This step by step diy woodworking project is about 8×10 goat shelter plans free. The project features instructions for building a basic goat shelter. This is a heavy duty construction that will stand time for many years in a row. The construction features a large access opening to the front of the shed. Make sure you take a look over the rest of plans to see alternatives and more projects for your garden.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.
Projects made from these plans
It’s that easy to build a goat shelter!
Goat Shelter Plans
- A – 2 pieces of 4×4 lumber – 96″ long, 2 pieces – 120″ long SKIDS
- B – 2 pieces of 2×4 lumber – 120″ long, 7 pieces – 81 3/4″ long, 2 pieces – 44 1/2″ long, 2 pieces – 6 1/4″ long FRONT WALL
- C – 2 pieces of 2×4 lumber – 89″ long, 5 pieces – 57″ long, 1 piece – 5 1/2″ long, 1 piece – 11 3/4″ long, 1 piece – 18 1/4″ long 2xSIDE WALL
- D – 2 pieces of 2×4 lumber – 120″ long, 8 pieces – 57″ long BACK WALL
- E – 2 pieces of 3/4″ plywood – 48″x84 3/4″ long, 1 piece – 24″x84 3/4″ long, 2 pieces – 48″x60″ long, 1 piece – 24″x60″ long, 2 pieces – ” 48″x75″ long, 2 pieces – 48″x87 3/4″ long WALLS
- F – 9 pieces of 2×4 lumber – 120″ long RAFTERS
- G – pieces of 3/4″ plywood – 31 1/2″x48″ long, 2 pieces – 48″x96″ long, 1 piece – 24″x31 1/2″ long, 1 piece – 24″x96″ long ROOFING SHEETS
How to build a goat shelter – base
The first step of the project is to assemble the base for the goat shed. Cut the components from 4×4 lumber.
Use a circular saw to make the notches at both ends of the beams. Use a chisel to clean the recess, making sure the corners are square.
Assembling the frame of the shed
Next, you need to assemble the walls for the goat shelter. Cut the components from 2×4 lumber. Drill pilot holes through the plates and insert 2 1/2″ screws into the studs. Use the information from the diagram to get the job done in a professional manner. Make sure the corners are square for a professional result.
Build the front wall from 2×4 lumber. As you notice in the plans, you need to create a door opening for easy access. Build a double 2×4 header for adding strength to the structure. Make sure the edges are aligned, as well as if the corners are square.
Fit the front and the back walls to the skids, as shown in the diagram. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the skids. Use temporary braces to secure the walls into place after plumbing them with a spirit level.
Build the side walls from 2×4 lumber. Drill pilot holes through the plates and insert 2 3 1/2″ screws into the studs. Take accurate measurements before inserting the screws, to get the job done in a professional manner.
Fit the side walls to the goat shelter, as shown in the plans. Make sure the edges are aligned and check if the corners are square. Drill 3 1/2″ screws through the plates into the skids. In addition, insert 2 1/2″ screws into the adjacent walls to enhance the rigidity of the structure.
Fitting the wall panels
Fit the 3/4″ plywood panels to the front of the goat shed. Align the edges with attention and secure the panels to the framing using 1 1/4″ screws or nails. Make the cuts to the panel around the door opening.
Fit the 3/4″ plywood panels to the back wall, as shown in the diagram. Leave no gaps between the panels for a professional result. Use 1 1/4″ screws or nails to lock the panels to the frames, every 8″ along the framing.
Building the lean to roof
Build the rafters from 2×4 lumber. Cut one end of the rafters at 75 degrees.
As you can easily notice in the plans, you need to make notches to the top of the rafters. Mark the cut lines and get the job done with a circular saw.
Also make notches to the bottom of the rafters using the information form the diagram.
Place the rafters to the top of the structure. Use the information from the diagram to space the rafters properly. Drill pilot holes through the rafters and insert 3 1/2″ screws into the top plates.
Fit the supports to the sides of the shed. Cut the top of the supports at 75 degrees.
Fit the 3/4″ plywood panels to the sides of the goat shed. Cut the top of the panels at an angle to fit into place properly.
Ones of the last steps of the outdoor project is to attach the roofing sheets to the rafters. Use 3/4″ tongue and groove plywood sheets. Leave no gaps between the sheets. Drill pilot holes and insert 2″ screws along the rafters, every 8″.
Alternatively, you can fit corrugated metal sheets to the rafters, if you want to save money and time.
When fitting the sheets, make sure you leave 3 1/2″ overhang on both sides of the shed.
Cover the roof with tar paper, making sure the strips overlap at least 2″. Then install the asphalt shingles starting with the bottom of the roof. Read here more about how to install the asphalt shingles.
Fill the holes and dents with wood putty and let it dry out for several hours. Use 120-200 grit sandpaper to smooth the surface. Remember that you can adjust the design and size of the goat shelter to suit your needs. Check out the rest of the shed plans here and other animals plans here.
Top Tip: If you want to enhance the look of the project and to protect the components from decay, we recommend you to apply paint or stain.
This woodworking project was about free 8×10 goat shelter plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.