Home 5x10 A Frame Chicken Coop Plans

A Frame Chicken Coop Plans

by Ovidiu

 

This step by step woodworking project is about a-frame chicken coop plans free. If growing chickens in free range is not an option to you, either because of the predators or because you have a small backyard, a small chicken coop is the solution to your needs. Even amateur builders can get the job done in just a weekend, if the right plans and carpentry techniques are used. Adjust the size of the chicken coop to your needs and follow the step by step instructions.

We recommend you to buy weather-resistant lumber designed for outdoor use, such as cedar, pine or pressure treated. Make sure the wooden boards are perfectly straight and in a good condition (check for twists, rot or wane). Pre-drill the lumber before inserting the screws, to protect the wood from splitting. Align the components at both ends, before securing them into place, if you want to obtain a symmetrical look. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

Cut & Shopping Lists

  • A – 2 pieces of 2×4 lumber 120” long, 2 pieces – 117 3/4″ long BRACES
  • B – 9 pieces of 2×4 lumber 60” long – cut at 60º at both ends RAFTERS 
  • C – 2 pieces of 2×4 lumber 117 3/4” long TOP RIDGES
  • C – 1 piece of 3/4″ plywood – 48 1/2″x56″ long, 1 piece – 28 3/4″x57 3/4″ long FLOOR & BACK
  • D – 2 pieces of 3/8” plywood 25×60 3/4”, 4 pieces of 1×3 25”, 4 pieces of 1×3 56 1/4” DOORS
  • E – 40 ft of 30” wide chicken wire CHICKEN WIRE
  • F – 15 fr of 2×2 lumber LADDER
  • G – 6 pieces of 2×4 lumber 32 3/4” long – cut at 60º SUPPORTS

Tools

 Hammer, Tape measure, Framing square

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One weekend

 

 

Simple chicken coop plans

Simple-chicken-coop-plans

Simple-chicken-coop-plans

 

Building an a-frame chicken coop is a straight forward project, if you use the right plans and woodworking techniques. There are many designs and shapes to choose from, but this project is about a simple structure that can be built in just an weekend.

Top Tip: Adjust the size of the chicken coop in order to fit your needs and tastes. Work with great care and judgement, making sure all the components are perfectly aligned.

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

A frame chicken coop plans

Building the base of the frames

Building the base of the frames

Build the base for the frames out of 2×4 lumber.

Assembling-the-frames

Assembling-the-frames

Build the rest of the components for the frames and secure them to the base using 2 1/2″ screws. Add glue to the joints and remove the excess with a damp cloth.

Building-the-frame-of-the-coop

Building-the-frame-of-the-coop

The first step of the project is to build the three A-shapes frames of the chicken coop. Therefore, cut the components from 2×4 lumber, using a good miter saw with a sharp blade. As you can see in the image, you have to cut the ends of the components at 60º, as to obtain a large structure.

Top Tip: Drill pilot holes in the lumber, before inserting the 2 1/2” wood screws, to prevent the lumber from splitting.

Building the end panel

Building the end panel

Build the end panel from 3/4″ plywood. If you want to have an easy access to the chicken run, you can cut this panel in half horizontally and use hinges to create a door. In this manner, you can take out the chickens easily, without lifting the whole chicken coop.

Attaching the bottom end

Attaching the bottom end

Continue the project by securing the A frames with lateral braces. Cut several 2×4 lumber at the right size and lock them into place, after fitting the chicken coop wire. Afterwards, secure the wise to the structure with 3/4” staples, every 2” along the braces and frame.

Top Tip: Build the back of the chicken coop from 3/4 plywood and lock it into place with 2” nails. Add glue to enhance the bond of the panel to the structure.

Fitting the side supports

Fitting the side supports

Make sure you align the braces properly. Check if the A-frames are plumb before attaching the braces.

A frame chicke coop handles

A frame chicken coop handles

On the other hand, you can cut the middle braces longer, so you can use them as handles when moving the chicken coop from one location to another. 12-16″ on each side of the chicken coop is enough to create nice handles. Smooth the edges with attention.

Building the upstairs room

Building the upstairs room

Afterwards, build the upstairs room supports from 2×4 lumber and secure them to the side braces of the chicken coop with screws. Cut the ends of the supports at 60º, with a miter saw. Align the components at both ends, drill pilot holes and insert the 2 1/2” screws, from the exterior.

Top Tip: Cut a piece of 3/4” plywood an place it on the supports. Next, secure it tightly by driving in 1 1/4” nails into the 2×4 supports.

Installing the coop's door

Installing the coop’s door

After you have built the nest area, you have to make the doors of the chicken coop an install it into place. We have build doors for the nest area, but you could also add another pair on the right side, to have a better access  to the rest of the sections.

Top Tip: Use 3/4” plywood to build the doors of the chicken coop, as well as 1×3 trims. Work with great care, making sure the cuts are accurate.

Installing-the-coop-door

Installing-the-coop-door

Fit the doors into place and lock them tightly to the frame with several hinges and a simple latch. Proceed in the same manner for the rest of the doors, making sure they fit inside the openings and work properly.

Top Tip: Finish the A-shaped chicken coop by installing wire to the front end, as well as the 1×3 trims. Secure the trims into place with 2” nails, after making sure they are properly aligned.

Chicken coop ladder plans

Chicken coop ladder plans

The next step of the woodworking project is to build a small-scale ladder, to provide a better access for the chickens to the upstairs room. In order to get the job done quickly, use 2×2 lumber and 2 1/2” screws.

