Home Shed 12×12 Shed with Porch Door Plans

12×12 Shed with Porch Door Plans

by Ovidiu

 

This step by step diy project is about 12×12 shed with porch doors and trims plans. This is PART 3 of the shed with front porch project, where I show you how to build the double doors for the storage shed and how to fit the decorative trims. The double side doors will allow and easy access to the interior of the shed. The front door with windows and porch adds unique charm to the project. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in a few day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

12×12 Shed with Porch Door Plans

Building-shed-with-front-porch

Building-shed-with-front-porch

 

Cut & Shopping Lists

  • N – 2 pieces of 2×4 lumber – 80 3/4″ long, 1 piece – 43″ long JAMBS
  • O – 2 pieces of 2×4 lumber – 73 3/4″ long, 2 pieces – 36″ long, 1 piece – 29″ long, 1 piece of T1-11 siding – 36″x80 3/4″ long DOOR
  • N – 2 pieces of 2×4 lumber – 80 3/4″ long, 1 piece – 79″ long JAMBS
  • O – 2 pieces of 2×4 lumber – 73 3/4″ long, 2 pieces – 36″ long, 1 piece – 29″ long, 1 piece of T1-11 siding – 36″x80 3/4″ long 2xDOOR
  • P – 6 pieces of 1×4 lumber – 97 3/4″ long, 2 pieces – 47 1/4″ long, 4 pieces – 24″ long, 4 pieces – 27″ long TRIMS
  • Q – 3 pieces of 2×4 lumber – 42 1/2″ long, 7 pieces of 2×2 lumber – 30 1/2″ long 4xRAILING

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building 12×12 shed doors

Front door jambs

Front door jambs

Fit the 2×4 jambs around the front door opening. Align the edges with attention, drill pilot holes and insert 2 1/2″ screws, every 8″ along the framing.

Front-door

Front-door

Build the door panel from T1-11 siding and the trims from 2×4 lumber. Use 1 5/8 screws to lock the panels to the trims. Add glue to the joints and align the edges flush. The door panel is the piece you have cut out when installing the sheets to the front wall.

Fitting the front door

Fitting the front door

Fit the door to the front of the shed. Align the edges with attention and use hinges to lock them to the jambs. Make sure the doors open and close easily and then install the latch.

Side door jambs

Side door jambs

Next, you need to build jambs for the side double doors. Cut the jambs from 2×4 lumber and secure them to the wall with 2 1/2″ screws.

Side-doors

Side-doors

Build the double doors in the same manner described above. Use T1-11 siding and 2×4 lumber.

Fitting the side doors

Fit the double doors into place and lock them to the jambs with hinges. Make sure the doors open and close easily and then use a latch to lock the doors into place tightly.

Side trims

Side trims

Continue the project by fitting the 1×4 trims to the sides of the shed. Use 2″ nails every 8″ along the framing of the shed.

Back wall trims

Back wall trims

Fit the 1×4 trims to the backof the shed. Align the edges with attention and insert 2″ nails to lock the trims into place tightly.

Front trims

Front trims

Fit the trims to the front of the shed and back, as well.

Building the railings

Building the railings

Build the porch railings from 2×4 lumber and 2×2 lumber. Place the balusters equally spaced. Drill pilot holes through the cleats and insert 2 1/2″ screws into the balusters.

Fitting the railings

Fitting the railings

Fit the panels to the front porch. Drill pocket holes at both ends of the cleats and insert 2 1/2″ screws into the posts. Make sure the corners are square and leave no gaps between the components.

Free 12x12 shed with porch plans - Free DIY Plans

Free 12×12 shed with porch plans – Free DIY Plans

Last but not least, you need take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to the components, so you can protect them from decay and so you can enhance the look of the shelter. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.

 

 

This woodworking project was about 12×12 shed with porch  doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

calvin -

I looked through the whole project but don’t see the directions for the actual porch floor. Was this intentionally left out?

Reply
Ovidiu -

There is no wooden floor. This shed is designed for a gravel porch or concrete slab.

Reply

Leave a Reply to Ovidiu Cancel Reply