Â
This step by step diy woodworking project is about folding stool plans. If you want to learn more about how to build a nice and simple folding stool, we recommend you to pay attention to the instructions described in the article. Work with attention and invest in the best materials you can afford, as the total investment is small and it will pay off on the long run.
There are certain aspects that you should take into account before starting the actual construction of the folding stool. Cut the components at the right size and align them at both ends before inserting the galvanized screws. It is essential to make sure the corners are right-angled before locking the components together. Apply a few coats of stain over the wooden components, to protect them from decay. See all my Premium Plans HERE.
Â
Â
Projects made from these plans
Â
Â
Cut & Shopping Lists
- A – 4 pieces of 1×2 lumber – 24″ long LEGS
- B – 2 pieces of 1×2 lumber – 12 1/2″ long, 2 pieces – 11″ long, 2 pieces – 15″ long SUPPORTS
- C – 4 sq ft of fabric SEAT
Tools
 Hammer, Tape measure, Framing square, Level
 Miter saw, Drill machinery, Screwdriver, Sander
 Safety Gloves, Safety Glasses
Time
 One day
Related
Â
Â
Building a folding stool
Building a folding stool
Â
Top Tip: Don’t hesitate to adjust the size of the folding chair to your needs, before assembling the components together and inserting the screws.Â
Â
Â
Â
Â
Folding Stool Plans
Building the side of the stool
The first step of the project is to build the frame of the folding stool. In order to get the job done as a professional, we recommend you to build one side of the stool following the instructions shown in the plans.
Cut the components at the right size out of 1×2 lumber. Drill pocket holes at both ends of the horizontal components before inserting the 1 1/4″ screws into the wooden legs. Add waterproof glue to enhance the rigidity of the structure. Drill pilot holes through the top support and insert 1 1/4″ screws into the legs. Make sure the corners are square.
Building the other side of the stool
Continue the project in the same manner described above, as to build the other side of the folding stool. Follow the instructions described in the plans to get the job done in a professional manner.
Top Tip: Make sure you check if the corners are right-angled before inserting the galvanized screws, by using a carpentry square. Center the supports to the wooden legs before inserting the screws into place.
Building the frame of the stool
The next step of the project is to lock the frames of the chair together. It is essential to lean the frames at the right angle before inserting the bolts, otherwise the end result might not look as expected.
Legs
Take accurate measurements before drilling the pilot holes.
Inserting the bolt
After aligning the components at both ends, we recommend you to drill pilot holes through the components and to insert the 2″ bolts on both sides of the frame. In order to get the job done in a professional manner, we recommend you to fit washers on both sides and between the frames.
If you plan everything with attention and use quality materials, the end result will suit your needs and enhance the look of your garden.
Folding stool plans
One of the last steps of the woodworking project is to take care of the finishing touches. Therefore, fill the pilot holes with wood putty and smooth the surface with 120-grit sandpaper.
Top Tip:Â In order to protect the lumber from water damage, we recommend you to cover the components with several coats of paint. Place the folding chair in a proper location and move it whenever necessary. Attach the seat fabric to the top of the stool.
Â
Â
This woodworking project was about folding stool plans. If you want to see more outdoor plans, we recommend you to check out the rest of our step by step projects. LIKE us on Facebook and Google + to be the first that gets out latest projects.
Â
- EXPLORE MORE IDEAS FOR -
 |
 |
 |
 |
