10×14 Double Shed Door Plans


This step by step diy project is about 10×14 double shed doors plans. This is PART 3 of the gable shed project, where I show you how to build the double front doors for the storage shed. Moreover, you can fit the decorative trims to enhance the look of the shed. Make sure you read the local codes so you can comply with the legal requirements. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.



Projects made from these plans




10×16 Shed Doors Plans

Building a 10x14 shed

Building a 10×14 shed


  • N – 1 piece of 1×4 lumber – 79″ long, 2 pieces – 87 1/2″ long JAMBS
  • O – 2 pieces of T1-11 siding – 36″x87 1/2″ long, 2 pieces of 1×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long 2xDOOR

 One day



Building the doors for the shed

Double door jambs

Double door jambs

Fit the 2×4 jambs around the double door opening. Fit the jams flush and insert 2 1/2″ screws to secure them into place tightly.

Building the double doors

Building the double doors

Build the door panels from T1-11 siding (the panel that you have cut out in the previous steps). Use 2×4 lumber for the trims. Align the edges flush and use 2″ brad nails to assemble the door.

Fitting the double doors

Fitting the double doors

Fit the double doors to the opening and lock them to the jambs with hinges. Moreover, install a latch and handles, so you can open and close the doors easily.

Window trims

Window trims

Fit the window to the opening. Fit 1×4 trims around the window. Align the edges and insert 2″ brad nails to secure them into place.

10x16 Shed Plans

10×16 Shed Plans

You can fit decorative trims to the shed, so you hide the corners and so you can add a polished look to the shed. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.



This woodworking project was about shed double doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.




Kids                Garden                Animals                 Planter

Car                Indoor               Furniture               Shed