Home 10x14 10×14 Lean to Shed – Free DIY Plans

10×14 Lean to Shed – Free DIY Plans

by Ovidiu

 

This step by step diy project is about 10×14 lean to shed plans. I have designed this simple to build shed so you can store bikes, tools, furniture and other items, while saving money. The lean to roof makes this construction ideal for a small backyard and for a tight budget. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Roof pitch is 3:12.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

10×14 Lean to Shed – Free DIY Plans

Building-a-10x14-lean-to-shed

Building-a-10×14-lean-to-shed

 

Cut List

  • A – 4 pieces of 4×4 lumber – 168″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 168″ long, 12 pieces – 117″ long FLOOR
  • C – 2 pieces  of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x72″ long, 1 piece – 24″x96″ long, 1 piece – 24″x72″ long FLOORING
  • D – 2 pieces of 2×4 lumber – 120″ long, 1 piece – 113″ long, 9 pieces -87″ long 2xSIDE WALL
  • E – 2 pieces of 2×4 lumber – 168″ long, 1 piece – 161″ long, 14 pieces – 87″ long BACK WALL
  • F – 2 pieces of 2×4 lumber – 48″ long, 2 pieces – 78 1/2″ long, 12 pieces – 87″ long, 1 piece – 161″ long, 1 piece – 168″ long, 6 pieces – 3″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
  • F – 2 pieces of 2×4 lumber – 168″ long, 14 pieces – 27″ long TOP FRONT WALL
  • G – 5 pieces of T1-11 siding – 48″x91 1/2″ long, 2 pieces – 24″x91 1/2″ long, 1 piece – 11 1/2″x48″ long SIDING

Shopping List

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

 

 

Building a 10×14 lean to shed

Building-the-floor-frame-10x14-lean-to

Building-the-floor-frame-10×14-lean-to

First of all, you need to build the floor frame. Cut the components at the right dimensions and then lay them on a level surface. Drill pilot holes through the rim joists and then insert 3 1/2″ screws into the perpendicular beams. Place the joists every 16″ on center, as in the diagram. Alternatively, you can use joist hangers. Make sure the corners are square and the edges flush, before inserting the screws.

Fitting the skids

Fitting the skids

Select the location for the shed and remove the vegetation layer. Level the ground thoroughly and then fit the 4×4 skids under the floor frame. Align the edges and use rafter ties to secure the skids to the frame of the floor. Use a spirit level to make sure the frame is horizontal in all directions. Check out the local building codes before building the shed, so you make sure you comply with the requirements.

Fitting the floor sheets

Fitting the floor sheets

Use 3/4″ tongue and groove plywood sheets for the floor of the shed. Cut the sheets at the right dimensions, as shown in the diagram, and then lay them to the floor frame. Align the edges flush and insert 1 5/8″ screws, every 8″ along the framing. Leave no gaps between the sheets for a professional result.

 

Building the shed wall frames

Building-the-front-wall

Building-the-front-wall

Continue the project by assembling the front wall frame. Use 2×4 lumber for the front wall frame. Use 2×4 lumber and 1/2″ plywood for the double header. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and align the edges flush.  You can adjust the size of the door opening to suit your needs. Moreover, you can frame windows, if you want to have light inside the shed.

Back-wall-frame

Back-wall-frame

Build the frame for the back wall from 2×4 lumber. Cut the components from 2×4 lumber at the right dimensions. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and place the studs every 16″ on center.

Building-the-side-wall-frames

Building-the-side-wall-frames

Build the side walls for the shed using the same techniques described above and the information from the diagram. Place the studs every 16″ on center.

 

Assembling the shed framing

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the shed. Align the edges with attention and plumb the walls with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Lock the adjacent walls together tightly using 3 1/2″ screws. Check if the corners are right-angled, for a professional result.

Building the top wall frame

Building the top wall frame

Assemble the top wall frame for the front of the shed from 2×4 lumber. Take accurate measurements and then get the job done with a circular saw. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 16″ on center and make sure the corners are square.

Fitting the top wall frame

Fitting the top wall frame

Fit the small frame to the top of the front wall. Align the edges with attention and plumb it with a spirit level. Drill pilot holes through the bottom plate and insert 3 1/2″ screws into the bottom.

 

Fitting the siding sheets

Front wall siding sheets

Front wall siding sheets

Cut the T1-11 siding sheets at the right dimensions, as shown in the diagram. Fit T1-11 siding panels to the front of the shed. Align the sheet to the top plate of the side walls and then insert 2″ nails, every 8″ along the framing.

Back wall siding

Back wall siding

Then, attach the siding sheets to the back of the shed. Insert 2″ nails, every 8″ along the framing. You will use the cutout panel for the door.

10x14 Lean to Shed - Free plans

10×14 Lean to Shed – Free plans

If you have a tight backyard and you need storage space for tools, furniture and other items, this shed project is a good choice. The lean to roof makes it easy to build and very budget friendly.

10x14 Lean to Shed Plans

10×14 Lean to Shed Plans

Make sure you take a look over PART 2 and PART 3 of the project, so you learn how to build the lean to roof and how to build the decorative trims. I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE.

If you want to download this project as a PDF file, with 1 full Cut list and 1 full Shopping list, please check out the GET PDF PLANS button bellow.

 

 

This woodworking project was about 10×14 lean to shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

5 comments

Jean Malinsky -

I’m looking for plans to build the Maxi Barn shed 10’x14′ with the doors on the 14′ side. Thank you

Reply
Sam -

I don’t understand why you don’t have all the plans available with a “Premium” option. I would gladly buy these 10×14 plans just to have them in a PDF and “ad free”. As it is I’ve spent over an hour trying to figure out how to buy them. I give up! I wish you luck, I really do. You’ve done a lot of great work here, I just wish it was easier to put to use.

Reply
Ovidiu -

Premium plans require a lot of work and the sales aren’t great, so I cannot have them for all projects. You can still download the free plans: https://myoutdoorplans.com/faq/

Reply
Pat Reynolds -

I paid 4.99 for the pdf – I never received anything.. Is this all hoax

Reply
Ovidiu -

First of all the PDF is 7.99 and not 4.99 and secondly I checked and there is no order with your email or name. If you bought something it wasnt from me.

Reply

Leave a Reply to Jean Malinsky Cancel Reply