Easy to Build Bench Plans

Ovidiu 4 GapDice RANDOM PLAN

This step by step diy project is about easy to build bench plans. This bench has been designed by Clint Norwood, who asked me to make the 3d plans and share it with you. Since I think this is a great design for a simple bench, here are the step by step plans. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.



Projects made from these plans




Easy to Build Bench Plans




  • A – 4 pieces of 2×4 lumber – 12″ long LEGS
  • B – 2 pieces of 2×4 lumber – 9″ long, 2 pieces – 12″ long SUPPORTS
  • C – 3 pieces of 2×4 lumber – 42″ long SEAT
  • D – 2 pieces of 1×4 lumber – 12″ long, 2 pieces – 43 1/2″ long TRIMS

 One day



Building a simple and cheap bench



The first step of the project is to build the legs for the bench. Cut all the components at the right dimensions from 2×4 lumber. In addition, drill the pocket holes, as in the plans and insert 2 1/2″ screws to lock the components together tightly. Make sure you place the pocket holes downward oriented, so you hide them. Add waterproof glue to the joints and make sure the corners are square.



Attach the 2×4 slats to make the seat of the bench. Drill pilot holes at both ends of the slats and insert 2 1/2″ screws so you lock the slats into place tightly.



Attach 1×4 trims to the bench. Align the edges flush and insert 1 5/8″screws, after drilling the pilot holes. Alternatively, you can use 1 1/2″ brad nails and glue.



Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to enhance the look of the bench.



This is a simple project you should be able to build in a few hours without much effort. Remember that you need to adjust the size of the components so they suit your own needs. Don’t forget to check out the rest of my outdoor furniture projects, as I have more designs on the site.



This woodworking project was about easy to build bench plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

Shed      Furniture      Animals      Kids      Garden      Indoor


  1. Tina at - Reply

    My husband and I recently aquired a very large amount of recyclable palletts and reclaimed wood. Enough to make a catio, a sizable deck, plus many, many more projects. The simple bench is on the list! Can’t wait to get started.

    • Jack at - Reply

      Sounds great! Good luck and let me know how it goes.

  2. Maggie at - Reply

    You mention 2 1/2 screws and 2 1/2 pocket screws. How many do you need of each and what diameter? Is this sturdy enough to hold two adults?

    • Ovidiu at - Reply

      20 pieces of each, #6 or #8 it doesn’t matter. Yes, it is very sturdy.

Click here to cancel reply.

error: Content is protected !!