Home Shed 10×20 Lean to Office Shed Roof Plans

10×20 Lean to Office Shed Roof Plans

by Ovidiu

 

This step by step diy project is about 10×20 lean to office shed roof plans. This is PART 2 of the lean to shed project, where I show you how to build the roof, the modern top windows, the exterior panels and the stairs. This shed is a nice addition if you are a freelancer and work from home, or you just need a retreat area where you can read a good book and regain inspiration. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Lean to Roof for a 10×20 Shed Plans

Building-a-10x20-modern-shed

Building-a-10×20-modern-shed

 

Cut & Shopping Lists

  • H – 13 pieces of 3/4″ plywood – 4’x8′ long, 2 pieces – 2’x8′ long, 1 piece – 16″x48″ long, 2 pieces – 16 1/2″x48″ long, 2 pieces – 8 1/4″x24″ long PANELS
  • I – 20 pieces of 2×6 lumber – 120″ long, 14 pieces – 8 1/2″ long RAFTERS
  • J – 2 pieces of 1/2″ plywood – 10″x96″ long, 2 pieces – 10″x48″ long, 6 pieces – 48″x96″ long, 3 pieces – 48″x48″ long ROOF
  • K – 2 pieces of 1×8 lumber – 144″ long, 4 pieces – 130 3/4″ long TRIMS
  • L – 280 sq ft of tar paper, 280 sq ft of asphalt shingles ROOFING
  • M – 2 pieces of 2×2 lumber – 15 1/2″ long, 2 pieces – 44 1/2″ long, 2 pieces of 1×2 lumber – 15 1/2″ long, 2 pieces – 44 1/2″ long, 1 piece of 1/4″ plexiglass – 18 1/2″x44 1/2″ long 5xWINDOW
  • M – 1 piece of 2×2 lumber – 44 1/2″ long, 1 piece – 45 1/2″ long, 1 piece – 8″ long, 1 piece – 15 1/2″ long, 1 piece of 1×2 lumber – 44 1/2″ long, 1 piece – 45 1/2″ long, 1 piece – 8″ long, 1 piece – 15 1/2″ long, 1 piece of 1/4″ plexiglass – 44 1/2″x18 1/2″ long 2xWINDOW
  • O – 4 pieces of 2×10 lumber – 26″ long STRINGERS
  • P – 4 pieces of 1×6 lumber – 72″ long STEPS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a roof for a 10×20 shed

Rafters

Rafters

The first step of the PART 2 project is to build the rafters for the lean to shed. Mark the cut lines on the 2×6 beams and get the job done with a circular saw. Smooth the edges with sandpaper.

Fitting the rafters - 10x20 modern shed

Fitting the rafters – 10×20 modern shed

Fit the rafters to the top of the shed and place them equally-spaced, every 16″ on center. Use rafter ties with the appropriate structural nails / screws to lock the rafters into place tightly.

Building the side overhangs

Building the side overhangs

Next, you need to build the side overhangs. Use 2×4 lumber for the components. Drill pilot holes and lock the overhangs to the shed roof with 2 1/2″ screws.

Side roof supports

Side roof supports

Use 2×4 lumber for the side roof supports. Lock them into place with 2 1/2″ screws and pocket holes.

Frame for top side windows

Frame for top side windows

Use 2×2 lumber for the side top windows. Cut the components for the window frames from 2×2 lumber. Drill pilot holes and insert 2 1/2″ screws to assemble the frames. Align the edges flush.

Assembling-the-windows

Assembling-the-windows

Use 1/8″ or 1/4″ plexiglass for the windows. Attach the plexiglass to the window frame with construction glue. Use 1×2 lumber for the trims. Add construction glue to lock them into place tightly.

Top front wall frame

Top front wall frame

Build the windows for the top of the front wall. Assemble the frame with 2x2s and 2 1/2″ screws. Make sure the corners are square and align the edges flush.

Front top window

Front top window

Use 1/8″ or 1/4″ plexiglass for the windows. Attach the plexiglass to the window frame with construction glue. Use 1×2 lumber for the trims. Add construction glue to lock them into place tightly.

Fitting the top side windows - modern shed

Fitting the top side windows – modern shed

Fit the windows to the sides of the modern shed. Drill pilot holes through the 2×2 frame and insert 2 1/2″ screws to lock the windows to the frame.

Top front wall windows

Top front wall windows

Fit the windows to the top of the front wall. Use screws to secure the 2×2 framing to the wall frame.

