, 7 pieces – 91 1/2″ long, 2 pieces – 81″ long, 2 pieces – 86″ long, 3 pieces – 5″ long, 2 pieces of 2×6 lumber – 99″ long, 2 pieces – 35″ long FRONT WALL
  • E – 4 pieces of 2×4 lumber – 144″ long, 1 piece – 281″ long, 7 pieces – 91 1/2″ long, 4 pieces – 36″ long, 3 pieces – 12″ long, 3 pieces – 32 1/2″ long, 4 pieces of 2×6 lumber – 51″ long SIDE WALL
  • F – 4 piece of 2×4 lumber -144″ long, 1 piece – 281″ long, 16 pieces – 91 1/2″ long SIDE WALL
  • G – 2 pieces of 2×4 lumber – 185″ long, 1 piece – 192″ long, 9 pieces – 91 1/2″ long BACK WALL 
  • H – 20 pieces of T1-11 5/8″ siding – 48″x96″ long SIDING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Step 1: How to build a 16×24 shed floor

Building-the-floor-frame-16x24-gambrel-shed

Building-the-floor-frame-16×24-gambrel-shed

The first step of the project is to build the floor frame for the 16×24 shed. Cut the joists from 2×6 lumber at the right dimensions. Align the edges flush, drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Place the joists every 16″ on center. Fit 2×6 blockings between the joists, as show in the diagram, for a professional result.

Fitting the skids

Fitting the skids

Select the right location for the large gable shed and then level it Compact a layer of gravel and then lay the 4×4 skids. Fit the floor frame to the skids and align the edges flush. Use rafter ties to secure the frame to the skids. Leave no gaps between the components for a professional result.

Fitting the floor sheets

Fitting the floor sheets

Fit the 3/4″ plywood sheets to the floor frame. Align the edges flush and leave no gaps between the components. Drill pilot holes through the sheets and insert 1 5/8″ screws, every 8″, so you lock them into place tightly

 

Step 2: How to build the shed wall frames

Building-the-wall-frame

Building-the-wall-frame

The next step of the project is to build the wall frames for the shed. Start with the front wall, which has a large opening for the double doors and an opening for the single door. You can adjust the size of the small door opening, according to the size of the pre-hung door you are going to use.

Drill the pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square. Build the double header from 2×6 lumber and fit a piece of 1/2″ plywood between the beams. Insert 2 1/2″ screws and add glue so you can assemble the double headers.

Back-wall-frame

Back-wall-frame

Next, you have to assemble the back wall for the 16×24 barn shed. Cut the components from 2×4 lumber and 3 1/2″ screws. Place the studs every 24″, so you can get a professional result. Center the double top plate and lock it into place with 3 1/2″ screws.

Side-wall-frame

Side-wall-frame

Build the plain side wall from 2×4 lumber. as you can easily notice in the plans, you need to build the wall from two sections. In this manner, you can lift the walls easily and install them into place.

Side-wall-with-window-and-door-frame

Side-wall-with-window-and-door-frame

Build the side door with windows from 2×4 lumber. Use 2×6 lumber for the double headers. Make two wall sections and then lock them together, once you have installed them into place. You can adjust the size of the windows, so you get enough light inside the shed for your needs.

 

Step 3: Assembling the shed frame

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the shed. Align the edges flush and plumb them with a spirit level. Make sure the corners are square and lock them together tightly with 2 1/2″ screws. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor.

 

Step 4: Fitting the siding panels

Side wall - Siding

Side wall – Siding

Fit the T1-11 siding sheets to the sides of the 16×24 barn shed. Align the sheet to the wall frame and lock it into place with 6-8d nails. Leave no gaps between the sheets and lock to the framing, every 6-8d nails.

Back wall - Siding

Back wall – Siding

Fit the siding sheets to the back of the shed, as well. Align the sheets and leave no gaps between them. Use the same techniques described above.

Front wall - Siding

Front wall – Siding

Cut the siding sheets so they can fit around the door openings. Attach the sheets to the framing and lock them into place with 6-8d nails.

Side wall with windows - Siding

Side wall with windows – Siding

Fit the siding sheets to the side wall with windows. Make the cuts so you clear the window openings.

16x24 Barn Shed Plans

16×24 Barn Shed Plans

This is a complex shed project, due to its size. However, if you follow my instructions and pay attention to the local codes, you should get the job done in a professional manner. Don’t forget to take a look over PART 2 and PART 3 to learn how to build the roof for the large barn shed, as well as how to frame the double front doors.

If you want to get PREMIUM PLANS for this project, in a PDF format, please press GET PDF PLANS button bellow. Thank you for the support.

 

 

This woodworking project was about 16×24 gambrel shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

13 comments

Ben -

Hello,

I’m trying to get started building the same shed as posted as a 16 x 24 w/ Gambrel Roof; however, I’d like to increase the size. Would you have plans for a 20 x 24 version??

Thanks in advance,

~Ben

Reply
Ovidiu -

No, I don’t currently have plans for that size.

Reply
Jim -

Reviewing the plan here the materials list specifies 10 pieces of 4×4 lumber – 144″ long SKIDS
10 pieces of 4×4 lumber – 12′
While the drawings show 6 total skids. Wouldn’t this require 12 pieces 4x4x12’s?

Reply
Ovidiu -

Good catch. Thank you.

Reply
Kevin -

Do you have a printable version of the 16×24 Gambrel Shed Plans? If so please send me the link.

Reply
Ovidiu -

All plans are printable. Please read this: https://myoutdoorplans.com/faq/

Reply
Doug -

for the 16 X 24 shed floor frame, I see in the picture it doesnt have any seams for the 24′ length using the 2 x 6 lumber. Since they dont make 24′ 2 x 6’s, what is the recommended plan for doubling up these 2 x 6s to make the 24′ length? How do you recommend overlapping the 2 x 6’s safely to make the 24′ length?

Thanks,

Doug

Reply
Ovidiu -

Are you sure they don’t make 24 ft 2x6s? Do a google search. They have it at Lowes for example

Reply
Todd -

Would you happen to have the premium version of this 16×24 Gambrel shed for sale? I couldn’t find this size in your plans area. The roof is where I think I would need the most help. Also would you have recommendations on how you would put this on an incline of about 4-5 ft drop on the width of the shed? What kind of pillars, how many, etc? Will need to hold quite a bit of weight to handle the UTV as well as the storage. Thanks

Reply
Ovidiu -

No Premium Plans for that yet. I recommend you these plans for some info: https://myoutdoorplans.com/lean-to/how-to-add-a-porch-to-a-shed/

Reply
Aaron -

it is possible to download this plan, ive reviewed the how to cant seem to figure it out…

Thanks
Aaron

Reply
James Monroe -

I am considering 12 foot walls for the bottom level. Can I use 2x4x12 in place of the 2x4x8 or would I need to use a 2x6x12?

Reply
Gery -

What is the finished height of this 16’x24′ Shed?

Reply

Leave a Reply to Ben Cancel Reply