10×14 Double Shed Door Plans

This step by step diy project is about 10×14 double shed doors plans. This is PART 3 of the gable shed project, where I show you how to build the double front doors for the storage shed. Moreover, you can fit the decorative trims to enhance the look of the shed. Make sure you read the local codes so you can comply with the legal requirements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

10×14 Shed Doors Plans

Building-a-10×14-gable-shed

Cut & Shopping Lists

• N – 1 piece of 1×4 lumber – 79″ long, 2 pieces – 87 1/2″ long JAMBS
• O – 2 pieces of T1-11 siding – 36″x87 1/2″ long, 2 pieces of 1×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long 2xDOOR

• 2 pieces of T1-11 siding – 4’x8′
• 10 pieces of 2×4 lumber – 8′
• 2 piece of 1×4 lumber – 8′
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 4d nails, 6d nails
• 2 brad nails, 1 1/5″ brad nails
• hinges & latch
• wood filler , wood glue, stain/paint

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 10×14 Gable Shed Plans 
• PART 2: 10×14 Gable Shed Plans
• PART 3: Double Shed Doors Plans

Building the doors for the shed

Double-door-jambs

Fit the 2×4 jambs around the double door opening. Fit the jams flush and insert 2 1/2″ screws to secure them into place tightly.

Building-the-double-doors

Build the door panels from T1-11 siding (the panel that you have cut out in the previous steps). Use 2×4 lumber for the trims. Align the edges flush and use 2″ brad nails to assemble the door.

Fitting the double doors

Fit the double doors to the opening and lock them to the jambs with hinges. Moreover, install a latch and handles, so you can open and close the doors easily.

Window trims

Fit the window to the opening. Fit 1×4 trims around the window. Align the edges and insert 2″ brad nails to secure them into place.

10×16 Shed Plans

You can fit decorative trims to the shed, so you hide the corners and so you can add a polished look to the shed. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.

This woodworking project was about shed double doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -