Looking to add a unique and functional piece to your chicken coop? This DIY chicken picnic table feeder plans is just the thing! It’s a simple and fun woodworking project that not only gives your chickens a cool place to eat but also adds a touch of charm to your backyard. To build a chicken picnic table feeder, start by cutting 1×2 boards for the tabletop and benches, and for the legs. Assemble the table by attaching the legs to the tabletop and adding bench supports underneath. Finish by sanding, painting or sealing, and adding a feeder tray in the center for the chickens. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Premium Plans for this project available in the Shop.
Building the chicken picnic table feeder is an affordable and quick project. You can expect to spend around $20-$40 on materials, including wood, screws, and paint or sealant. The entire project should take about 2-3 hours to complete, making it perfect for a weekend DIY activity.
For this project, I recommend using cedar or hardwood for their durability and natural resistance to the elements. Cedar is a fantastic option because it’s lightweight, rot-resistant, and has a beautiful, rustic look. Hardwood, on the other hand, provides superior strength and longevity, making your project a sturdy and stylish addition to your home.
Projects made from these plans
Chicken Picnic Table – Free Plans
Building-a-chicken-picnic-table
Cut and Shopping Lists
A – Legs – 1×2 lumber 9 3/4″ long – 4 pieces
B – Supports – 1×2 lumber 9″ long – 2 pieces
C – Supports – 1×2 lumber 20″ long – 2 pieces
C – Ledger – 1×2 lumber 15″ long – 1 piece
D – Seat – 1×2 lumber 18″ long – 4 pieces
E – Tray Slats – 1×2 lumber 16 1/2″ long – 5 pieces
F – Trims – 1×2 lumber 18″ long – 2 pieces
F – Trims – 1×2 lumber 9″ long – 2 pieces
- 1×2 lumber 8 ft – 3 pieces
- 1×2 lumber 6 ft – 1 pieces
- 1 5/8″ screws – 30 pieces
- 1 1/4″ screws – 10 pieces
- Wood glue – 1 can
- Stain – 1 can
Tools
Hammer, Tape measure, Framing square, Level
Miter saw, Drill machinery, Screwdriver, Sander
Time
One weekend
Related
Pin for Later!
Chicken Feeder – Building the frame
Building-the-legs
To kick off this project, we’re cutting the legs for the picnic table. Make 30 degree cuts to both ends of the 1×2 boards, as shown in the diagram. Use a miter saw, if available to get accurate and quick cuts.
Side-supports
Next, we need to cut to supports for the picnic table. Use 1×2 lumber and make 45 degree decorative cuts to both ends, as shown in the diagram. Smooth the edges with sandpaper.
Assembling-the-side-frames
Next up, we need to assemble the sides for the chicken picnic table. Lay everything on a level surface and mark the location of the legs on top of the horizontal supports.
Distance-between-supports
Use the info from the diagram to align all components together tightly. Drill pilot holes through the legs and insert 1 1/4″ screws into the supports. Use at least 2 screws for each joint.
Fitting-the-stretcher
Attach the 1×2 stretcher to the small picnic table. Center the stretcher to the seat supports. Drill pilot holes through the seat supports and insert 1 5/8″ screws to lock it into place.
Chicken Feeder – Building the tray
Assembling the tray
Now, let’s build the tray for the chicken feeder. Use 1×2 lumber for the components. Make 45 degree cuts to both ends of the trims and then assemble everything together with screws and glue.
Try-trims
Add glue between the boards and align the edges flush. Drill pilot holes and insert 1 5/8″ screws to assemble everything together tightly. See the info in the diagram for proper assembly.
Attaching-the-top-tray
Next up, center the tray into place, leaving 3/4″ overhangs on both sides. Drill pilot holes through the bottom slats of the tray and insert 1 5/8″ screws into the supports.
Fitting-the-seat-slats
Attach the 1×2 boards to the seat supports. Place a 1/4″ spacer between the boards to create a gap. Notice the 3/4″ overhangs on both sides. Drill pilot holes and insert 1 5/8″ screws to lock the boards into place tightly.
Picnic Table Feeder – Finishing touches
Chicken-picnic-feeder—dimensions
This picnic table it’s perfect for keeping your feathered friends happy and entertained.
DIY picnic table feeder
Chicken picnic table plans
For the finishing touches on our chicken picnic table, start by giving it a good sanding to smooth out any rough edges and ensure there are no splinters.
Next, apply a coat of non-toxic, food-safe sealant to protect the wood and make it easy to clean. Finally, add some cute little details like mini umbrellas or painted designs to give it a fun and personalized touch that your chickens will love!
Chicken picnic table – free plans
Your chickens now have a fun and functional picnic-style feeder, perfect for adding a unique touch to your coop. This elevated design helps keep the feed clean and easy to access, reducing waste and making feeding time a breeze. It’s a simple, practical project that not only looks great but also makes your chickens’ mealtime more enjoyable!
If you want to get the Premium plans with all the extras, just press the GET PREMIUM PLANS button bellow. If you want to get the free plans, just read the blog FAQs.
This woodworking project was about DIY chicken picnic table – free plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.
- EXPLORE MORE IDEAS FOR -
 |
 |
 |
 |
