Home 8x10 10×8 Gable Shed Plans

10×8 Gable Shed Plans

by Ovidiu

 

This step by step project is about 10×8 gable shed plans. I have designed this compact storage shed with double front doors, so you can shelter your tools and other items in a good order. This shed is sturdy and easy to build. Take a look over the local building codes before starting the project, as you need to comply with the legal requirements and in some cases even get a permit.

There are several aspects that any person should take into account before starting the woodworking project. First of all, you need to use weather-resistant lumber, such as cedar, pine or redwood. Drill pocket holes at both ends of the components, if you want to lock them together tightly. In addition, add wood glue to the joints and check if the corners are right-angled. Plan everything from the very beginning, if you want to get a professional result. See all my Premium Plans HERE.

 

Projects made from these plans

 Add-image

 

 

10×8 Gable Shed Plans

Building-a-10x8-shed

Building-a-10×8-shed

 

Cut List

  • A – 3 pieces of 4×4 lumber – 120″ long SKIDS
  • B – 2 pieces of 2×6 lumber – 120″ long, 9 pieces – 93″ long JOISTS
  • C – 2 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 24″x48″ long FLOOR
  • D – 2 piece of 2×4 lumber – 89″ long, 1 piece – 96″ long, 5 pieces – 84″ long SIDE WALL
  • E – 2 piece of 2×4 lumber – 120″ long, 1 piece – 113″ long, 8 pieces – 84″ long BACK WALL
  • F – 2 piece of 2×4 lumber – 89″ long, 1 piece – 96″ long, 6 pieces – 84″ long, 3 pieces – 8″ long, 3 pieces – 29″ long, 2 pieces – 36″ “long, 4 pieces of 2×6 lumber – 39” long SIDE WALL
  • G – 2 piece of 2×4 lumber – 24″ long, 1 piece – 120″ long, 1 piece – 113″ long, 6 pieces – 84″ long, 2 pieces – 78 1/2″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
  • G – 8 pieces of 5/8″ T1-11 siding – 48″x89 1/4″ long, 1 piece – 24″x8 1/2 long, 1 piece – 24″x89 1/4″ long SIDING

Shopping List

  • 3 pieces of 4×4 lumber – 10′
  • 13 pieces of 2×6 lumber – 8′
  • 2 pieces of 2×6 lumber – 10′
  • 3 piece of 3/4″ plywood – 4’x8′
  • 5 pieces of 2×4 lumber – 10′
  • 38 pieces of 2×4 lumber – 8′
  • 9 pieces of 5/8″ T1-11 siding – 4’x8′
  • 3 1/2″ screws, 1 5/8″ screws
  • wood glue, stain/paint
  • hinges, latch, handle

Time

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related:

 

 

Trim---Facebook-BoxMake sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. Trim---Facebook-Box-Down

 

 

Building a 10×8 gable shed

Floor frame

Floor frame

First, you need to frame the floor of the 10×8 shed. Build the components for the frame out of 2×6 lumber, making sure you take accurate measurements. In addition, use a saw to adjust the components to their size. Drill pilot holes through the perimeter joists and insert 3 1/2″ screws into the perpendicular components. Make sure the corners are square.

Fitting the skids to 10x8 shed

Fitting the skids to 10×8 shed

As you can easily notice in the diagram, I recommend you to build the skids out of 4×4 lumber. Mark the cut lines on the beams and get the job done by using a circular saw. Smooth the cut edges with fine-grit sandpaper and remove the residues with a vacuum. Repeat the process for the other two skids. Insert 3 1/2″ screws into the skids, after drilling pilot holes. Check if the edges are flush.

