12×8 Shed Roof Plans

This step by step diy project is about 12×8 shed roof plans. This is PART 2 of the storage shed project, where I show you how to build the gable roof. I show you step by step with diagrams and instructions, everything you need to know about building the gable roof. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

12×8 Shed Roof Plans

Building-a-12×8-shed

Cut & Shopping Lists

• G – 4 pieces of T1-11 siding – 48″x31 3/4″ long, 2 pieces – 24″x45 1/2″ long SIDING
• H – 2 pieces of 2×4 lumber – 96″ long, 1 piece – 144″ long 5xTRUSS
• I – 4 pieces of 2×4 lumber – 25 1/4″ long, 2 pieces – 38″ long SUPPORTS
• J – 4 pieces of 3/4″ plywood – 46″x96″ long ROOF SHEETS
• K – 4 pieces of 2×6 lumber – 97 1/4″ long, 2 pieces of 1×6 lumber – 97 1/4″ long TRIMS
• J – 150 sq ft of tar paper, 150 sq ft of asphalt shingles ROOFING

• 12 pieces of 2×4 lumber – 8′
• 5 pieces of 2×4 lumber – 12′
• 1 piece 1/2″ plywood – 4’x8′
• 4 pieces of 3/4″ plywood – 4’x8′
• 2 pieces of 1×6 lumber – 10′
• 2 pieces of 2×6 lumber – 10′
• 3 pieces of T1-11 5/8″ siding – 4’x8′
• 160 sq ft of tar paper, 160 sq ft of asphalt shingles
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 4d nails, 16d nails, 6d nails
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 12×8 Shed Plans 
• PART 2: 12×8 Shed Roof Plans
• PART 3: Double Shed Doors Plans

Make sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. 

12×8 Shed Roof Plans

Building-the-trusses—shed

Start the woodworking project by assembling the trusses for the shed. As you can easily notice in the diagram, you need to cut the rafters from 2×4 lumber. Cut both ends of the rafters at the right angle and then lay them on a level surface. Align the edges with attention and leave no gaps between the components.

Gussets

Use 1/2″ plywood for the gussets. Mark the cut lines on the sheet and then get the job done with a circular saw. Fit the gussets over the joints, align the edges with attention and insert 1 5/8″ screws.

Fitting-the-shed-trusses

Fit the trusses to the top of the shed. Place the trusses every 24″ on center, as shown in the diagram. Use a spirit level to plumb the trusses and then lock them into place with rafter ties. If you want to seal the shed, you could fit 1×4 blockings to the sides of the shed, between the trusses. Drill pocket holes at both ends of the blockings and insert 1 1/4″ screws to lock them into place tightly.

Gable end supports

Use 2×4 lumber for the gable end supports. Cut the supports at the right size and angled and then drill pocket holes at both ends. Secure the supports into place with 2 1/2″ screws.

Gable end panels

Cut the panels for the gable ends from T1-11 siding. Attach the panels to the front and back of the shed. Align the edges flush and insert 6-8d nails every 8″ along the framing.

Roof sheets

Fit the 3/4″ plywood to the roof of the shed. Align the edges with attention and then insert the 1 5/8″screws, every 8″ along the rafters.

Fitting the roof trims

Fit 2×6 overhangs to the front and to the back of the shed. Align the edges with attention and then drill pilot holes. Insert 2 1/2′ screws to secure the beams into place tightly.

Side roof trims

Fit the 1×6 trims to the sides of the roof. Align the edges and insert 2″ brad nails so you can lock the trims to the end of the rafters.

Fitting the roofing

Cover the roof of the shed with roofing felt, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. In addition, cut a large piece for the top ridge. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under.

Read the instructions labeled on the asphalt shingle packs before installing them into place tightly. Start with the bottom left side of the roof and install them all the way to the top.

12×8 Shed Plans – Back view

In PART 3 of the project I show you how to attach the 1×4 trims to the exterior of the shed, besides framing the front double doors.

12×8 Shed Plans – Front View

You need to check out PART 3 of the shed, so you learn how to build the double doors and how to fit the rest of the trims. If you have’t looked over PART 1 yet, I recommend you to do it, as it will show everything you want to know about building the frame of the shed.

This woodworking project was about 12×8 shed roof plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -