Home Brags DIY 12×16 Barn Shed

DIY 12×16 Barn Shed

by Ovidiu

 

This section of our site is dedicated to woodworkers and DIY-ers that have built a project inspired by our outdoor plans and have sent us photos and a few comments about their woodworking endeavor.

We strongly encourage you to send us photos and your feedback regarding the projects on MyOutdoorPlans. Please send us the materials at admin@myoutdoorplans.com or using the contact form.

 

 

DIY 12×16 Barn Shed

Pouring-the-concrete-slab-for-the-shed

 

Building-the-walls

 

Building-the-barn-shed-roof

 

Barn-shed-loft

 

From Richard Mitchell, 

My 12×16 barn project will come in at around $6000 by the time I’m done, perhaps a bit more. I started with a monolithic pour thickened wall slab foundation, bolted on sill plates and framing, added siding, etc. I’ll add a few photos here.

I’ve detailed some of the modifications in my comments on the plans at your website. Most importantly, I used 2×6 loft floor joists and a post and beam under the joists to give them better load-bearing capacity. I’d be pretty reluctant to put much weight on 2×4 joists spanning 12 feet – even 16″ oc.

I also added electric service with a 2 breaker panel – one for lighting and one for outlets (all GFCI) – 4 LED shop light panels (from Costco, $29 each), and I added an electric hoist from Harbor Freight. The lift is mounted to a 4×4 that is well supported by what is essentially a header beam over the top of the hay loft door.

My gambrel roof extends 16″ beyond the edge of the barn – and I spanned the roof decking to extend out to the edges of the overhang for strength on both ends. I still have roofing left to complete.

 

 

From Plans: http://myoutdoorplans.com/shed/12×16-barn-shed-plans/

Difficulty Level: easy

Time Required: –

Total Cost: 6000$

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

1 comment

Korey -

Hi Richard, do you have any recent photos of your shed now that it’s finished (I assume)?

Reply

Leave a Reply to Korey Cancel Reply