Closet Storage Plans

This step by step diy woodworking project is about closet storage plans. If you want to learn more about building a medium-sized closet organizer with a classy look, we recommend you to take a look over the instructions described in the article. Work with good judgement and don’t forget to take a look over the rest of the related plans, as there are many designs and woodworking projects to select from.

Work with attention and don’t forget that a good planning will save you from many issues and it will keep the costs withing the total budget. Invest in high quality materials, such as pine, redwood or cedar. Drill pocket holes before inserting the galvanized screws, to prevent the wood from splitting. Add waterproof glue t the joints, in order to enhance the rigidity of the structure. See all my Premium Plans HERE.

Projects made from these plans

Closet Storage Plans

Building a closet organizer

Cut & Shopping Lists

• A – 2 pieces of 1×12 lumber – 47 1/4″ long SIDES
• B – 4 pieces of 1×12 lumber – 22 1/2″ long, 1 piece – 24″ long SHELVES
• C – 3 pieces of 1×12 lumber – 11 1/4″ long PARTITIONS
• D – 2 pieces of 3/4″ plywood – 4 3/4″ x 9 1/2″ long, 2 pieces – 4 3/4″ x 22 1/4″ long, 1 piece – 9 1/2″ x 20 3/4″ long 2xDRAWERS
• E – 1 piece of 1/4″ plywood – 24″ x 48″ long BACK

• 3 pieces of 1×12 lumber – 8 ft
• 1 piece of 3/4″ plywood – 4’x4′
• 1 piece of 1/2″ plywood – 2’x4′
• 2 1/2″ screws
• 1 1/4″ screws
• wood putty, wood stain

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Nightstand Plans

Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. 

Building a closet organizer

Building the frame of the closet organizer

The first step  is to build the frame of the closet organizer. As you can easily notice in the diagram, we recommend you to build the components out of 1×12 lumber. Cut the components at the right size and smooth the edges.

Drill pocket holes at both ends of the bottom component and at the top of the side components. Check if the corners are square before fitting the 1 1/4″ screws. Add glue to the joints.

Fitting the shelves

Continue the project by fitting the shelves and the partitions for the drawers. Drill pocket holes at both ends of the 1×12 components and fit them inside the frame.

Use a spirit level to check if the shelves are horizontal and secure them to the frame using 1 1/4″ screws. Make sure the corners are square and add glue to the joints.

Fitting the partitions

The next step of the project is to fit the 1×12 partitions to the frame of the closet. Drill pocket holes at both ends of the partitions and center them to the structure. Make sure the corners are square and insert 1 1/4″ screws to create a rigid bond.

Attaching the back

Continue the project is to attach the 1/4″ plywood back to the frame of the closet organizer. Cut the component at the right dimensions and secure it to the back using finishing nails. Make sure the corners are square before inserting the nails and add glue for a better bond.

Building the drawers

Building the drawers is a straight forward process. Build the components out of 3/4″ plywood and take accurate measurements for a professional result. Drill pocket holes at both ends of the side components and insert 1 1/4″ screws into the perpendicular slats. Drill pocket holes along the bottom of the drawer and secure it to the frame using 1 1/4″ screws. Add glue to the joints.

Building the front face

In order to open and close the drawers easily you can attach handles out cut out the front face, as in the diagram. Smooth the edges with attention and remove the residues with a damp cloth.

Fitting the drawers

Wax the bottom of the drawers and fit them inside the openings. Make sure there is a 1/8″ gap around the drawers and align the faces with the frame of the closet organizer.

Closet storage plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

Top Tip: If you want to enhance the look of the woodworking project and to protect the cabinet from decay, we recommend you to cover the components with paint or stain. Place the closet organizer in a proper location and move it whenever necessary.

This woodworking project was about closet storage plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

- EXPLORE MORE IDEAS FOR -