This step by step diy project is about 8×8 firewood shed plans. This shed can hold up to 3 cords of wood, so it is small sized. This shed features a large opening and a generous overhang to the front, and the other sides of the shed are enclosed with siding sheet, to protect the wood from the elements. The floor boards have 1″ gaps between them so the air can flow freely and dry the firewood. My plans come with step by step drawings and with a complete cut / shopping list. Make sure you read the local codes and make adjustments if necessary. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.
Projects made from these plans
8×8 Firewood Shed Plans
Building-a-8×8 firewood shed
Cut & Shopping Lists
- A – 22 pieces of 2×4 lumber – 96″ long FLOOR
- B – 4 pieces of 4×4 lumber – 96″ long SKIDS
- C – 2 pieces of 2×4 lumber – 96″ long, 1 piece – 89″ long, 9 pieces – 75 1/2″ long BACK WALL
- D – 2 pieces of 2×4 lumber – 89″ long, 1 piece – 96″ long, 7 pieces – 75 1/2″ long 2xSIDE WALL
- E – 2 pieces of 2×4 lumber – 12″ long, 1 piece – 89″ long, 1 piece – 96″ long, 6 pieces – 75 1/2″ long, 2 pieces – 70″ long, 2 pieces of 2×6 lumber – 75″ long FRONTÂ WALL
- F – 8 pieces of T1-11 siding – 48″x81 1/2″ long SIDING
- 4 pieces of 4×4 lumber – 8′
- 54 pieces of 2×4 lumber – 8′
- 2 pieces of 2×6 lumber – 8′
- 8 pieces of 5/8″ T1-11 siding
- 8d galvanized screws
- 3 1/2″ screws
- rafter ties
- wood glue, stain/paint, wood filler
Tools
 Hammer, Tape measure, Framing square, Level
 Miter saw, Drill machinery, Screwdriver, Sander
 Safety Gloves, Safety Glasses
Time
One week
Related
- PART 1: 8×8 Firewood Shed Plans
- PART 2: 8×8 Firewood Shed Roof Plans
Building a 8×8 gable firewood shed
Building-the-floor-for-the-8×8-wood-shed
First of all you have to assemble the floor frame for the firewood shed. Use 4×4 lumber for the skids and then attach 2×4 boards. Use a 1″ spacer between the boards to create even gaps. Align the edges flush and drill pilot holes. Insert 2 1/2″ screws to secure the boards into place tightly. Make sure the diagonals are equal and check if the corners are right angled.
Back-wall-frame—8×8-wood-shed
Use 2×4 lumber for the back wall frame. Cut the studs at 75 1/2″ and then secure them to the plates with 3 1/2″ screws or nails. Place the studs every 16″ on center and make sure the corners are square. Use double studs at both ends of the wall frame.
Side wall frame – 8×8 wood storage shed
Assemble the side walls in the same manner described above. Measure the diagonals of the wall and make sure they are perfectly equal.
Building-the-front-wall-frame-for-shed
Building the front wall is a more complex job, as you need to frame the door opening. In addition, you need to fit the double header to the top of the opening. Build the header from 2 pieces of 2×6 lumber and 1/2″ plywood. Glue the components of the header together and insert screws to lock everything tightly.
Assembling the shed frame – 8×8 wood shed
Fit the frames to the floor of the shed. Align the edges flush and make sure the corners are square. In addition, use a spirit level to make sure the walls are plumb. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor of the 8×8 firewood shed. Don’t forget to lock the adjacent walls together, as well.
Side wall panels – 8×8 shed
Use 5/8″ T1-11 siding sheets for the side walls. Align the edges flush and leave no gaps between the sheets. Insert 8d nails, every along the framing. Alternatively, you can use 1×6 boards for the exterior of the firewood shed, or even metal sheets.
Front wall panels – 8×8 firewood shed
Fit the sheets to the front of the 3 cord firewood shed and make the cuts around the opening.
Back wall panels – 8×8 firewood shed
Attach the siding sheets to the back of the shed. Align the edges flush and insert 8d galvanized nails to secure the sheets to the wall frames. Align everything with attention and insert the nails every 8″ along the studs.
Building-a-8×8-small-wood-shed
This is a medium small firewood shed that features an elegant look an a super sturdy framing. The shed has a gable roof and a large front opening for an easy access inside. This is a simple shed for wood storage, but not necessarily the cheapest. I have lots of firewood shed plans, so make sure you check them all before starting the project.
8×8 Firewood Shed Plans – front view
With little effort you can build a beautiful firewood shed to keep all the logs dry and well organized. You can use this shed for storing other items, such as bags, boxes or equipment.
8×8 Firewood Shed Plans – back view
This is a beautiful and simple 8×8 shed that can be built with a small budget and hold up to 3 cords of wood. The conservative design makes it ideal for any household because it will actually add value and be an attraction point of the garden. Don’t forget to take a look over PART 2 of the project, so you learn how to build the roof for the shed. If you build these, I would love to see your project. You should also take a look over my other 3 cord firewood shed plans.
This woodworking project was about 8×8 firewood shed plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.
Â
Â
EXPLORE MORE IDEAS FOR:
 |
 |
 |
 |
