Home 10x16 Simple 10×16 Rectangular Gazebo Plans

Simple 10×16 Rectangular Gazebo Plans

by Ovidiu

 

This step by step diy project is about simple 10×16 rectangular gazebo plans. This is a simple gazebo with a hip roof that you can build in one weekend, if you follow my instructions. This rectangular gazebo features a concrete floor, 6×6 posts and a hip roof with a generous slope. I have reinforced the roof of the gazebo so it withstand strong winds and snow. Make sure you read the local codes so you can comply with the legal requirements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

Simple 10×16 Rectangular Gazebo Plans

Building-a-10x16-hip-roof-gazebo

Building-a-10×16-hip-roof-gazebo

 

Cut & Shopping Lists

  • A – 4 pieces of 6×6 lumber – 90 1/2″ long POSTS
  • B – 2 pieces of 2×6 lumber – 192″ long, 4 pieces – 120″ long TOP PLATES
  • C – 8 pieces of 2×6 lumber – 36″ long BRACES
  • D – 2 pieces of 2×6 lumber – 40″ long, 1 piece – 73 1/2″ long BOTTOM RAFTERS

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

It’s that simple to build a gazebo – Video!

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

10×16 Grill Gazebo Plans

Laying out the posts for the 10x16 gazebo

Laying out the posts for the 10×16 gazebo

The first step of the simple gazebo project is to build the posts. As you can see in the diagram, you need to use 6×6 lumber for the posts. Use a circular saw to make notches to the top of the posts.  Next, choose the location for the garden gazebo and to lay out the location of the posts. Make sure the surface is perfectly level and it complies with the local building codes. You can attach the posts to an already existing concrete slab, or you can secure the posts to the ground. Use batter boards and string to lay out the location of the posts. Apply the 3-4-5 rule to the corners and make adjustments until the diagonals are perfectly equal.

Anchoring the posts of the anchor

Anchoring the posts of the anchor

You can set the posts in concrete or you can pour 3′ deep footings and use posts anchors. Considering this is a light outdoor project, you can set the posts to anchors. That is why, these plans are designed having that assumption in mind (concrete anchors).

Top-plates-for-10x16-gazebo

Top-plates-for-10×16-gazebo

Use 6×6 lumber for the top rails. Use a circular saw to make 2 3/4″ deep cuts inside the marked areas. Remove the excess with a hammer and smooth the recess with a chisel.

Next, fit the rails to front and back of the outdoor gazebo. Align the edges flush and make sure the corners are square. Drill pilot holes and insert 5 1/2″ screws to lock them into place tightly.

Fitting the top plates - 10x16 gazebo

Fitting the top plates – 10×16 gazebo

Fit the perpendicular plates to the top of the gazebo. Align the edges flush, drill pilot holes and insert 5 1/2″ screws to lock them into place tightly.

Building the braces for the gazebo

Building the braces for the gazebo

Use 2×6 lumber for the braces. Use a miter saw to make 45 degree cuts at both ends of the braces and then smooth the edges with sandpaper.

Fitting the braces to the 10x16 gazebo

Fitting the braces to the 10×16 gazebo

Fit the braces to the rectangular gazebo frame, as shown in the diagram. Before fitting the braces and inserting the 3 1/2″ screws, make sure the posts are plumb.

Fitting-the-top-ridge-10x16-hip-roof-gazebo

Fitting-the-top-ridge-10×16-hip-roof-gazebo

Use 2×6 lumber for the ridge beam and to the supports. Center the supports to the beams, drill pocket holes and insert 2 1/2″ screws. Make sure the corners are square and plumb them vertically. Drill pocket holes at the top of the supports and insert 2 1/2″ screws to secure the ridge beam into place.

10x16 gazebo plans free

10×16 gazebo plans free

Take a look over PART 2 of the gazebo project, so you learn how to build the hip roof for this rectangular garden gazebo.

How-to-build-a-10x16-gazebo

How-to-build-a-10×16-gazebo

This 10×16 gazebo is build on a frame that is made from 6x6s. You can easily add railings to the gazebo, if you want to build a cute serving area. You can tackle this project in one weekend and save hundreds of the dollars. Please take a look over the rest of my woodworking plans, because I have over 1500 free designs.

If you want to get this plan as a PDF file with 1 cut list and 1 shopping list (plans differ from the free version), please take a look over the GET PDF PLANS button bellow. Thank you for the support.

 

 

This woodworking project was about 10×16 gazebo plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

7 comments

Marcos -

Hi, thanks so much for such wonderful list of free plans. I’m wondering if I can modify this for a 12×14 using 6×6’s posts? Thanks

Reply
Ovidiu -

Well, it would be a complex modification, because other than using the same techniques, all measurements would change.

Reply
Brannon Thompson -

can you tell me specifically what the slope is?

Reply
RODNEY RIDER -

Can you send me paper plans for 10×16 gazebo with hip roof ?

Reply
Ovidiu -

No

Reply
Michael Phillips -

If i were to make this a 12’x16′ do you think i should add another set of 6″x6″ post in the middle? to make it a total of 6″x6″ posts to 6. i dont think i would miter in that middle post though into cross beams. have decent snow fall here.

Reply
Ovidiu -

Yes, add the middle posts. You can also look at the 12×16 hip gazebo premium plans in the Shop, they use a different technique (no cuts in the side plates), which has 4 posts and it can hold snow.

Reply

Leave a Reply to Ovidiu Cancel Reply