Double Chair Bench with Table Plans

This step by step woodworking project is about double chair bench with table plans. This article features detailed instructions for building a nice double chair with table. The best part of this project is that you can build the wooden bench with table in less than a weekend. The total cost of the materials should be less than 30 dollars. We have designed the plans to keep the expenditures under control and to involve the least amount of work possible. It is an ideal project for a deck or a backyard patio. Premium Plans for this project available in the Shop.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the bench won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

Previous 1 … 3 4 5 6 7 Next

Double Chair Bench

DIY Simple Double Chair Bench

DIY Garden Bench with Cooler

DIY Wedding Double Chair Bench with Table

DIY Double chair bench with cooler

DIY Outdoor Bench with Seat

DIY 2x4 double chair bench

DIY Double chair bench with table

Building a double chair bench with cooler

Building a double chair garden bench

 

It’s that simple to build your own chair with table bench!

Double Chair Bench with Table Plans

Building a double chiar with table

Cut + Shopping List

• A – 2 pieces of 2×4 lumber – 58″ long, 4 pieces – 18″ long FRAME
• B – 2 pieces of 2×4 lumber – 23″ long, 2 pieces – 24 3/4″ long LEGS
• C – 2 pieces of 2×4 lumber – 21 3/4″ long SUPPORTS
• D – 4 pieces of 2×4 lumber – 24″ long BACKREST SUPPORTS
• E – 2 pieces of 1×4 lumber – 22 1/4″ long ARMRESTS
• F – 3 pieces of 1×4 lumber – 22″ long, 1 piece – 20 1/2″ long 2xSEAT
• G – 5 pieces of 1×4 lumber – 19″ long 2xBACKREST
• H – 2 pieces of 2×4 lumber – 12″ long, 2 pieces – 17″ long, 3 pieces of 1×6 lumber – 21 3/4″ long TABLE

• 6 pieces of 2×4 lumber – 8′
• 5 pieces of 1×4 lumber – 8′
• 1 piece of 1×6 lumber – 8′
• 100 pieces of 1 1/4″ screws
• 100 pieces of 2 1/2″ screws
• glue, stain

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• Large double chair bench plans
• Modern double chair bench with table plans

Make sure you follow us on Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow us on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Us with no extra costs to you. 

Step 1: How to build the frame for the double chair bench

Building-the-seat-frame

The first step of the project is to build the seat frame for the double chair bench. Use 2×4 lumber for the components, making sure you cut them at the right dimensions. Additionally, cut one end of the short components at 75 degrees. This means you have to set the miter saw to 15 degrees.

Drill pocket holes at both ends of the short components and secure them to the long components using 2 1/2″ screws. Add glue to the joints and make sure the corners are square. Also, leave no gaps between the components.

Step 2: Building the side frames for the double chair bench

Building the legs

Next, you need to build the legs for the double chair bench with table. Cut both ends of the back leg at 75 degrees. This means you need to set the miter saw at 15 degrees. Smooth the edges with sandpaper.

Back-legs-plans

You can see in the diagram more information about cutting the back legs. As I have already said, cut both ends at 75 degree, which means you need to make 15 degree cuts. Use the information from the diagram to build the back legs properly. The easiest way to get accurate angle cuts is to use a miter saw. Smooth the cut edges with sandpaper.

Attaching the armrest support

Continue the project by attaching the top support to the side legs. Cut one end of the 2×4 support at 75 degrees. Attach the support to the top of the legs, making sure the edges are perfectly aligned. Drill pilot holes and secure the support to the legs using 2 1/2″ screws. Pre-drilling prevents the wood from splitting.

Similarly, use a carpentry square to make sure the corners are 90 degrees. In addition, you an set the legs against a straight line, so you make sure they are aligned properly, before attaching the horizontal supports.

Step 3: Assembling the bench with table

Attaching the sides

After assembling the sides of the bench, you need to attach it to the seat frame, as shown in the diagram. Make sure the corners are square. Plumb the sides with a spirit level and check if the seat is perfectly horizontal. Insert 2 1/2″ screws through the frame into the legs.

Step 4: Attaching the backrest

Building the backrest supports

Build the backrest supports out of 2×4 lumber. Round the top corner of the supports using a jigsaw. Smooth the edges with sandpaper and remove the residues with a damp cloth.

Attaching the backrest supports

In addition, attach the supports to the seat frame, as shown in the diagram. Drill pilot holes through the supports and insert 2 1/2″ screws into the seat frame. Leave no gaps between the components.

Slats-for-the-bench-seat

Build the seat slats out of 1×4 lumber. Cut the components at the right dimensions and secure them to the frame using 1 1/4″ screws. Place the seat slats equally-spaced, if you want to get a professional result. Place a piece of 1/2″ plywood between the slats to get consistent gaps.

Fitting the backrest slats

Next, attach the 1×4 slats to the backrests of the chairs. Place the slats equally-spaced and lock them to the supports using 1 1/4″ screws. Smooth the edges with sandpaper. Align the edges before inserting the screws.

Attaching the armrests

Continue the project by building the armrests out of 1×4 lumber. Round one end of the components and smooth the edges with 120 grit sandpaper. Use 1 1/4″ screws to secure the armrests into place. Fill the holes with wood putty.

Step 5: Building the table for the bench

Table supports

One of the last steps of the woodworking project is to create the table for the bench. Start by attaching the 2×4 supports to the front face of the bench frame. Use 2 1/2″ screws to secure the supports to the frame

Fitting the tabletop supports

Next, fit the horizontal supports to the structure, as described in the diagram. Drill pocket holes at both ends of the support placed between the backrests. Use 2 1/2″ screws to lock them into place tightly.

Attaching the tabletop

Also, fit the 1×6 slats to the supports to create the tabletop. Leave 1/4″ between the slats and secure them to the frame using 1 1/4″ screws. Smooth the exposed edges with sandpaper.

Double chair bench with table plans

If you are looking for outdoor furniture plans or you are just trying to learn how to build an outdoor bench, this the perfect starting point to your woodworking journey. This double bench project is the right choice if like to relax on the front porch, or reading a good book next to the loved ones. The small table makes it easy to drink your coffee or a cold lemonade in the hot summer days, while breathing fresh air and watching the singing birds.

In addition, if you liked this patio furniture plan, then you would also love the corresponding chair. In this manner, you can create a relaxation area where you can hang out with your friends and family. These would also be perfect around a fire pit or under a pergola.

Double chair bench with table plans

One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.

How-to-build-a-double-chair-bench

You can see a full tutorial on how I built the double chair bench for my backyard HERE.

Double chair bench with table – dimensions

Double chair bench – Free DIY Plans

Top Tip: If you want to enhance the look of the project and to protect the wooden bench from decay, we recommend you to cover the components with paint or stain. You can get the premium plans for this project by clicking the GET PREMIUM PLANS bellow. If you want the free plans, just read the blog FAQs.

This woodworking project was about double chair bench with table plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects and to hep us keep adding free woodworking plans for you.

- EXPLORE MORE IDEAS FOR -