8×12 Shed Doors Plans

This step by step diy project is about 8×12 shed doors plans. This is PART 3 of the gable shed project, where I show you how to build the single and the double doors for the shed. The 3 ft wide doors are made from 2x4s (frame) and T1-11 siding (panel). Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day. See all my Premium Plans HERE.

Projects made from these plans

8×12 Shed Doors Plans

Building-a-8×12-shed

Cut + Shopping Lists

• Unlock Lists

Tools

 Hammer, Tape measure, Framing square, Level

 Miter saw, Drill machinery, Screwdriver, Sander

 Safety Gloves, Safety Glasses

Time

 One day

Related

• PART 1: 8×12 Gable Shed Plans 
• PART 2: 8×12 Gable Shed Plans
• PART 3: Double Shed Doors Plans

How to build double doors for a 8×12 shed

Fitting-the-door-jambs

Fit the 2×4 jambs around the large door opening. Align the edges flush, drill holes and insert 2 1/2″ screws to lock them into place. In addition, install the 24″x36″ window to the opening and then attach the 1×4 decorative trims around it. Use 2″ nails to secure the trims into place.

Door-frame

Use 2×4 lumber for the door trims. Cut the boards as shown in the diagram and drill pocket holes at both ends of the vertical and middle components. Lay everything on a level surface and align the edges flush. Make sure the corners are square and insert 2 1/2″ screws to assemble the 2 frames.

Door-panel

Build the door panels from T1-11 siding (the panel that you have cut out in the previous steps). Lay the panels over the door frames and insert 1 5/8″ screws to lock them into place tightly. Add glue to the joints.

Fitting-the-double-doors

Fit the doors into place and align everything with attention. Use hinges and install a latch to keep them locked.

8×12 Shed Plans

This 8×12 shed is an amazing addition to your backyard. You will create a lot of extra storage space and you will declutter your home from items you don’t need or not use. Check out PART 1 and PART 2 of the shed, so you can learn everything you need to know about building the floor, walls and roof for the shed.

This woodworking project was about shed doors plans. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

- EXPLORE MORE IDEAS FOR -