Floor sheets

Floor sheets

Afterwards, attach the 3/4″ plywood floor to the frame. Use a 4×8 plywood sheet, as you don’t have to make any adjustments. Make sure the corners are right-angled and the edges perfectly aligned before securing the sheet to the joists. Drill pilot holes through the sheets and insert 1 1/4″ screws into the joists, every 8″. Leave no gaps between the components, if you aim for a durable and professional result.

front-wall-frame---10x8-shed

front-wall-frame—10×8-shed

The next step of the shed project is to frame the front wall of the construction. As you can easily notice in the diagram, you need to build the components out of 2×4 lumber. Take accurate measurements and adjust their size to the right dimensions, to suit your needs. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Make sure the corners are square and install a double 2×6 header to the front wall.

Back-wall-frame---10x8-shed

Back-wall-frame—10×8-shed

Continue the woodworking project by framing the back wall. As you can see in the image, you need to double the studs placed at both ends of the wall, in order to add strength to the structure. Use the same techniques described above to assemble the back wall frame together.

Side-wall-frame---10x8-shed

Side-wall-frame—10×8-shed

Repeat the process for the side walls of the shed. Take accurate measurements before adjusting the size of the components, otherwise they won’t fit each other properly. Pre-drill the plates before inserting the 3 1/2″ screws into the studs, to prevent the wood from splitting. Make sure the corners are square and place the studs equally-spaced. Invest in high quality materials and work with attention.

Side-wall-with-window-frame

Side-wall-with-window-frame

Build the side wall with window for the shed, using the information in the diagram. You can adjust the size of the window opening, to suit your needs.

Assembling the shed frame

Assembling the shed frame

As you can notice in the diagram, you need to start the assembly with the front and back walls. Make sure the edges are flush and plumb them with a spirit level before securing them to the floor with galvanized screws. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor of the 8×4 shed. Use 2×4 temporarily braces, until you fit the side walls. Fit the side walls and then lock the adjacent walls together with screws.

Side wall with window siding

Side wall with window siding

After assembling the frame of the storage shed, we recommend you to install the 5/8″ T1-11 siding to the sides of the structure. Align the sheets to the top of the wall frames, making sure the edges are perfectly flush. Leave no gaps between the components and insert 2″ finishing nails into the studs, every 8″. Use a saw to make the cut outs, around the window opening.

Side wall siding

Side wall siding

Fit the siding sheets to the other side of the shed.

Front wall siding

Front wall siding

Fit the siding sheets to the front wall of the shed. Make a few cuts, so you can fit the panels around the door opening.

Back wall siding

Back wall siding

Fit the siding sheets to the back of the shed.

10x8 Gable Shed Plans

10×8 Gable Shed Plans

Make sure you check out PART 2 and PART 3 of the storage shed project, so you learn how to build the gable roof and the double front doors.

10x8 Gable Shed Plans - overall dimensions

10×8 Gable Shed Plans – overall dimensions

 

10x8 Gable Shed

10×8 Gable Shed

Last but not least, you should take care of the finishing touches. Therefore, fill the holes with wood putty and let the compound to dry out for several hours. Smooth the surface with medium-grit sandpaper along the wood grain.

Top Tip: Apply several coats of stain or paint to enhance the look of the shed and to protect the components from decay. Check out the rest of the projects to see how to build the roof and the door. If you want to get the project as a PDF file with 1 full cut list and 1 full shopping list, please take a look over the GET PDF PLANS button bellow.

 

 

This project was about 10×8 shed plans. If you want to see more outdoor plans, we recommend you to check out the rest of the projects. LIKE us on Facebook to the the first that gets our latest projects and send us pictures with your woodworking projects.

 

Next

 

 

 

EXPLORE MORE IDEAS FOR:

You may also like

3 comments

Chris -

What is height of this shed? Would be really cool if you had different roof pitch options for your designs.

Reply
Alma -

My current shed is sitting on a concrete slab that is high enough to prevent water from flowing in. The slab will accommodate a structure that is 10 ft wide by 8 ft deep. It has a concrete ramp centered on the 10 ft wall that accommodates double doors. It has a gable roof which gives me storage space on the rafters. Do you have a plan that will work for me?

Reply
Ovidiu -

No

Reply

Leave a Reply to Ovidiu Cancel Reply