Vertical Corner Planter Plans

This step by step diy woodworking project is about vertical corner planter plans. This detailed article features instructions and complete diagrams about building a rustic plant stand. This project requires basic tools and materials, so that any person with basic skills can get the job done in less than a week. You can use reclaimed wood to build the components, making sure the slats are still in a good condition.

Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from. Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs within the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. See all my Premium Plans HERE.

Projects made from these plans

Vertical corner planter plans

Building a corner planter

Cut & Shopping Lists

• A – 2 pieces of 2×4 lumber – 48″ long POSTS
• B – 8 pieces of 1×3 lumber – 18 1/4″ long BACK
• C – 8 piece of 1×1 lumber – 3 1/2″ long CLEATS
• D – 1 piece of 1×4 lumber – 14 1/2″ long, 1 piece – 11″ long, 1 piece – 7 1/2″ long, 1 piece – 4 1/4″ long SHELVES

• 1 piece of 2×4 lumber – 8 ft
• 2 pieces of 1×3 lumber -8 ft
• 1 piece of 1×1 lumber – 3 ft
• 1 piece of 1×4 lumber – 8 ft
• 2 1/2″ screws
• 1 1/4″ screws
• wood putty, wood stain

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Plant stand plans
• Free plant stand plans

Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. 

How to build a vertical planter

Building the supports

The first step of the project is to build the vertical supports of the planter. Use 2×4 lumber, making sure the components are perfectly straight and in a good condition.

Cutting the top of the supports

Use a saw to make the cuts to the top of the vertical supports. Smooth the edges with fine-grit sandpaper and remove the residues with a damp cloth.

Attaching the back slats

Lay 1×6 boards on a level surface and attach the legs into place. Mark the contour of the A-frame planter and make the cuts with a circular saw. Use brad nails and glue to lock the slats to the back of the vertical planter.

Fitting the cleats

Next, you need to attach 1×1 cleats to the planter, as shown in the diagram. Drill pilot holes and secure the cleats into place with 1 1/4″ screws and glue. Cut the cleats at 3 1/2″ lumber. Lean the cleats at 45 degrees. Taking into account this is a project with a rustic appearance, the joints don’t have to be perfect.

Building the shelves

Build the planters out of 1×4 slats. Cut the components at the right size using a circular saw, by following the instructions described in the diagram.

Fitting the shelves

Drill pilot holes through the boards and insert 1 1/4″ screws into the side cleats, to lock them into place.

Vertical corner planter plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the project and to protect the wooden garden swing stand from decay, we recommend you to cover the components with paint or stain.

This woodworking project was about vertical corner planter plans free. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

- EXPLORE MORE IDEAS FOR -