Home 2x4 Ground Level Deck made from 2x4s Plans

Ground Level Deck made from 2x4s Plans

by Ovidiu

 

This step by step diy project is about ground level deck made from 2x4s plans. I have designed this deck so you can build it entirely from 2x4s. Considering that you will use 2x4s for the joists, at a 12″ span, you cannot make the deck larger than 8’x8′. As you will see in this project, this light construction doesn’t require complex tools or carpentry techniques, so any person with basic skills can get the job done in just a weekend. Make sure you read the local codes, so you comply with the regulations.

Before starting the actual construction you should study attentively the local building codes, to find out whether you need a building permit and if there are some restrictions for your project. Choosing the right location for your deck is essential, so make sure you check if there will get enough light or if it will add character to your property. Using weather-resistant materials is also important, so buy at least pressure-treated lumber. See all my Premium Plans HERE.

 

 

Projects made from these plans

 Add-image

 

 

Ground Level Deck made from 2x4s Plans

Building-a-ground-level-deck

Building-a-ground-level-deck

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber – 96” long, 9 pieces – 93” long JOISTS
  • B – 27 pieces of 2×4 lumber – 96” long DECKING
  • C – 4 pieces of 2×4 decking – 99” long TRIMS

Tools

 Hammer, Tape measure, Framing square

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

8×8 deck plans

Building-the-frame-for-the-deck

Building-the-frame-for-the-deck

Lay out the concrete blocks. In order to get a professional and accurate result, we recommend you to use batter boards and string. Check if the corners are right angles by applying the 3-4-5 rule and make sure the diagonals are equal. Use a spirit level to check if the footings are horizontal.

The next step of the project is to assemble the floor frame. As you can notice in the plans, you should leave 12″ OC between the joists, in order to enhance the rigidity of the frame. Use joist hangers to secure the joists to the support beams.

Fitting the concrete blocks

Fitting the concrete blocks

Next, attach the joists frame to the concrete blocks. Align the edges with attention, drill pilot holes and insert 3 1/2″ screws to lock them into place.

Fitting-the-deck-boards

Fitting-the-deck-boards

Installing the decking is a straight forward job is the  support surface is rigid and perfectly level. Align the boards at both ends before drilling pilot holes and driving in the 2 1/2″ galvanized screws. Place a nails between the slats to get consistent gaps.

Fitting the trims to the deck

Fitting the trims to the deck

Fitting 2×4 trims to the end of the slats is not compulsory, but it will definitely enhance the look of your deck and hide the cut edges. Use a miter saw to make the 45 degree cuts. Add wood glue to the edges and secure them into place. Insert 2 1/2” finishing nails to enhance the bind of the joints.

Deck made from 2x4s Plans

Deck made from 2x4s Plans

Fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of stain to protect the components from the elements.

2x4 Deck Plans

2×4 Deck Plans

You can fit deck benches to this project, so make sure you take a look over the plans HERE. You can add railings, deck planters or other elements. In addition, I recommend you to check my 2×4 deck bench plans HERE.

 

 

This project was about 8×8 deck plans. If you want to see more outdoor plans, we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends, by using the social media widgets.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

3 comments

anniece evans -

love this site i’m planning to build my shed and deck thank you

Reply
Jim Burruss -

Very helpful. Thank you for sharing this.

One suggestion to perhaps make it easier to build:

In the Building-the-frame-for-the-deck diagram, the distances between the 2x4s (9 3/4, 10 1/2, etc.) should be shown as center-to-center distances.

I feel that most builders would prefer that approach because all locating marks can be made before assembly.

Best regards

Reply
Jim -

Forgot to also mention that those measurements should all be from the end of the board, not between the 2x4s.

Cheers

Reply

Leave a Reply to Jim Burruss Cancel Reply