Fitting the double doors and windows

Fitting the double doors and windows

Fit the double doors to the front opening and the window to the side opening.

Front wall panels

Front wall panels

For the exterior walls you can use 3/4″ plywood sheets and make 1/4″x1/2″ grooves with a router, following the pattern shown in the plans. Alternatively, you can go for 1/2″ OSB and cover the shed with house wrap. Last but not least, install cement boards with 1/4″ gaps between them, to create the modern look to your office. For these plans, I will keep it simple and assume you will be using the 3/4″ plywood method.

Sde-panels-for-10x20-modern-shed

Sde-panels-for-10×20-modern-shed

Make the panels for plain side wall of the office.

Back wall panels - 10x20 modern shed

Back wall panels – 10×20 modern shed

Make the panels for the back wall of the large modern office shed.

Side-panels-for-modern-shed

Side-panels-for-modern-shed

Make the panels for the side wall with window. Make the cuts so you can fit the panels around the opening.

Fitting the sheets to the exterior of the shed

Fitting the sheets to the exterior of the shed

Continue the project by attaching the 3/4″ plywood sheets to the exterior of the shed. Align the edges flush and use 8d nails to lock the panels to the framing, every 8″.

Roof sheets - 10x20 modern shed

Roof sheets – 10×20 modern shed

Attach the 1/2″ plywood sheets to the roof of the lean to shed. Align the edges flush and secure them to the rafters using 1 5/8″ screws. Make sure there are no gaps between the sheets for a professional result.

Side roof trims

Side roof trims

Fit the 1×8 trims to the sides of the roof. Attach the trims to the overhangs with 6d nails.

Front and back roof trims

Front and back roof trims

Fit a 1×8 trim to the front of the lean to shed, as shown in the diagram. Align the edges with attention and secure it to the ends of the rafters using 6″ finish nails.

Fitting the roofing - 10x20 modern office shed

Fitting the roofing – 10×20 modern office shed

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under. Afterwards, attach the asphalt shingles to the roof, starting with the left bottom side of the roof. Read the manufacturer’s instructions to understand how to install the shingles into place properly.

Building the stringer boards

Building the stringer boards

Use 2×10 lumber for the front stairs stringers. Mark the cut lines to the boards and get the job done with a circular saw. Smooth the edges flush.

Fitting the joists to the front of the shed

Fitting the joists to the front of the shed

Fit the stringer boards to the front of the shed. Use joist hangers to lock the stringers to the floor frame of the office shed.

Fitting the boards to the steps

Fitting the boards to the steps

Fit the 1×6 decking boards to the stringers. Make sure you have equal overhangs on both sides. Drill pilot holes through the boards and insert 1 5/8″ screws to lock them into place tightly.

10x20 Lean to Shed Plans - side view

10×20 Lean to Shed Plans – side view

Seen from the side, this office shed has that unique and distinctive modern look that attracts you to it and creates a cozy atmosphere that is ideal for work inspiration.

10x20 Lean to Shed Plans - back view

10×20 Lean to Shed Plans – back view

Fill the holes with wood putty and let it dry out for a day. Smooth the surface and then apply a few coats of paint / stain to enhance the look of the backyard office.

10x20 Lean to Shed Plans - front view

10×20 Lean to Shed Plans – front view

This make for a great backyard working space, because you will get a lot of light through the windows and front double doors. In addition, you can insulate the walls, the floor and the roof of the shed and add electricity and other goodies. With little modifications, this shed can also be a wonderful tiny house.

10x20-lean-to-modern-shed-plans

10×20-lean-to-modern-shed-plans

You can build this office shed with a modern design in one week, if you know the basic woodworking skills and have a few tools. You should be confident you can pull it off and save a ton of money during the process. I have more modern shed plans, so take a look HERE. See a list of all the projects that I have on my blog: HERE.

 

 

This woodworking project was about 10×20 lean to office shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

5 comments

steve -

Hi am lookingto build the 20 X10 office can see all the plans on website but nowhere to download as a pdf am I missing something?

Reply
Ovidiu - Reply
Daniel Bilodeau -

Hi could you share the 3d plan?

Reply
Freddy -

Do you have the wrong size listed for 2×6 rafters? I see the measurement is 144in(12ft) but the materials call for 120in (10ft)

Reply
Ovidiu -

Thanks. Updated the list

Reply

Leave a Reply to Ovidiu Cancel Reply