Home Shed 10×12 Saltbox Shed Door and Trims Plans

10×12 Saltbox Shed Door and Trims Plans

by Ovidiu

 

This step by step diy project is about 10×12 shed roof plans. This is PART 3 of the sturdy storage shed, where I show you how to build the double front doors and how to fit the trims. Make sure you check out the first and second part of the project, so you learn how to build the frame of the shed, as well as the roof. You can easily adjust the size and the design of the doors, to suit your needs. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

10×12 Saltbox Shed Door and Trims Plans

Building-a-10x12-saltbox-shed

Building-a-10×12-saltbox-shed

 

Cut & Shopping Lists

  • N – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 79″ long JAMBS
  • O – 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 73″ long, 1 piece – 29″ long, 1 piece of T1-11 – 36″x80″ long 2xDOOR
  • P – 2 pieces of 1×4 lumber – 95 3/4″ long, 2 pieces – 71 3/4″ long, 2 pieces – 93 3/4″ long, 2 pieces – 69 3/4″ long, 2 pieces – 32″ long, 2 pieces – 39″ long TRIMS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Building double shed doors

Door jambs

Door jambs

Fit 2×4 jambs around the door opening. Cut the components at the right dimensions and secure the jambs into place with 2 1/2″ screws. Align the edges flush.

Building-the-doors

Building-the-doors

Continue the project by assembling the double shed doors. Cut the frame of the 2×4 lumber at the right dimensions and lock them into place with 2 1/2″ screws and construction glue. Align the edges flush and make sure the corners are square. Attach the T1-11 siding sheets with 2″ nails, every 8″ along the framing.

Fitting the double doors

Fitting the double doors

Fit the double shed doors to the opening and lock them to the jambs with hinges. In addition, install a latch to keep the doors shut.

Side trims

Side trims

Cut and fit the 1×4 trims to the sides of the shed. Align the edges with attention and insert 2″ nails to lock them into place tightly.

Front wall trims

Front wall trims

Fit the trims to the front of the shed. Align the edges with attention and secure them to the shed with 2″ nails.

Back wall trims

Back wall trims

Fit the trims to the back of the shed.

10x12 saltbox shed plans

10×12 saltbox shed plans

Make sure you check out the rest of the project, so you learn how to frame the 10×12 garden shed and how to build the gable roof. See PART 1 and PART 2. In addition, I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. You can also add 1×4 decorative trims to the corners of the shed.

 

 

This woodworking project was about 10×12 double shed door plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

2 comments

Steve -

I wish there was a master list for materials needed. Just kind of frustrating bouncing from line to line and page to page to add everything up.

Reply
Ovidiu -

My Premium Plans have a “master list”. Unfortunately, I don’t have a premium plan for this project.

Reply

Leave a Reply to Ovidiu Cancel Reply