Home Shed 4×16 Lean to Shed Roof Plans

4×16 Lean to Shed Roof Plans

by Ovidiu
1.4K views 5 minutes read

 

This step by step diy project is about 4×16 lean to shed roof plans. This is PART 2 of the free 4×16 shed plans, where I show you how to build the lean to roof and the front double 4′ doors. In addition, I show you how to add decorative trims to the shed. The pitch of the roof is 6/12. Make sure you check the local codes and make adjustments to the plans, if required. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

4×16 Lean to Shed Roof Plans

Building-a-4x16-shed

Building-a-4×16-shed

 

Cut & Shopping Lists

  • G – 2 pieces of  T1-11 siding – 26 1/2″x48″ long SIDING
  • H – 13 pieces of 2×4 lumber – 65 3/4″ long RAFTERS
  • I – 2 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces x 17 3/4″x48″ long, 1 piece – 17 3/4″x96″ long ROOF
  • J – 2 pieces of 2×6 lumber – 196 1/4″ long, 2 pieces – 66 1/2″ long TRIMS
  • K – 120 sq ft of tar paper, 120 sq ft of asphalt shingles ROOFING
  • L – 4 pieces of 1×4 lumber – 81 1/2″ long, 2 pieces – 55″ long JAMBS
  • M – 2 pieces of 1×4 lumber – 24″ long, 1 piece – 17″ long, 2 pieces – 70 3/4″ long, 1 piece of T1-11 siding – 24″x77 3/4″ long 4xDOOR
  • N – 2 pieces of 1×4 lumber – 112 1/2″ long, 2 pieces – 111 3/4″ long, 2 pieces – 186 1/4″ long, 2 pieces – 43″ long, 2 pieces – 89″ long, 2 pieces – 87 3/4″ long, 2 pieces – 18 1/2″ long, 1 piece – 41″ long TRIMS

  • 3 pieces of 5/8″ T1-11 – 4’x8′
  • 13 pieces of 2×4 lumber – 8′
  • 3 pieces of 3/4″ plywood – 4’x8′
  • 2 pieces of 2×6 lumber – 6′
  • 18 pieces of 1×6 lumber – 18′
  • 24 pieces of 1×6 lumber – 8′
  • 4 pieces of 1×4 lumber – 10′
  • 2 pieces of 1×4 lumber – 16′
  • 120 sq ft of tar paper, 120 sq ft of asphalt shingles
  • shed hinges + latch
  • 6d nails, 2 1/2″ screws, 3 1/2″ screws
  • wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related

 

 

Building a 4×16 lean to shed roof

Building-the-rafters

Building-the-rafters

First of all, you need to build the rafters for the lean to shed. Mark the cut lines on the 2×4 boards and then get the job done with a circular saw. Smooth the edges with sandpaper.

Fitting the rafters

Fitting the rafters

Fit the rafters to the top of the shed, every 16″ on center. Align the edges with attention and use rafter ties to lock them into place tightly.

Lean to panels

Lean to panels

Fit the panels to the lean to ends. Align the edges and insert 2″ nails, every 8″ along the framing.

Fitting the roof sheets

Fitting the roof sheets

Fit the 3/4″ plywood sheets to the top of the shed. Align the sheets with attention and leave no gaps between them. Insert 1 5/8″ screws, every 8″ along the framing.

Roof trims

Roof trims

Fit 2×6 trims to the sides of the roof and 1×6 trims to the front and back. Use 2 1/2″ screws to lock the trims into place tightly.

Fitting the roofing

Fitting the roofing

Cover the roof with tar paper and then install the asphalt shingles. Make sure you also install the appropriate drip edges, so you can seal the shed roof. Read the manufacturer’s instructions for a tight fit.

Fitting the door jambs

Fitting the door jambs

Fit 1×4 jambs around the opening. Align the edges with attention and insert 2″ nails, every 8″ along the framing.

Building-the-doors

Building-the-doors

Build the door panel  from T1-11 siding and the trims from 1×4 lumber. Use 1 1/4″ screws to lock the panels to the trims. Add glue to the joints and align the edges flush.

Fitting the doors

Fitting the doors

Fit the doors to the openings and align the edges with attention. Use hinges to lock the doors to the jambs. Install a latch to lock the doors tightly.

Back wall trims

Back wall trims

Fit 1×4 trims to the back of the shed. Align the edges with attention and insert 2″ nails, every 8″ along the framing, so you can secure them into place tightly.

Side wall trims

Side wall trims

Fit the 1×4 trims to the sides of the shed, as well.

Front wall trims

Front wall trims

Last but not least, fit the 1×4 trims to the front of the shed. Align the edges with attention and insert 2″ nails to lock them into place tightly.

4x16 shed plans - front view

4×16 shed plans – front view

As you can see in the diagrams, this narrow shed comes with a lot of storage space so you can get the job done super easily. The two pair of doors make it ideal for an easy access. You can add a partition to the shed, as well.

4x16 shed plans - back view

4×16 shed plans – back view

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. Moreover, check out PART 1 of the shed, so you learn how to build the frame of the shed.

 

 

This woodworking project was about 4×16 lean to shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Previous

 

 

- EXPLORE MORE IDEAS FOR -

You may also like

Leave a Comment