2x6 Firewood Shed Plans - Part 2

This step by step diy project is about 2×6 1/2 cord firewood shed roof plans. This is PART 2 of the small firewood shed project, where I show you how to build lean to roof and how to attach the side wall panels. See the rest of my firewood shed free plans HERE. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.

Projects made from these plans

2×6 Firewood Shed Plans – Part 2

Building-a-2×6-firewood-shed

Cut & Shopping Lists

F – 7 pieces of 2×4 lumber – 34″ long RAFTERS
G – 2 pieces of 1×4 lumber – 7 ft TRIMS
H – 3 pieces of 1×4 lumber – 7 ft PURLINS
I – 30 sq ft metal roofing ROOFING

Tools

Hammer, Tape measure, Framing square, Level

Miter saw, Drill machinery, Screwdriver, Sander

Safety Gloves, Safety Glasses

Time

One day

Firewood Shed Plans

[/tab][/tabs]

How to build a 4×6 wood shed roof

Rafters-for-2×6-wood-shed

Use 2×4 lumber for the rafters. Mark the cut lines on the beams and then get the job done with a circular saw. Smooth the edges flush. You need the birdsmouth cuts to lock the rafters into place easily.

Fitting-the-rafters-to-the-wood-shed

Fit the rafters to the support beams. Place the supports every 16″ on center. Use rafter ties and 1 1/2″ structural screws to secure the rafters into place tightly.

Fitting the roof trims

Attach the 1×4 trims to the front and to the back of the shed roof. Align the edges flush, drill pilot holes and insert 1 5/8″ screws, to lock them into place tightly.

Fitting the purlins

Fit the 1×4 purlins to the top of the shed. Drill pilot holes and insert 1 5/8″ screws to lock them into place tightly. Use 2 screws for each joint.

Fitting the roofing

Next, attach the metal roof sheets to the top of the firewood shed. Align the edges and secure the sheets to the purlins with 3/4″ roofing screws, or the size recommended for the roofing sheets you get.

How-to-build-a-2-cord-wood-shed

You should also check out my 3 cord firewood shed plans. I have many design ideas on this blog, so make sure you take a look over all the alternatives before taking a decision. Premium Plans for this project available in the Shop.

This woodworking project was about 1×6 1/2 cord wood shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.