Home 6x10 6×10 Lean to Shed Plans

6×10 Lean to Shed Plans

by Ovidiu

 

This step by step diy project is about 6×10 storage shed plans. I have designed this small shed with a lean to roof, so you can store all your garden tools in one place. This shed features double front doors for an easy access. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

 

 

Projects made from these plans

  Add-image

 

 

6×10 Lean to Shed Plans

How-to-build-a-6x10-lean-to-shed

How-to-build-a-6×10-lean-to-shed

 

Cut & Shopping Lists

  • A – 2 pieces of 4×4 lumber – 120″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 120″ long, 8 pieces – 69″ long FLOOR FRAME
  • C – 2 piece of 3/4″ plywood – 48″x72″ long, 1 piece – 24″x72″ long FLOOR
  • D – 2 pieces of 2×4 lumber – 120″ long, 1 piece – 113″ long, 11 pieces – 75 1/2″ long BACK WALL
  • D – 2 pieces of 2×4 lumber – 120″ long, 11 pieces – 19 1/2″ long BACK WALL
  • E – 2 pieces of 2×4 lumber – 65″ long, 1 piece – 72″ long, 6 pieces – 75 1/2″ long 2xSIDE WALL
  • F – 2 pieces of 2×4 lumber – 24″ long, 1 piece – 120″ long, 1 piece – 113″ long, 2 pieces – 75″ long, 8 pieces – 75 1/2″ long, 2 pieces – 72″ long FRONT WALL

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One weekend

Related

 

 

Trim---Facebook-BoxMake sure you follow me on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! Check out our YouTube channel! See how you can Support  Me with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a 6×10 lean to storage shed

Assembling the floor frame

Assembling the floor frame

The first step of the project is to build the floor frame for the shed. You can use 2×6 lumber or even 2×4 lumber if you are not going to store heavy items. Cut the components at the right dimensions and then drill pilot holes through the rim joists. Insert 3 1/2″ screws to lock the joists together. Align the edges flush and make sure the corners are square.

Fitting the skids

Fitting the skids

The next step if to attach 4×4 skids to the floor frame. The wood skids will lift the floor frame from the ground for a few inches and thus, protect it from the elements. Attach the skids to the floor frame using metal connectors or by inserting screws through the frame into the skids.

Fitting the floor sheets

Fitting the floor sheets

Lay the 3/4″ plywood sheets to the floor frame. Cut the sheets at the right dimensions, as shown in the plans. Align the edges flush, leave no gaps between the components and then insert 1 5/8″ screws to lock them into place tightly.

 

Building the shed wall frames

Side-wall-frames

Side-wall-frames

Continue the project by assembling the side walls. Cut the plates and the studs from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws or 16d nails into the studs. Place the studs every 16″. Make sure the edges are flush and check if the corners are square for a neat result.

Front-wall-frame

Front-wall-frame

Assemble the front wall for the 6×10 storage shed using the above instructions. Make sure you leave enough space for the door opening. You can make adjustments to suit your needs. Check if the corners are square and align the edges with attention.

Back-wall-frame

Back-wall-frame

Build the back wall for the shed. Cut the components at the right dimensions and then assemble the wall frame together using 3 1/2″ screws or 16d nails.

Assembling the frame of the shed

Assembling the frame of the shed

Fit the walls to the floor frame of the storage shed and align the edges flush. Use a spirit level to plumb the walls and drill pilot holes through the bottom plates. Insert 3 1/2″ screws into the floor of the shed for a neat result. In addition, lock the adjacent walls together using 2 1/2″ screws.

Top back wall frame

Top back wall frame

Use 2×4 lumber for the top back walls. Cut the components at the dimensions shown in the diagram. Drill pilot holes and insert 3 1/2″ screws through the plates into the studs. Place the studs every 16″ on center and make sure the corners are square.

Fitting the top back wall frame

Fitting the top back wall frame

Fit the frame to the top of the back wall. Align the edges with attention, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly. Use a spirit level to plumb the wall frame.

 

Finishing touches

Building a 6x10 lean to shed

Building a 6×10 lean to shed

Check out the rest of the plan, so you learn how to build the door and the roof for the 6×10 lean to shed.

6x10 Lean to Shed Plans

6×10 Lean to Shed Plans

Last but not least, you need to take care of the finishing touches. Therefore, fill the holes with wood putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain so you enhance the look of the shed and you protect the components from decay. Don’t forget to take a look over PART 2 to learn how to build the roof for the shed, as well as PART 3 to see how to frame the front door.

If you want to get this project as a PDF file, with 1 full Cut list and 1 full Shopping list, please take a look over the GET PDF PLANS button bellow.

 

 

This woodworking project was about 6×10 shed plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

10 comments

Denise -

Help! I can’t find PART 2 to learn how to build the roof for the shed, as well as how to frame the front door.

For the 6X10 lean to Shed

Can you email them to me? I printed out the Part 1 for my husband – he loves it but asked me where Part 2 was.

Thanks, Denise

Reply
Ovidiu -

I have just published PART 2 here: http://myoutdoorplans.com/shed/6×10-lean-to-shed-roof-plans/ PART 3 will go live tomorrow.

Reply
Tracy -

In the lumber list it says to get 7 – 2 X 6 X 12. Where are they used? For the floor framing?

Reply
Ovidiu -

Yes, for the joists.

Reply
Riki Ler -

Is it preferable to use screws as opposed to nails on the floor joists?

Reply
Ovidiu -

Yes. 3 1/2″

Reply
Aimee -

Is there plans with the door on the side?

Reply
Ovidiu -

No. Sorry

Reply
Jim -

Did you ever create the plans for part 3 – the doors?

Reply
Ovidiu -

Click on the NEXT button at the end of the article and see for yourself

Reply

Leave a Reply to Denise Cancel Reply