Cut the components with a miter saw and lay them on a level surface. Align the wooden elements properly, pre-drill the lumber and insert the wood screws. You should adjust the size of the ladder, as to fit your needs.

A frame checken plans

A frame chicken plans

Last but not lest, you have to take care of the finishing touches. Therefore, fill the holes with a good wood putty and let the compound to dry out properly. Afterwards, sand the wooden surface with medium-grit sandpaper and clean the residues with a vacuum.

Top Tip: Protect the a frame chicken coop by applying several coats of  stain or paint. Attach handles to move the construction easily.

 

 

This woodworking project is about a frame chicken coop plans. If you want to see more outdoor plans free, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook to be the first that gets our latest updates and submit pictures with your DIY projects.

 

 

EXPLORE MORE IDEAS FOR:

You may also like

22 comments

Jonathan -

There are so many things wrong with these plans. The instructions are incredibly vague and misleading. The angles cut into the support beams are definitely not 60°, figuring the correct angle out as we speak. I am glad that I did not cut all of my support beams at 60 degrees or I would be heading back to the store to buy more wood. The supply list does not include many essentials like the floor piece of plywood for the nesting area, the plywood that covers the back of the coop, or hinges. I have made several trips back and forth to the store to get things that were left out of the supply list. If your goal was to make an easy design plan for a beginner to follow, you missed the mark.

Reply
Julian -

If you are so knowledgeable regarding angles and so forth, there is no need to follow these plans. So many options on the internet, even for beginners. If your goal was to leave a mean comment, you succeeded. Good luck!

Reply
Jonathan -

Julian, I am sorry, I should not have commented while my hands were still dirty and my mind twisted with frustration. The chicken coop is coming out very well, I appreciate these plans. I guess in reality all projects take some adjusting here and there.
Some constructive criticism if I may: the support beams (G) should be cut at 30 degrees to get a snug fit. To be sure how long to cut beams, measure the bottom of the two middle braces (A) and cut supports accordingly (since the placement of the braces is somewhat eyeballed). The 9 pieces of wood that make up the rafters (A) fit just fine when cut at 60 degrees on both ends.
Thanks for your time.

Reply
Julian -

It’s ok, Jonathan. I understand your mixed feelings and I have over-reacted a little. For a beginner, these particular plans were too vague so I took this opportunity and made everything more clear. These were among the first plans I have created for this site. It’s a learning curve so I think things look now a lot better. I am glad to hear your project is looking good so far, thank you for your input and I am looking forward to seeing the end result of your work. Good luck!

Reply
sharun smith -

Looks good. I think I ll try it

Reply
Julian -

Good luck with the project!

Reply
Sean -

In your experience, how water tight is this coop? I’m thinking about using these plans to build a coop for 4 chickens in which case I think I would need to build the house across the entire upper level.
Did you install a nesting box or a roost inside?
Sorry for the random questions but I’m trying to build a budget coop and my chicken raising knowledge before the end of the month when my local store gets their chicks in.
Thanks!

Reply
Julian -

This design isn’t waterproof and doesn’t have a nesting box. I recommend you this design: http://myoutdoorplans.com/animals/free-chicken-coop-plans/

Reply
Rosemary -

Thank you for taking the time to post this particular plan. It gives me the basics to work from in adapting my own ideas, needs, and sizing, into this A frame coop.
Anyone that can use a saw and an electric drill (with a buddy to help) could put this together in a weekend.

Reply
Julian -

Good luck with the project.

Reply
Flora -

If you were to put a nesting box on the upper floor of the coop, how would you suggest incorporating it?

Reply
Jack -

I wouldn’t. I would build a larger coop; something like this: http://myoutdoorplans.com/animals/4×8-chicken-coop-plans/

Reply
Jarom -

This is my next project. Starting tomorrow. Will be for meat birds, 25 at a time. I will be expanding to 12’ long and 8’ wide by 7’ high and adding a door to the outside frame. I will also be covering the entire top with plywood, using 1/4 for weight and painting for weather. Since we live in PNW, we see a lot of rain and then some very sunny hot days so a covered area is perfect and the nesting area is perfect since they only get to 8 weeks no need for laying boxes. Back side will have hinges and split so access to nesting area for cleanout is easier.

I previously built the Large coop using the plans on this site and it was a good learning project for my first time.

What I learned? Pay attention to the finishing details, use all the nails and screws needed to fully attach things. Get a miter saw that can do cuts bigger than 45 degrees, maybe a laser-guide. Use wood glue. Add extras for longevity (we wrapped the entire structure with tar paper and added linoleum flooring. Added a feeder and watering system as well as power.

Reply
Ovidiu -

Great tips! Looking forward to seeing your future projects!

Reply
Dawn -

Confused as to what the ‘1×3 25”’ and ‘1×3 56 1/4”’ means. I am not used to this setting out of imperial measurements.

Thanks for these instructions.

Reply
Ovidiu -

It means that you need to use 1×3 lumber and cut it at 25″ and 56 1/4″

Reply
Dawn -

Thank you so much!

Reply
Cheryl -

This seems like a solid and basic plan for a chicken tractor. I’m going to adapt it to ducks, but I think this will be a great option to keep the neighbor’s and my own cats from thinking the ducks are for them. Thanks for posting!

Reply
Ovidiu -

You’re welcome. Let me know how the duck coop comes out.

Reply
Freddie -

How many chickens would this design (as written) accommodate?

Reply
Ovidiu -

10 chickens

Reply
Kelly -

Do I need nesting boxes?

Reply

Leave a Reply to Ovidiu Cancel Reply