Â
This step by step diy woodworking project is about outdoor planters plans. This article features easy to follow instructions for building vertical planters. I have designed this project so that you use 6′ cedar pickets to keep the costs down. In addition, the cedar slats will be much more resistant to moisture than regular pine. Take a look over the rest of our woodworking plans, if you want to get more building inspiration.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.
Â
Â
Projects made from these plans
Â
Â
Outdoor Planters Plans
![Building wood vertical planters](http://myoutdoorplans.com/wp-content/uploads/2016/02/Building-wood-vertical-planters-600x348.jpg)
Building wood vertical planters
Â
Cut & Shopping Lists
- A – 2 pieces of 1×6 lumber – 12 3/4″ long, 2 pieces – 15″ long 6xPLANTER
- B – 3 pieces of 1×6 lumber – 12 3/4″ long 6xBOTTOM
- C – 1 pieces of 1×6 lumber – 48″ long, 2 piece – 60″ long LEGS
- D – 4 pieces of 1×6 lumber – 28″ long BASE
- 13 pieces of 1×6 lumber – 6′
- 100 pieces of 1 1/4″ screws
- 100 pieces of 2″ brad nails
- wood glue, stain/paint
Tools
 Hammer, Tape measure, Framing square, Level
 Miter saw, Drill machinery, Screwdriver, Sander
 Safety Gloves, Safety Glasses
Time
Related
Â
Â
Â
Â
Building planters from cedar pickets
![Building the base](http://myoutdoorplans.com/wp-content/uploads/2016/02/Building-the-base-600x348.jpg)
Building the base
The first step of the project is to build the side support. Cut the 1×6 cedar pickets at the right size, as shown in the diagram. Smooth the edges with sandpaper.
![Building the short support](http://myoutdoorplans.com/wp-content/uploads/2016/02/Building-the-short-support-600x348.jpg)
Building the short support
Attach the base components to the vertical supports. Align everything making sure the corners are square. Drill pilot holes and insert 1 1/4″ screws on both sides. Add waterproof glue to the joints.
![Building the planters](http://myoutdoorplans.com/wp-content/uploads/2016/02/Building-the-planters-600x348.jpg)
Building the planters
Build the frame of the planters from 1×6 cedar pickets. Align the edges until they are flush and add glue to the joints. Insert 2″ brad nails to enhance the bond of the structure, after making sure the corners are right-angled.
![Attaching the bottom slats](http://myoutdoorplans.com/wp-content/uploads/2016/02/Attaching-the-bottom-slats-600x348.jpg)
Attaching the bottom slats
Attach the slats to the bottom of the planters. Align the edges and insert 1 1/4″ screws to lock them into place. Drill pilot holes to prevent the wood from splitting. Add waterproof glue to the joints.
![Attaching the support](http://myoutdoorplans.com/wp-content/uploads/2016/02/Attaching-the-support-600x348.jpg)
Attaching the support
Next, you need to attach the planters to the vertical support. Make sure you pay attention to the diagram when spacing the planters. In addition, you need to check if the corners are square. Center the support to the planters and insert 1 1/4″ galvanized screws. Add glue to the joints and insert at least 4 screws for each joint.
![Assembling the first unit](http://myoutdoorplans.com/wp-content/uploads/2016/02/Assembling-the-first-unit-600x348.jpg)
Assembling the first unit
Attach the other leg to the vertical planters. Use a spirit level to make sure the legs are plumb before inserting the 1 1/4″ screws. Center the leg to the planters, as shown in the diagram.
![Attaching the long supports](http://myoutdoorplans.com/wp-content/uploads/2016/02/Attaching-the-long-supports-600x348.jpg)
Attaching the long supports
You then need to attach the other planters, as shown in the diagram. As you can easily notice the vertical support should be cut at 60″, slightly larger than the one placed on the other side.
![Fitting the second row of planters](http://myoutdoorplans.com/wp-content/uploads/2016/02/Fitting-the-second-row-of-planters-600x348.jpg)
Fitting the second row of planters
As you can notice, you need to place the planters equally spaced. Drive screws through the vertical supports into the planters. Use 4 screws for each joint and add lots of waterproof glue.
![Outdoor Planters Plans](http://myoutdoorplans.com/wp-content/uploads/2016/02/Outdoor-Planters-Plans-600x348.jpg)
Outdoor Planters Plans
Next, you need to drill some drainage holes through the bottom of the planters and fill them with soil. Choose the soil with attention, making sure it’s the best for the flowers you are going to plant.
![Tiered Planters Plans](http://myoutdoorplans.com/wp-content/uploads/2016/02/Tiered-Planters-Plans-600x348.jpg)
Tiered Planters Plans
You can apply a few coats of paint over the exterior of the planter, if you want to enhance the look of the vertical planters. This project is ideal for any deck or patio, if you want to enhance the look of your property and bring bright colors.
![Building vertical planters](http://myoutdoorplans.com/wp-content/uploads/2016/02/Building-vertical-planters-600x348.jpg)
Building vertical planters
Fill the holes with wood putty and let them dry out for a few hours. Smooth the surface with 100-220 grit sandpaper and remove the residues with a damp cloth.
Top Tip:Â Apply a few coats of paint or stain to the components, to enhance the look of the project. You can even build several planter and join them together so that you create a privacy screen made from lively flowers.
Â
Â
This woodworking project was about outdoor planters plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.
Â
2 comments
C- should say 2 pieces of 1×6 at 60″ and 1 piece at 48″
Thanks! It was the other way around in the list… 🙂