Home 6x6 6×6 Lean to Shed Plans

6×6 Lean to Shed Plans

by Ovidiu

 

This step by step diy project is about 6×6 lean to shed shed plans. This lean to shed is small so you can build it on almost any property. The shed features a large 4′ front door and a lean to roof, so it drains the water to the back of the construction. Make sure you check the local codes and make adjustments to the plans, if required. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Roof pitch for this shed is 2:12.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. See all my Premium Plans HERE.

 

 

Projects made from these plans

Add-image

 

 

6×6 Lean to Shed Plans

Building-a-6x6-lean-to-shed

Building-a-6×6-lean-to-shed

 

Cut List

  • A – 3 pieces of 4×4 lumber – 72″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 72″ long, 6 pieces – 69″long FLOOR
  • C – 1 piece  of 3/4″ plywood – 48″x72″ long, 1 piece – 24″x72″ long FLOORING
  • D – 2 pieces of 2×4 lumber – 12″ long, 1 piece – 72″ long, 6 piece – 77″ long, 2 pieces – 73 1/2″ long, 2 pieces – 51″ long FRONT WALL
  • E – 2 pieces of 2×4 lumber – 72″ long, 8 pieces – 65″ long BACK WALL
  • F – 2 pieces of 2×4 lumber – 65″ long, 6 pieces – 65″ long 2xSIDE WALL
  • G – 2 pieces of T1-11 siding – 36″x83 3/4″ long, 3 pieces – 24″x71 3/4″ long, 3 pieces – 48″x71 3/4″ long EXTERIOR WALLS

Shopping List

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One week

Related:

 

 

How to build a 6×6 lean to shed

Building-a-floor-shed-frame

Building-a-floor-shed-frame

The first step of the lean to shed project is to build the frame of the floor. Cut the joists from 2×6 lumber at the right dimensions. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Make sure the corners are square and align the edges flush.

Fitting the skids

Fitting the skids

Select the location for the shed and level the surface thoroughly. Fit the 4×4 skids and the attach the floor frame on top. Use rafter ties to lock the skids to the frame.

Floor sheets

Floor sheets

Fit the 3/4″ plywood sheets to the floor frame of the shed. Cut the sheets and then align the edges with attention. Drill pilot holes through the sheets and insert 1 5/8″ screws, every 8″ along the framing.

 

Building the shed wall frames

Front-wall-frame

Front-wall-frame

Use 2×4 lumber for the front wall frame. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and align the edges flush. Build a double header for the door from 2×4 lumber and 1/2″ plywood. You can adjust the size of the door opening to suit your needs.

Back-wall-frame

Back-wall-frame

Build the frame for the back wall from 2×4 lumber. Cut the components from 2×4 lumber at the right dimensions. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and place the studs every 16″ on center.

Side-wall-frames---6x6-shed

Side-wall-frames—6×6-shed

Use 2×4 lumber for the side wall frames. Drill pilot holes through the plates and insert 3 1/2″ screws to lock everything together tightly. Make sure the corners are square and align the edges flush.

Assembling the shed frame

Assembling the shed frame

Fit the wall frames to the floor of the shed. Align the edges with attention, plumb the walls vertically, drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Moreover, you need to lock the adjacent walls together tightly with 2 1/2″ screws. Make sure the corners are square and align the edges flush.

 

Fitting the siding sheets

Side panels

Side panels

Fit T1-11 siding sheets to the sides of the shed. Cut the sheets at the right dimensions and then align the edges flush. Insert 6-8d nails, every 8″ along the framing.

Front wall panels

Front wall panels

Fit the T1-11 siding panels to the front of the shed. Make cuts to the sheets so you can fit them around the opening with attention. Insert 6-8d nails, every 8″ along the framing.

Back wall panels

Back wall panels

Fit the siding sheets to the sides of the shed, as well. Align the edges and leave no gaps between them. Insert 6-8d nails every 8″ along the framing, so you can secure the sheets into place tightly.

6x6 Lean to Shed Plans

6×6 Lean to Shed Plans

 

6x6 Lean to Shed - overall dimensions

6×6 Lean to Shed – overall dimensions

I have lots of other shed projects on the site so I recommend you to browse through all alternatives before starting the building project. See all my shed projects HERE. Moreover, check out PART 2 of the shed, so you learn how to build the roof and the front door.

If you want to get this project as a PDF file with 1 full Cut list and 1 full Shopping list, please take a look over the GET PDF PLANS button bellow.

 

 

This woodworking project was about 6×6 lean to shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

6 comments

Monique -

Hi There,

It doesnt look like the roof for this 6×6 Leanto shed is linked in the “Next” button. That roof is for a gabled roof? Would it be possible to get the plans for the lean to roof?

Thanks a lot.

Reply
Ovidiu -

I have updated the links. Thank you for letting me know.

Reply
Monique -

Awesome, thanks a lot! I will upload photos of my finished project!

Reply
Ovidiu -

Perfect. Looking forward to that!

Reply
Victor -

I like this plan but I want one the same size with the door on the other side. Since the door side is higher I do not know what to do. I am not a builder but I am planning on showing this plan to someone to build this on the end of my house.

Reply
Joseph Ventimiglio -

Do you have plans for an 8 x 6 lean to shed?

Reply

Leave a Reply to Ovidiu Cancel Reply